| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200701051055.45845.openembedded@hrw.one.pl>
Date: Fri, 5 Jan 2007 10:55:45 +0100
From: Marcin Juszkiewicz <openembedded@....one.pl>
To: linux-kernel@...r.kernel.org
Cc: Russell King <rmk+lkml@....linux.org.uk>,
Richard Purdie <rpurdie@...ys.net>
Subject: Re: [PATCH] backlight control for Frontpath ProGear HX1050+
Dnia piątek, 5 stycznia 2007 09:23, Russell King napisał:
> On Fri, Jan 05, 2007 at 09:03:30AM +0100, Marcin Juszkiewicz wrote:
> > Index: linux-2.6.18/drivers/video/backlight/progear_bl.c
> > + printk("ALI M7101 PMU not found.\n");
> > + return(-1);
>
> There are enumerated constants for these return values. Please use the
> proper and appropriate constants.
Thx. Fixed version below.
From: Marcin Juszkiewicz <openembedded@....one.pl>
Add control of LCD backlight for Frontpath ProGear HX1050+.
Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.
Signed-Off-By: Marcin Juszkiewicz <openembedded@....one.pl>
---
Patch follow kernel version 2.6.19-rc6
Kconfig | 8 +++
Makefile | 1
progear_bl.c | 155 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 164 insertions(+)
Index: linux-2.6.18/drivers/video/backlight/Kconfig
===================================================================
--- linux-2.6.18.orig/drivers/video/backlight/Kconfig 2007-01-04 22:27:59.000000000 +0100
+++ linux-2.6.18/drivers/video/backlight/Kconfig 2007-01-04 22:29:39.000000000 +0100
@@ -66,3 +66,11 @@
If you have a HP Jornada 680, say y to enable the
backlight driver.
+config BACKLIGHT_PROGEAR
+ tristate "Frontpath ProGear Backlight Driver"
+ depends on BACKLIGHT_DEVICE && PCI
+ default y
+ help
+ If you have a Frontpath ProGear say Y to enable the
+ backlight driver.
+
Index: linux-2.6.18/drivers/video/backlight/Makefile
===================================================================
--- linux-2.6.18.orig/drivers/video/backlight/Makefile 2007-01-04 22:27:59.000000000 +0100
+++ linux-2.6.18/drivers/video/backlight/Makefile 2007-01-04 22:28:43.000000000 +0100
@@ -5,3 +5,4 @@
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
+obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
Index: linux-2.6.18/drivers/video/backlight/progear_bl.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/drivers/video/backlight/progear_bl.c 2007-01-05 08:48:41.000000000 +0100
@@ -0,0 +1,155 @@
+/*
+ * Backlight Driver for Frontpath ProGear HX1050+
+ *
+ * Copyright (c) 2006 Marcin Juszkiewicz
+ *
+ * Based on Progear LCD driver by M Schacht
+ * <mschacht at alumni dot washington dot edu>
+ *
+ * Based on Sharp's Corgi Backlight Driver
+ * Based on Backlight Driver for HP Jornada 680
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <asm/uaccess.h>
+
+#define PMU_LPCR 0xB0
+#define SB_MPS1 0x61
+#define HW_LEVEL_MAX 0x77
+#define HW_LEVEL_MIN 0x4f
+
+static int progearbl_intensity;
+static struct backlight_properties progearbl_data;
+static struct backlight_device *progear_backlight_device;
+
+struct pci_dev *pmu_dev = NULL;
+struct pci_dev *sb_dev = NULL;
+
+static int progearbl_send_intensity(struct backlight_device *bd)
+{
+ int intensity = bd->props->brightness;
+
+ if (bd->props->power != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
+
+ progearbl_intensity = intensity;
+
+ return 0;
+}
+
+static int progearbl_get_intensity(struct backlight_device *bd)
+{
+ return progearbl_intensity;
+}
+
+static int progearbl_set_intensity(struct backlight_device *bd)
+{
+ progearbl_send_intensity(progear_backlight_device);
+ return 0;
+}
+
+static struct backlight_properties progearbl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = progearbl_get_intensity,
+ .update_status = progearbl_set_intensity,
+};
+
+static int progearbl_probe(struct platform_device *pdev)
+{
+ u8 temp;
+
+ pmu_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
+ if(!pmu_dev) {
+ printk("ALI M7101 PMU not found.\n");
+ return -ENODEV;
+ }
+
+ sb_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
+ if(!sb_dev) {
+ printk("ALI 1533 SB not found.\n");
+ return -ENODEV;
+ }
+
+/* Set SB_MPS1 to enable brightness control.*/
+ pci_read_config_byte(sb_dev, SB_MPS1, &temp);
+ pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
+
+ progear_backlight_device = backlight_device_register ("progear-bl",
+ NULL, &progearbl_data);
+ if (IS_ERR (progear_backlight_device))
+ return PTR_ERR (progear_backlight_device);
+
+ progearbl_data.power = FB_BLANK_UNBLANK;
+ progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
+ progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
+ progearbl_send_intensity(progear_backlight_device);
+
+ printk("ProGear Backlight Driver Initialized.\n");
+ return 0;
+}
+
+static int progearbl_remove(struct platform_device *dev)
+{
+ backlight_device_unregister(progear_backlight_device);
+
+ printk("ProGear Backlight Driver Unloaded\n");
+ return 0;
+}
+
+static struct platform_driver progearbl_driver = {
+ .probe = progearbl_probe,
+ .remove = progearbl_remove,
+ .driver = {
+ .name = "progear-bl",
+ },
+};
+
+static struct platform_device *progearbl_device;
+
+static int __init progearbl_init(void)
+{
+ int ret = platform_driver_register(&progearbl_driver);
+ if (!ret) {
+ progearbl_device = platform_device_alloc("progear-bl", -1);
+ if (!progearbl_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(progearbl_device);
+
+ if (ret) {
+ platform_device_put(progearbl_device);
+ platform_driver_unregister(&progearbl_driver);
+ }
+ }
+ return ret;
+}
+
+static void __exit progearbl_exit(void)
+{
+ platform_device_unregister(progearbl_device);
+ platform_driver_unregister(&progearbl_driver);
+}
+
+module_init(progearbl_init);
+module_exit(progearbl_exit);
+
+MODULE_AUTHOR("Marcin Juszkiewicz <linux@....one.pl>");
+MODULE_DESCRIPTION("ProGear Backlight Driver");
+MODULE_LICENSE("GPL");
--
JID: hrw-jabber.org
OpenEmbedded developer/consultant
42? 7 and a half million years and all you can come up with is 42?!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists