linux-kernel - cypress_m8 spews garbage on ppc64 but is ok on x86

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <8bd0f97a0612232259k5a0ac0c8k8dceee2227678a86@mail.gmail.com>
Date:	Sun, 24 Dec 2006 01:59:00 -0500
From:	"Mike Frysinger" <vapier.adi@...il.com>
To:	dignome@...il.com
Cc:	linux-kernel@...r.kernel.org
Subject: cypress_m8 spews garbage on ppc64 but is ok on x86

anyone tried using the cypress_m8 usb serial cable on a G5 ?  just
tried it on a ppc64/2.6.19.1 kernel and all i get back is garbage when
hooked up to serial console of a board running at 57600 baud

plugged the same cable into my x86 machine and it works OK there
Bus 001 Device 010: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM
RS232 Adapter

plugged a pl2303 into the ppc64 and that worked fine too
Bus 001 Device 011: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port

$ uname -a
Linux G5 2.6.19.1 #2 SMP Sun Dec 24 00:53:03 EST 2006 ppc PPC970MP,
altivec supported PowerMac11,2 GNU/Linux

$ stty -F /dev/ttyUSB0
speed 57600 baud; line = 0;
flush = ^U; min = 1; time = 5;
ignbrk -brkint -icrnl ixoff -imaxbel
-opost -onlcr
-isig -icanon -iexten -echo -echoe -echok -echoctl -echoke

find attached logs after doing `modprobe cypress_m8 debug=1`
 * setup of /dev/ttyUSB0 to proper serial settings
 * the board running `yes` and spewing "y" over the serial console to my machine
-mike

Download attachment "cypress-yes.log.bz2" of type "application/x-bzip2" (1138 bytes)

Download attachment "cypress-setup.log.bz2" of type "application/x-bzip2" (905 bytes)