| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1167408137.4154.8.camel@dumbo>
Date: Fri, 29 Dec 2006 08:02:17 -0800
From: Sumant Patro <sumantp@...l.com>
To: James.Bottomley@...elEye.com, akpm@...l.org
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
neela.kolli@....com, bo.yang@....com, sumant.patro@....com
Subject: [Patch] scsi: megaraid_{mm,mbox}: init fix for kdump
- Changes in Initialization to fix kdump failure.
Without this fix, megaraid driver either panics or fails to
initialize the adapter during the kdump's 2nd kernel boot
if there are pending commands or interrupts from other devices
sharing the same IRQ.
Fix:Send SYNC command on loading.
This command clears the pending commands in the adapter
and re-initialize its internal RAID structure.
Signed-Off By: Sumant Patro <sumant.patro@....com>
diff -uprN linux-2.6.orig/Documentation/scsi/ChangeLog.megaraid linux-2.6.new/Documentation/scsi/ChangeLog.megaraid
--- linux-2.6.orig/Documentation/scsi/ChangeLog.megaraid 2006-12-28 10:10:31.000000000 -0800
+++ linux-2.6.new/Documentation/scsi/ChangeLog.megaraid 2006-12-29 06:57:44.000000000 -0800
@@ -1,3 +1,16 @@
+Release Date : Thu Nov 16 15:32:35 EST 2006 - Sumant Patro <sumant.patro@....com>
+Current Version : 2.20.5.1 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
+
+1. Changes in Initialization to fix kdump failure.
+Without this fix, megaraid driver either panics or fails to
+initialize the adapter during the kdump's 2nd kernel boot
+if there are pending commands or interrupts from other devices
+sharing the same IRQ.
+ - Send SYNC command on loading.
+ This command clears the pending commands in the adapter
+ and re-initialize its internal RAID structure.
+
Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@...l.com>
Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.c linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.c
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.c 2006-12-28 09:56:04.000000000 -0800
+++ linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.c 2006-12-29 05:31:48.000000000 -0800
@@ -10,13 +10,13 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.9 (Jul 16 2006)
+ * Version : v2.20.5.1 (Nov 16 2006)
*
* Authors:
- * Atul Mukker <Atul.Mukker@...l.com>
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@...l.com>
- * Manoj Jose <Manoj.Jose@...l.com>
- * Seokmann Ju <Seokmann.Ju@...l.com>
+ * Atul Mukker <Atul.Mukker@....com>
+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@....com>
+ * Manoj Jose <Manoj.Jose@....com>
+ * Seokmann Ju <Seokmann.Ju@....com>
*
* List of supported controllers
*
@@ -107,6 +107,7 @@ static int megaraid_mbox_support_random_
static int megaraid_mbox_get_max_sg(adapter_t *);
static void megaraid_mbox_enum_raid_scsi(adapter_t *);
static void megaraid_mbox_flush_cache(adapter_t *);
+static int megaraid_mbox_fire_sync_cmd(adapter_t *);
static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
static void megaraid_mbox_setup_device_map(adapter_t *);
@@ -137,7 +138,7 @@ static int wait_till_fw_empty(adapter_t
-MODULE_AUTHOR("sju@...l.com");
+MODULE_AUTHOR("sumant.patro@....com");
MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_VERSION);
@@ -779,6 +780,22 @@ megaraid_init_mbox(adapter_t *adapter)
goto out_release_regions;
}
+ // initialize the mutual exclusion lock for the mailbox
+ spin_lock_init(&raid_dev->mailbox_lock);
+
+ // allocate memory required for commands
+ if (megaraid_alloc_cmd_packets(adapter) != 0) {
+ goto out_iounmap;
+ }
+
+ /*
+ * Issue SYNC cmd to flush the pending cmds in the adapter
+ * and initialize its internal state
+ */
+
+ if (megaraid_mbox_fire_sync_cmd(adapter))
+ con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
+
//
