Linux version 2.6.19.1 (root@highlander) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Thu Dec 21 19:49:41 CET 2006 Command line: root=/dev/sda6 ro video=vesafb vga=extended BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable) BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data) BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 262048) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fae40 ACPI: XSDT (v001 A M I OEMXSDT 0x10000603 MSFT 0x00000097) @ 0x000000003ffa0100 ACPI: FADT (v003 A M I OEMFACP 0x10000603 MSFT 0x00000097) @ 0x000000003ffa0290 ACPI: MADT (v001 A M I OEMAPIC 0x10000603 MSFT 0x00000097) @ 0x000000003ffa0390 ACPI: MCFG (v001 A M I OEMMCFG 0x10000603 MSFT 0x00000097) @ 0x000000003ffa0400 ACPI: OEMB (v001 A M I AMI_OEM 0x10000603 MSFT 0x00000097) @ 0x000000003ffae040 ACPI: HPET (v001 A M I OEMHPET 0x10000603 MSFT 0x00000097) @ 0x000000003ffa8d50 ACPI: DSDT (v001 A0667 A0667000 0x00000000 INTL 0x20060113) @ 0x0000000000000000 Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 262048) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 262048 On node 0 totalpages: 261950 DMA zone: 56 pages used for memmap DMA zone: 10 pages reserved DMA zone: 3932 pages, LIFO batch:0 DMA32 zone: 3526 pages used for memmap DMA32 zone: 254426 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009e000 - 000000000009f000 Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) PERCPU: Allocating 33408 bytes of per cpu data Built 1 zonelists. Total pages: 258358 Kernel command line: root=/dev/sda6 ro video=vesafb vga=extended Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1025880k/1048192k available (1624k kernel code, 21560k reserved, 709k data, 212k init) Calibrating delay using timer specific routine.. 4804.12 BogoMIPS (lpj=9608244) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) Freeing SMP alternatives: 20k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 16666719 Detected 16.666 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.02 BogoMIPS (lpj=9600048) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2400.007 MHz processor. migration_cost=29 checking if image is initramfs... it is Freeing initrd memory: 2490k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: 00:08: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: f8700000-fe7fffff PREFETCH window: bfe00000-dfdfffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:1c.4 IO window: b000-bfff MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: a000-afff MEM window: fe800000-fe8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: fea00000-feafffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered io scheduler noop registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 212k freed input: AT Translated Set 2 keyboard as /class/input/input0 NET: Registered protocol family 1 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Getting cpuindex for acpiid 0x4 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.00 loaded. ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:02.2[B] -> GSI 20 (level, low) -> IRQ 20 usb 3-2: new full speed USB device using uhci_hcd and address 2 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff000-feaff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 3-2: USB disconnect, address 2 ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00310163af] PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ilck stag led pmp pio ata1: SATA max UDMA/133 cmd 0xFFFFC20000064900 ctl 0x0 bmdma 0x0 irq 507 ata2: SATA max UDMA/133 cmd 0xFFFFC20000064980 ctl 0x0 bmdma 0x0 irq 507 ata3: SATA max UDMA/133 cmd 0xFFFFC20000064A00 ctl 0x0 bmdma 0x0 irq 507 ata4: SATA max UDMA/133 cmd 0xFFFFC20000064A80 ctl 0x0 bmdma 0x0 irq 507 ata5: SATA max UDMA/133 cmd 0xFFFFC20000064B00 ctl 0x0 bmdma 0x0 irq 507 ata6: SATA max UDMA/133 cmd 0xFFFFC20000064B80 ctl 0x0 bmdma 0x0 irq 507 scsi0 : ahci usb 3-2.3: new low speed USB device using uhci_hcd and address 4 ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000f9b6dc] usb 3-2.3: configuration #1 chosen from 1 choice ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48 ata1.00: ata1: dev 0 multi count 0 ata1.00: configured for UDMA/133 scsi1 : ahci usb 3-2.4: new low speed USB device using uhci_hcd and address 5 usb 3-2.4: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2.3 input: Microsoft Microsoft SideWinder Precision Pro (USB) as /class/input/input2 input: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder Precision Pro (USB)] on usb-0000:00:1d.0-2.4 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-6, max UDMA/100, 160836480 sectors: LBA48 ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for UDMA/100 scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA HDS722580VLSA80 V32O PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata7: SATA max UDMA/133 cmd 0xFFFFC200000C4100 ctl 0x0 bmdma 0x0 irq 16 ata8: SATA max UDMA/133 cmd 0xFFFFC200000C4180 ctl 0x0 bmdma 0x0 irq 16 scsi6 : ahci ata7: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata8: SATA link down (SStatus 0 SControl 300) SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb3 < sdb5 sdb6 > sd 2:0:0:0: Attached scsi disk sdb kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1) agpgart: Detected an Intel 965G Chipset. agpgart: AGP aperture is 256M @ 0x0 input: PC Speaker as /class/input/input3 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.10 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 sky2 eth0: addr 00:18:f3:c6:8a:c1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.1 to 64 ata9: PATA max UDMA/100 cmd 0xBC00 ctl 0xB882 bmdma 0xB400 irq 17 ata10: PATA max UDMA/100 cmd 0xB800 ctl 0xB482 bmdma 0xB408 irq 17 scsi8 : pata_jmicron ata9.00: ATAPI, max UDMA/33 ata9.01: ATAPI, max UDMA/66 ata9.00: configured for UDMA/33 ata9.01: configured for UDMA/66 scsi9 : pata_jmicron ATA: abnormal status 0x7F on port 0xB807 scsi 8:0:0:0: CD-ROM BENQ DVD DD DW1640 BSRB PQ: 0 ANSI: 5 scsi 8:0:1:0: CD-ROM PIONEER DVD-ROM DVD-106 1.22 PQ: 0 ANSI: 5 PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 23 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 8:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray sr 8:0:1:0: Attached scsi CD-ROM sr1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 sr 8:0:0:0: Attached scsi generic sg2 type 5 sr 8:0:1:0: Attached scsi generic sg3 type 5 Adding 3212960k swap on /dev/sdb1. Priority:-1 extents:1 across:3212960k EXT3 FS on sda6, internal journal TCP cubic registered fuse init (API version 7.7) device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. sky2 eth0: enabling interface NET: Registered protocol family 17 sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Unable to handle kernel NULL pointer dereference at 0000000000000010 RIP: [] :nfs:nfs_update_inode+0x93/0x578 PGD 18377067 PUD 1812f067 PMD 0 Oops: 0000 [1] PREEMPT SMP CPU 0 Modules linked in: snd_rtctimer binfmt_misc cpufreq_userspace cpufreq_powersave rpcsec_gss_krb5 auth_rpcgss nfs lockd nfs_acl sunrpc button ac battery autofs4 ipv6 af_packet dm_snapshot dm_mirror dm_mod kvm_intel kvm fuse w83781d hwmon_vid hwmon i2c_isa eeprom speedstep_centrino cpufreq_conservative cpufreq_ondemand freq_table tcp_cubic snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq sg sr_mod cdrom snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep psmouse snd serio_raw i2c_i801 pata_jmicron floppy sky2 pcspkr soundcore intel_agp joydev evdev eth1394 ext3 jbd mbcache sd_mod usbhid ff_memless ohci1394 ieee1394 ehci_hcd ahci libata scsi_mod uhci_hcd usbcore thermal processor fan unix Pid: 5938, comm: umount Not tainted 2.6.19.1 #1 RIP: 0010:[] [] :nfs:nfs_update_inode+0x93/0x578 RSP: 0018:ffff8100183cdc88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8100353562d0 RCX: 00000000000081a4 RDX: ffff810029d1cbc0 RSI: ffff8100353562d0 RDI: ffff81002b50e1b8 RBP: ffff81002b50e1b8 R08: 00000000000081a4 R09: 0000000000000000 R10: 0000000000000000 R11: ffff810037ff5680 R12: ffff81002b50e000 R13: ffff81002b50e1b8 R14: ffff81003e45e0c0 R15: ffff8100353562d0 FS: 00002ba98e1b41f0(0000) GS:ffffffff81248000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000010 CR3: 000000001d76f000 CR4: 00000000000026e0 Process umount (pid: 5938, threadinfo ffff8100183cc000, task ffff81002c05a1c0) Stack: ffff81002b50e1b8 ffff8100353562d0 ffff81002b50e26c ffff81002b50e1b8 ffff81003e45e0c0 ffffffff8836b691 ffff810035356200 0000000000000000 ffff81001f451e40 ffffffff88379a33 ffff810023edc5e0 ffff810029d1cbc0 Call Trace: [] :nfs:nfs_post_op_update_inode+0x36/0x47 [] :nfs:nfs4_proc_delegreturn+0x142/0x1a3 [] :nfs:nfs_do_return_delegation+0x17/0x2a [] :nfs:nfs_dentry_iput+0x1b/0x4f [] shrink_dcache_for_umount_subtree+0x20f/0x264 [] shrink_dcache_for_umount+0x35/0x43 [] generic_shutdown_super+0x1b/0x11d [] kill_anon_super+0xf/0x36 [] :nfs:nfs_kill_super+0xd/0x16 [] deactivate_super+0x49/0x61 [] expire_mount_list+0x124/0x164 [] shrink_submounts+0x36/0xdc [] sys_umount+0x102/0x228 [] sys_newstat+0x19/0x31 [] system_call+0x7e/0x83 Code: 48 3b 68 10 75 2a 48 8d 8a b0 00 00 00 48 8d 43 60 48 8b 73 RIP [] :nfs:nfs_update_inode+0x93/0x578 RSP CR2: 0000000000000010 <6>note: umount[5938] exited with preempt_count 1