linux-kernel - [PATCH 2.6.20-rc3] fix for bugzilla #7544 (keyspan USB-to-serial converter)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <87ejqcdvo6.fsf@semtex.sncag.com>
Date:	Wed, 03 Jan 2007 15:36:25 +0100
From:	Rainer Weikusat <rainer.weikusat@...ag.com>
To:	Greg KH <greg@...ah.com>,
	"linux-kernel@...r.kernel.orgRainer Weikusat" <rweikusat@...ag.com>
Cc:	linux-kernel@...r.kernel.org, Rainer Weikusat <rweikusat@...ag.com>
Subject: [PATCH 2.6.20-rc3] fix for bugzilla #7544 (keyspan USB-to-serial converter)

At least the Keyspan USA-19HS USB-to-serial converter supports
two different configurations, one where the input endpoints
have interrupt transfer type and one where they are bulk endpoints.
The default UHCI configuration uses the interrupt input endpoints.
The keyspan driver, OTOH, assumes that the device has only bulk
endpoints (all URBs are initialized by calling usb_fill_bulk_urb
in keyspan.c/ keyspan_setup_urb). This causes the interval field
of the input URBs to have a value of zero instead of one, which
'accidentally' worked with Linux at least up to 2.6.17.11 but
stopped to with 2.6.18, which changed the UHCI support code handling
URBs for interrupt endpoints. The patch below modifies to driver to
initialize its input URBs either as interrupt or as bulk URBs,
depending on the transfertype contained in the associated endpoint
descriptor (only tested with the default configuration) enabling
the driver to again receive data from the serial converter.

Signed-off-by: Rainer Weikusat <rweikusat@...ag.com>
---

Modified to no longer call panic, but return NULL after having
logged a KERN_WARNING message first.

diff -purN linux-2.6.20-rc3/drivers/usb/serial/keyspan.c linux-2.6.20-rc3-keyspan/drivers/usb/serial/keyspan.c
--- linux-2.6.20-rc3/drivers/usb/serial/keyspan.c	2007-01-02 11:10:22.000000000 +0100
+++ linux-2.6.20-rc3-keyspan/drivers/usb/serial/keyspan.c	2007-01-03 15:18:24.000000000 +0100
@@ -1275,11 +1275,32 @@ static int keyspan_fake_startup (struct 
 }
 
 /* Helper functions used by keyspan_setup_urbs */
+static struct usb_endpoint_descriptor const *
+find_ep_desc_for(struct usb_serial const *serial, int endpoint)
+{
+	struct usb_host_endpoint const *p, *e;
+
+	p = serial->interface->cur_altsetting->endpoint;
+	e = p + serial->interface->cur_altsetting->desc.bNumEndpoints;
+	while (p < e && p->desc.bEndpointAddress != endpoint) ++p;
+	
+	if (p == e) {
+		printk(KERN_WARNING "%s - found no endpoint descriptor for "
+		       "endpoint %d\n", __func__, endpoint);
+		return NULL;
+	}
+
+	return &p->desc;
+}
+
 static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
 				      int dir, void *ctx, char *buf, int len,
 				      void (*callback)(struct urb *))
 {
 	struct urb *urb;
+	struct usb_endpoint_descriptor const *ep_desc;
+	char const *ep_type_name;
+	unsigned ep_type;
 
 	if (endpoint == -1)
 		return NULL;		/* endpoint not needed */
@@ -1290,12 +1311,34 @@ static struct urb *keyspan_setup_urb (st
 		dbg ("%s - alloc for endpoint %d failed.", __FUNCTION__, endpoint);
 		return NULL;
 	}
+	
+	ep_desc = find_ep_desc_for(serial, endpoint);
+	ep_type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_INT:
+		ep_type_name = "INT";
+		usb_fill_int_urb(urb, serial->dev,
+				 usb_sndintpipe(serial->dev, endpoint) | dir,
+				 buf, len, callback, ctx,
+				 ep_desc->bInterval);
+		break;
 
-		/* Fill URB using supplied data. */
-	usb_fill_bulk_urb(urb, serial->dev,
-		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
-		      buf, len, callback, ctx);
+	case USB_ENDPOINT_XFER_BULK:
+		ep_type_name = "BULK";
+		usb_fill_bulk_urb(urb, serial->dev,
+				  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+				  buf, len, callback, ctx);
+		break;
+
+	default:
+		printk(KERN_WARNING "%s - unsupported endpoint type %d\n",
+		       __func__, ep_type);
+		usb_free_urb(urb);
+		return NULL;
+	}
 
+	dbg("%s - using urb %p for %s endpoint %d",
+	    __func__, urb, ep_type_name, endpoint);
 	return urb;
 }
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/