// Setup the rest of the soft state using the library of FW routines
//
@@ -789,22 +806,13 @@ megaraid_init_mbox(adapter_t *adapter)
con_log(CL_ANN, (KERN_WARNING
"megaraid: Couldn't register IRQ %d!\n", adapter->irq));
+ goto out_alloc_cmds;
- goto out_iounmap;
- }
-
-
- // initialize the mutual exclusion lock for the mailbox
- spin_lock_init(&raid_dev->mailbox_lock);
-
- // allocate memory required for commands
- if (megaraid_alloc_cmd_packets(adapter) != 0) {
- goto out_free_irq;
}
// Product info
if (megaraid_mbox_product_info(adapter) != 0) {
- goto out_alloc_cmds;
+ goto out_free_irq;
}
// Do we support extended CDBs
@@ -875,7 +883,7 @@ megaraid_init_mbox(adapter_t *adapter)
* accessed
*/
if (megaraid_sysfs_alloc_resources(adapter) != 0) {
- goto out_alloc_cmds;
+ goto out_free_irq;
}
// Set the DMA mask to 64-bit. All supported controllers as capable of
@@ -920,10 +928,10 @@ megaraid_init_mbox(adapter_t *adapter)
out_free_sysfs_res:
megaraid_sysfs_free_resources(adapter);
-out_alloc_cmds:
- megaraid_free_cmd_packets(adapter);
out_free_irq:
free_irq(adapter->irq, adapter);
+out_alloc_cmds:
+ megaraid_free_cmd_packets(adapter);
out_iounmap:
iounmap(raid_dev->baseaddr);
out_release_regions:
@@ -3380,6 +3388,86 @@ megaraid_mbox_flush_cache(adapter_t *ada
/**
+ * megaraid_mbox_fire_sync_cmd - fire the sync cmd
+ * @param adapter : soft state for the controller
+ */
+static int
+megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
+{
+ mbox_t *mbox;
+ uint8_t raw_mbox[sizeof(mbox_t)];
+ mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
+ mbox64_t *mbox64;
+ uint8_t status = 0;
+ int i;
+ uint32_t dword;
+
+ mbox = (mbox_t *)raw_mbox;
+
+ memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
+
+ raw_mbox[0] = 0xFF;
+
+ mbox64 = raid_dev->mbox64;
+ mbox = raid_dev->mbox;
+
+ /*
+ * Wait until mailbox is free
+ */
+ if (megaraid_busywait_mbox(raid_dev) != 0) {
+ status = 1;
+ goto blocked_mailbox;
+ }
+
+ /*
+ * Copy mailbox data into host structure
+ */
+ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
+ mbox->cmdid = 0xFE;
+ mbox->busy = 1;
+ mbox->poll = 0;
+ mbox->ack = 0;
+ mbox->numstatus = 0;
+ mbox->status = 0;
+
+ wmb();
+ WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
+
+ // wait for maximum 1 min for status to post.
+ // If the Firmware SUPPORTS the ABOVE COMMAND,
+ // mbox->cmd will be set to 0
+ // else
+ // the firmware will reject the command with
+ // mbox->numstatus set to 1
+
+ i = 0;
+ status = 0;
+ while (!mbox->numstatus && mbox->cmd == 0xFF) {
+ rmb();
+ msleep(1);
+ i++;
+ if (i > 1000 * 60) {
+ status = 1;
+ break;
+ }
+ }
+ if (mbox->numstatus == 1)
+ status = 1; /*cmd not supported*/
+ /*
+ * Check for interrupt line
+ */
+ dword = RDOUTDOOR(raid_dev);
+ WROUTDOOR(raid_dev, dword);
+ WRINDOOR(raid_dev,2);
+
+ return status;
+
+blocked_mailbox:
+ con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
+ return status;
+}
+
+/**
* megaraid_mbox_display_scb - display SCB information, mostly debug purposes
* @param adapter : controllers' soft state
* @param scb : SCB to be displayed
diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.h linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.h
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.h 2006-12-28 09:56:04.000000000 -0800
+++ linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.h 2006-12-29 05:31:50.000000000 -0800
@@ -21,8 +21,8 @@
#include "megaraid_ioctl.h"
-#define MEGARAID_VERSION "2.20.4.9"
-#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)"
+#define MEGARAID_VERSION "2.20.5.1"
+#define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)"
/*
View attachment "megaraid-initialization-fix-for-kdump.patch" of type "text/x-patch" (6968 bytes)
Powered by blists - more mailing lists