linux-kernel - [PATCH 2.6.20-rc2] Add a quirk to allow ENE PCI SD card readers to work again

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4E9DF295D4%linux@youmustbejoking.demon.co.uk>
Date:	Sun, 31 Dec 2006 17:08:20 +0000
From:	Darren Salt <linux@...mustbejoking.demon.co.uk>
To:	linux-kernel@...r.kernel.org, drzeus-mmc@...eus.cx,
	sdhci-devel@...t.drzeus.cx
Subject: [PATCH 2.6.20-rc2] Add a quirk to allow ENE PCI SD card readers to work again

Add a quirk to allow ENE PCI SD card readers to work again

Support for these devices was broken for 2.6.18-rc1 and later by commit
146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level support.

This restores the previous behaviour for these devices by ensuring that when
the voltage is changed, only one write to set the voltage is performed.

It may be that both writes are needed if the voltage is being changed between
two non-zero values or that it's safe to ensure that only one write is done
if the hardware only supports one voltage; I don't know whether either is the
case nor can I test since I have only the one SD reader (1524:0550), and it
supports just the one voltage.

Signed-off-by: Darren Salt <linux@...mustbejoking.demon.co.uk>

diff -ur linux-2.6.20-rc2.orig/drivers/mmc/sdhci.c linux-2.6.20-rc2/drivers/mmc/sdhci.c
--- linux-2.6.20-rc2.orig/drivers/mmc/sdhci.c	2006-12-30 15:34:11.000000000 +0000
+++ linux-2.6.20-rc2/drivers/mmc/sdhci.c	2006-12-31 16:43:50.000000000 +0000
@@ -37,6 +37,7 @@
 #define SDHCI_QUIRK_FORCE_DMA				(1<<1)
 /* Controller doesn't like some resets when there is no card inserted. */
 #define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)

 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
@@ -65,6 +66,16 @@
 		.driver_data	= SDHCI_QUIRK_FORCE_DMA,
 	},

+	{
+		.class		= PCI_CLASS_SYSTEM_SDHCI << 8,
+		.class_mask	= 0xFFFF00,
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
@@ -669,16 +680,17 @@

 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
-	u8 pwr;
+	u8 pwr = 0;

 	if (host->power == power)
 		return;

-	writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
 	if (power == (unsigned short)-1)
 		goto out;

+	if ((host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE) == 0)
+		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
 	pwr = SDHCI_POWER_ON;

 	switch (power) {

-- 
| Darren Salt    | linux or ds at              | nr. Ashington, | Toon
| RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army
|   Kill all extremists!

Confucius say: Many pages make thick book.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/