[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20061213130721.GG3851@stusta.de>
Date: Wed, 13 Dec 2006 14:07:21 +0100
From: Adrian Bunk <bunk@...sta.de>
To: amitkale@...xen.com
Cc: jgarzik@...ox.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: drivers/net/netxen/: usage of uninitialized variables
The Coverity checker spotted the following places where variables are
being used uninitialized:
drivers/net/netxen/netxen_nic_ethtool.c:
<-- snip -->
...
static u32 netxen_nic_get_link(struct net_device *dev)
{
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
__le32 status;
/* read which mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if (adapter->phy_read
&& adapter->phy_read(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
&status) != 0)
return -EIO;
else
return (netxen_get_phy_link(status));
...
<-- snip -->
"status" is not initiazlized if !adapter->phy_read.
drivers/net/netxen/netxen_nic_ethtool.c:
<-- snip -->
...
static int
netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd
*ecmd)
{
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
__le32 status;
/* read which mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
/* autonegotiation */
if (adapter->phy_write
&& adapter->phy_write(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
(__le32) ecmd->autoneg) != 0)
return -EIO;
else
port->link_autoneg = ecmd->autoneg;
if (adapter->phy_read
&& adapter->phy_read(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
&status) != 0)
return -EIO;
/* speed */
switch (ecmd->speed) {
case SPEED_10:
netxen_set_phy_speed(status, 0);
break;
case SPEED_100:
netxen_set_phy_speed(status, 1);
break;
case SPEED_1000:
netxen_set_phy_speed(status, 2);
break;
}
...
<-- snip -->
"status" is not initiazlized if !adapter->phy_read.
drivers/net/netxen/netxen_nic_isr.c:
<-- snip -->
void netxen_handle_port_int(struct netxen_adapter *adapter, u32 portno,
u32 enable)
{
__le32 int_src;
struct netxen_port *port;
/* This should clear the interrupt source */
if (adapter->phy_read)
adapter->phy_read(adapter, portno,
NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
&int_src);
if (int_src == 0) {
DPRINTK(INFO, "No phy interrupts for port #%d\n", portno);
return;
}
...
<-- snip -->
"int_src" is not initiazlized if !adapter->phy_read.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists