| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070106024139.GM20714@stusta.de> Date: Sat, 6 Jan 2007 03:41:39 +0100 From: Adrian Bunk <bunk@...sta.de> To: Joe Jin <lkmaillist@...il.com> Cc: linux-kernel@...r.kernel.org, Ingo Molnar <mingo@...e.hu>, Arjan van de Ven <arjan@...ux.intel.com> Subject: Re: BUG: sleeping function called from invalid context at kernel/rwsem.c:20 On Thu, Dec 21, 2006 at 11:07:27AM +0800, Joe Jin wrote: > Hi, > > While running 2.6.20-rc1 kernel on my PC, next info reported: Thanks for your report. Is this issue still present in kernel 2.6.20-rc3? And was it already present in kernel 2.6.19? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > BUG: sleeping function called from invalid context at kernel/rwsem.c:20 > in_atomic():0, irqs_disabled():1 > no locks held by proc/580. > irq event stamp: 9992 > hardirqs last enabled at (9991): [<c02ed9c6>] _spin_unlock_irq+0x20/0x41 > hardirqs last disabled at (9992): [<c0120b16>] vprintk+0x36/0x2a8 > softirqs last enabled at (9166): [<c0105e0b>] do_softirq+0x64/0xeb > softirqs last disabled at (9157): [<c0105e0b>] do_softirq+0x64/0xeb > [<c011db12>] __might_sleep+0xca/0xd0 > [<c0134121>] down_read+0x15/0x49 > [<c012bd5f>] blocking_notifier_call_chain+0xe/0x29 > [<c015d719>] sys_munmap+0x1a/0x3e > [<c0103ef8>] syscall_call+0x7/0xb > ======================= > WARNING at kernel/lockdep.c:2396 check_flags() > [<c0138790>] check_flags+0x92/0x145 > [<c0138869>] lock_acquire+0x26/0x81 > [<c013419c>] down_read_trylock+0x47/0x4e > [<c02ef47c>] do_page_fault+0x1e7/0x5b8 > [<c02ef47c>] do_page_fault+0x1e7/0x5b8 > [<c02ee62b>] do_debug+0x8f/0xbe > [<c02ef295>] do_page_fault+0x0/0x5b8 > [<c02edd6c>] error_code+0x7c/0x84 > ======================= > irq event stamp: 10015 > hardirqs last enabled at (10015): [<c02ed9c6>] _spin_unlock_irq+0x20/0x41 > hardirqs last disabled at (10014): [<c02ed571>] _spin_lock_irq+0xc/0x44 > softirqs last enabled at (9166): [<c0105e0b>] do_softirq+0x64/0xeb > softirqs last disabled at (9157): [<c0105e0b>] do_softirq+0x64/0xeb > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > > HW env: > > Dell Optix620 > CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz HT > MEM: 2G > > output of lspci > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory > Controller Hub (rev 02) > Subsystem: Dell: Unknown device 01ad > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: <available only to root> > > 00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express > Root Port (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fe900000-fe9fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: <available only to root> > > 00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express > Integrated Graphics Controller (rev 02) (prog-if 00 [VGA]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at e898 [size=8] > Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at feac0000 (32-bit, non-prefetchable) [size=256K] > Capabilities: <available only to root> > > 00:02.1 Display controller: Intel Corporation 945G/GZ Express > Integrated Graphics Controller (rev 02) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K] > Capabilities: <available only to root> > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 1 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fe800000-fe8fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: <available only to root> > > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 2 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fe700000-fe7fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: <available only to root> > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #1 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 4: I/O ports at ff80 [size=32] > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #2 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at ff60 [size=32] > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #3 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 22 > Region 4: I/O ports at ff40 [size=32] > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #4 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 19 > Region 4: I/O ports at ff20 [size=32] > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller (rev 01) (prog-if 20 [EHCI]) > Subsystem: Dell: Unknown device 01ad > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] > Capabilities: <available only to root> > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: <available only to root> > > 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 > Family) AC'97 Audio Controller (rev 01) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at ec00 [size=256] > Region 1: I/O ports at e8c0 [size=64] > Region 2: Memory at feabfa00 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at feabf900 (32-bit, non-prefetchable) [size=256] > Capabilities: <available only to root> > > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: <available only to root> > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ffa0 [size=16] > > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) > Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP > SecO PriP PriO]) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 0: I/O ports at fe00 [size=8] > Region 1: I/O ports at fe10 [size=4] > Region 2: I/O ports at fe20 [size=8] > Region 3: I/O ports at fe30 [size=4] > Region 4: I/O ports at fea0 [size=16] > Capabilities: <available only to root> > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev > 01) > Subsystem: Dell: Unknown device 01ad > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at e8a0 [size=32] > > 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 > Gigabit Ethernet PCI Express (rev 01) > Subsystem: Dell Optiplex GX620 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <available only to root> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > > Output of dmesg: > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Linux version 2.6.20-rc1 (joe.jin@...jin-pc) (gcc version 3.4.6 > 20060404 (Red Hat 3.4.6-3)) #1 SMP PREEMPT Mon Dec 18 09:31:49 CST > 2006 > BIOS-provided physical RAM map: > sanitize start > sanitize end > copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: > 00000000000a0000 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: > 0000000000100000 type: 2 > copy_e820_map() start: 0000000000100000 size: 000000007f586c00 end: > 000000007f686c00 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 000000007f686c00 size: 0000000000002000 end: > 000000007f688c00 type: 4 > copy_e820_map() start: 000000007f688c00 size: 0000000000002000 end: > 000000007f68ac00 type: 3 > copy_e820_map() start: 000000007f68ac00 size: 0000000000975400 end: > 0000000080000000 type: 2 > copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: > 00000000f4000000 type: 2 > copy_e820_map() start: 00000000fec00000 size: 0000000000100400 end: > 00000000fed00400 type: 2 > copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: > 00000000feda0000 type: 2 > copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: > 00000000fef00000 type: 2 > copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: > 0000000100000000 type: 2 > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f686c00 (usable) > BIOS-e820: 000000007f686c00 - 000000007f688c00 (ACPI NVS) > BIOS-e820: 000000007f688c00 - 000000007f68ac00 (ACPI data) > BIOS-e820: 000000007f68ac00 - 0000000080000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 1142MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000fe710 > Entering add_active_range(0, 0, 521862) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 521862 > early_node_map[1] active PFN ranges > 0: 0 -> 521862 > On node 0 totalpages: 521862 > DMA zone: 56 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4040 pages, LIFO batch:0 > Normal zone: 3080 pages used for memmap > Normal zone: 222200 pages, LIFO batch:31 > HighMem zone: 3998 pages used for memmap > HighMem zone: 288488 pages, LIFO batch:31 > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP (v002 DELL ) @ 0x000feb00 > ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 > ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b > ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 > ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f > ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 > ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 > ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 > ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e > ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) > ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) > Detected 3192.302 MHz processor. > Built 1 zonelists. Total pages: 514728 > Kernel command line: ro root=LABEL=/1 vga=794 > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c043f000 soft=c043b000 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour dummy device 80x25 > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 30 > ... MAX_LOCKDEP_KEYS: 2048 > ... CLASSHASH_SIZE: 1024 > ... MAX_LOCKDEP_ENTRIES: 8192 > ... MAX_LOCKDEP_CHAINS: 16384 > ... CHAINHASH_SIZE: 8192 > memory used by lock dependency info: 1064 kB > per task-struct memory footprint: 1200 bytes > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2050384k/2087448k available (1988k kernel code, 35908k > reserved, 1044k data, 236k init, 1169944k highmem) > virtual kernel memory layout: > fixmap : 0xfff4a000 - 0xfffff000 ( 724 kB) > pkmap : 0xffc00000 - 0xffe00000 (2048 kB) > vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc03fb000 - 0xc0436000 ( 236 kB) > .data : 0xc02f1052 - 0xc03f63b4 (1044 kB) > .text : 0xc0100000 - 0xc02f1052 (1988 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > Using HPET for base-timer > Calibrating delay using timer specific routine.. 6391.84 BogoMIPS > (lpj=12783698) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 > 0000649d 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 > 0000649d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (24) available > CPU0: Thermal monitoring enabled > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 11k freed > ACPI: Core revision 20060707 > CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 > lockdep: not fixing up alternatives. > Booting processor 1/1 eip 2000 > CPU 1 irqstacks, hard=c0440000 soft=c043c000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 6384.15 BogoMIPS > (lpj=12768313) > CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 > 0000649d 00000000 00000000 > monitor/mwait feature present. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 > 0000649d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel P4/Xeon Extended MCE MSRs (24) available > CPU1: Thermal monitoring enabled > CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 > Total of 2 processors activated (12776.00 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=35 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > Boot video device is 0000:00:02.0 > PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 0880-08bf claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 10 devices > intel_rng: FWH not detected > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > pnp: 00:01: ioport range 0x800-0x85f could not be reserved > pnp: 00:01: ioport range 0xc00-0xc7f has been reserved > pnp: 00:01: ioport range 0x860-0x8ff could not be reserved > pnp: 00:09: ioport range 0x100-0x1fe could not be reserved > pnp: 00:09: ioport range 0x200-0x277 has been reserved > pnp: 00:09: ioport range 0x280-0x2e7 has been reserved > pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved > pnp: 00:09: ioport range 0x300-0x377 could not be reserved > pnp: 00:09: ioport range 0x380-0x3bb has been reserved > pnp: 00:09: ioport range 0x3c0-0x3e7 has been reserved > pnp: 00:09: ioport range 0x3f6-0x3f7 could not be reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: fe900000-fe9fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: fe800000-fe8fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: fe700000-fe7fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 65536 (order: 9, 2359296 bytes) > TCP bind hash table entries: 32768 (order: 8, 1179648 bytes) > TCP: Hash tables configured (established 65536 bind 32768) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 512k freed > Simple Boot Flag at 0x7a set to 0x1 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > apm: disabled - APM is not SMP safe. > audit: initializing netlink socket (disabled) > audit(1166435081.576:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > Allocate Port Service[0000:00:01.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > Allocate Port Service[0000:00:1c.1:pcie03] > vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 5120k, > total 7872k > vesafb: mode is 1280x1024x16, linelength=2560, pages=2 > vesafb: protected mode interface info at 00ff:44f0 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 160x64 > fb0: VESA VGA frame buffer device > ACPI: Getting cpuindex for acpiid 0x3 > ACPI: Getting cpuindex for acpiid 0x4 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > [drm] Initialized drm 1.1.0 20060810 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > Probing IDE interface ide0... > hda: PHILIPS DVD+/-RW DVD8801, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > TCP bic registered > Initializing XFRM netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Starting balanced_irq > Using IPI Shortcut mode > Freeing unused kernel memory: 236k freed > Time: tsc clocksource has been installed. > SCSI subsystem initialized > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00ac7 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 > ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 > scsi0 : ata_piix > ata1.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 > ata1.00: ata1: dev 0 multi count 8 > ata1.00: configured for UDMA/133 > scsi1 : ata_piix > scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-75N 10.0 PQ: 0 ANSI: 5 > SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > > sd 0:0:0:0: Attached scsi disk sda > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > warning: process `kmodule' used the removed sysctl system call with 1.23. > Floppy drive(s): fd0 is 1.44M > floppy0: no floppy controllers found > tg3.c:v3.70 (December 1, 2006) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) > 10/100/1000Base-T Ethernet 00:13:72:85:ea:24 > eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] > TSOcap[1] > eth0: dma_rwctrl[76180000] dma_mask[64-bit] > ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1e.2 to 64 > intel8x0_measure_ac97_clock: measured 53605 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 > agpgart: Detected an Intel 945G Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xe0000000 > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usb 1-6: new high speed USB device using ehci_hcd and address 4 > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ff80 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > usb 1-6: configuration #1 chosen from 1 choice > hub 1-6:1.0: USB hub found > hub 1-6:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ff60 > usb 2-1: new low speed USB device using uhci_hcd and address 2 > usb 2-1: configuration #1 chosen from 1 choice > input: Dell Dell USB Keyboard as /class/input/input0 > input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1 > usb 2-2: new low speed USB device using uhci_hcd and address 3 > usb 2-2: configuration #1 chosen from 1 choice > input: USB Optical Mouse as /class/input/input1 > input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000ff40 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ff20 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [VBTN] > Using specific hotkey driver > ibm_acpi: ec object not found > EXT3 FS on sda10, internal journal > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > dm-devel@...hat.com > device-mapper: multipath: version 1.0.5 loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda9, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 2096440k swap on /dev/sda8. Priority:-1 extents:1 across:2096440k > IA-32 Microcode Update Driver: v1.14a <tigran@...azian.fsnet.co.uk> > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is off for TX and off for RX. > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > lp0: using parport0 (interrupt-driven). > lp0: console ready > Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > NFSD: unable to find recovery directory /var/lib/nfs/v4recovery > NFSD: starting 90-second grace period > hda: tray open > end_request: I/O error, dev hda, sector 0 > Buffer I/O error on device hda, logical block 0 > Buffer I/O error on device hda, logical block 1 > Buffer I/O error on device hda, logical block 2 > Buffer I/O error on device hda, logical block 3 > Buffer I/O error on device hda, logical block 4 > Buffer I/O error on device hda, logical block 5 > Buffer I/O error on device hda, logical block 6 > Buffer I/O error on device hda, logical block 7 > hda: tray open > end_request: I/O error, dev hda, sector 0 > Buffer I/O error on device hda, logical block 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > Buffer I/O error on device hda, logical block 1 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > hda: tray open > end_request: I/O error, dev hda, sector 0 > hda: tray open > end_request: I/O error, dev hda, sector 4 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 > [drm] Initialized i915 1.6.0 20060119 on minor 0 > BUG: sleeping function called from invalid context at kernel/rwsem.c:20 > in_atomic():0, irqs_disabled():1 > no locks held by proc/580. > irq event stamp: 9992 > hardirqs last enabled at (9991): [<c02ed9c6>] _spin_unlock_irq+0x20/0x41 > hardirqs last disabled at (9992): [<c0120b16>] vprintk+0x36/0x2a8 > softirqs last enabled at (9166): [<c0105e0b>] do_softirq+0x64/0xeb > softirqs last disabled at (9157): [<c0105e0b>] do_softirq+0x64/0xeb > [<c011db12>] __might_sleep+0xca/0xd0 > [<c0134121>] down_read+0x15/0x49 > [<c012bd5f>] blocking_notifier_call_chain+0xe/0x29 > [<c015d719>] sys_munmap+0x1a/0x3e > [<c0103ef8>] syscall_call+0x7/0xb > ======================= > WARNING at kernel/lockdep.c:2396 check_flags() > [<c0138790>] check_flags+0x92/0x145 > [<c0138869>] lock_acquire+0x26/0x81 > [<c013419c>] down_read_trylock+0x47/0x4e > [<c02ef47c>] do_page_fault+0x1e7/0x5b8 > [<c02ef47c>] do_page_fault+0x1e7/0x5b8 > [<c02ee62b>] do_debug+0x8f/0xbe > [<c02ef295>] do_page_fault+0x0/0x5b8 > [<c02edd6c>] error_code+0x7c/0x84 > ======================= > irq event stamp: 10015 > hardirqs last enabled at (10015): [<c02ed9c6>] _spin_unlock_irq+0x20/0x41 > hardirqs last disabled at (10014): [<c02ed571>] _spin_lock_irq+0xc/0x44 > softirqs last enabled at (9166): [<c0105e0b>] do_softirq+0x64/0xeb > softirqs last disabled at (9157): [<c0105e0b>] do_softirq+0x64/0xeb > hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling... > usb 2-2: USB disconnect, address 3 > usb 2-2: new low speed USB device using uhci_hcd and address 4 > usb 2-2: configuration #1 chosen from 1 choice > input: USB Optical Mouse as /class/input/input2 > input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2 > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > > kernel config file > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.20-rc1 > # Mon Dec 18 09:16:10 2006 > # > CONFIG_X86_32=y > CONFIG_GENERIC_TIME=y > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_X86=y > CONFIG_MMU=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_DMI=y > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > # CONFIG_IPC_NS is not set > CONFIG_POSIX_MQUEUE=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_BSD_PROCESS_ACCT_V3=y > CONFIG_TASKSTATS=y > CONFIG_TASK_DELAY_ACCT=y > # CONFIG_UTS_NS is not set > CONFIG_AUDIT=y > CONFIG_AUDITSYSCALL=y > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > CONFIG_CPUSETS=y > CONFIG_SYSFS_DEPRECATED=y > CONFIG_RELAY=y > CONFIG_INITRAMFS_SOURCE="" > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > # CONFIG_TASK_XACCT is not set > CONFIG_SYSCTL=y > CONFIG_EMBEDDED=y > CONFIG_UID16=y > # CONFIG_SYSCTL_SYSCALL is not set > CONFIG_KALLSYMS=y > CONFIG_KALLSYMS_ALL=y > CONFIG_KALLSYMS_EXTRA_PASS=y > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_SLAB=y > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_RT_MUTEXES=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_MODVERSIONS=y > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > CONFIG_STOP_MACHINE=y > > # > # Block layer > # > CONFIG_BLOCK=y > CONFIG_LBD=y > CONFIG_BLK_DEV_IO_TRACE=y > CONFIG_LSF=y > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_DEFAULT_AS is not set > # CONFIG_DEFAULT_DEADLINE is not set > CONFIG_DEFAULT_CFQ=y > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="cfq" > > # > # Processor type and features > # > CONFIG_SMP=y > # CONFIG_X86_PC is not set > # CONFIG_X86_ELAN is not set > # CONFIG_X86_VOYAGER is not set > # CONFIG_X86_NUMAQ is not set > # CONFIG_X86_SUMMIT is not set > # CONFIG_X86_BIGSMP is not set > # CONFIG_X86_VISWS is not set > CONFIG_X86_GENERICARCH=y > # CONFIG_X86_ES7000 is not set > # CONFIG_PARAVIRT is not set > CONFIG_X86_CYCLONE_TIMER=y > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUMM is not set > # CONFIG_MCORE2 is not set > CONFIG_MPENTIUM4=y > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MEFFICEON is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MGEODEGX1 is not set > # CONFIG_MGEODE_LX is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > CONFIG_X86_GENERIC=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_L1_CACHE_SHIFT=7 > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > # CONFIG_ARCH_HAS_ILOG2_U32 is not set > # CONFIG_ARCH_HAS_ILOG2_U64 is not set > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_CMPXCHG64=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_TSC=y > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_NR_CPUS=4 > CONFIG_SCHED_SMT=y > CONFIG_SCHED_MC=y > # CONFIG_PREEMPT_NONE is not set > # CONFIG_PREEMPT_VOLUNTARY is not set > CONFIG_PREEMPT=y > CONFIG_PREEMPT_BKL=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_MCE=y > # CONFIG_X86_MCE_NONFATAL is not set > CONFIG_X86_MCE_P4THERMAL=y > CONFIG_VM86=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > CONFIG_X86_REBOOTFIXUPS=y > CONFIG_MICROCODE=m > CONFIG_MICROCODE_OLD_INTERFACE=y > CONFIG_X86_MSR=m > CONFIG_X86_CPUID=m > > # > # Firmware Drivers > # > CONFIG_EDD=m > CONFIG_DELL_RBU=m > CONFIG_DCDBAS=m > # CONFIG_NOHIGHMEM is not set > # CONFIG_HIGHMEM4G is not set > CONFIG_HIGHMEM64G=y > CONFIG_VMSPLIT_3G=y > # CONFIG_VMSPLIT_3G_OPT is not set > # CONFIG_VMSPLIT_2G is not set > # CONFIG_VMSPLIT_1G is not set > CONFIG_PAGE_OFFSET=0xC0000000 > CONFIG_HIGHMEM=y > CONFIG_X86_PAE=y > # CONFIG_NUMA is not set > CONFIG_ARCH_POPULATES_NODE_MAP=y > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_RESOURCES_64BIT=y > CONFIG_HIGHPTE=y > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > # CONFIG_EFI is not set > CONFIG_IRQBALANCE=y > CONFIG_SECCOMP=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_KEXEC=y > CONFIG_CRASH_DUMP=y > # CONFIG_RELOCATABLE is not set > CONFIG_PHYSICAL_ALIGN=0x100000 > # CONFIG_HOTPLUG_CPU is not set > # CONFIG_COMPAT_VDSO is not set > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > > # > # Power management options (ACPI, APM) > # > CONFIG_PM=y > CONFIG_PM_LEGACY=y > # CONFIG_PM_DEBUG is not set > CONFIG_PM_SYSFS_DEPRECATED=y > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_AC=m > CONFIG_ACPI_BATTERY=m > CONFIG_ACPI_BUTTON=m > CONFIG_ACPI_VIDEO=m > CONFIG_ACPI_HOTKEY=m > CONFIG_ACPI_FAN=y > CONFIG_ACPI_DOCK=m > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_THERMAL=y > CONFIG_ACPI_ASUS=m > CONFIG_ACPI_IBM=m > # CONFIG_ACPI_TOSHIBA is not set > CONFIG_ACPI_BLACKLIST_YEAR=2001 > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_SYSTEM=y > CONFIG_X86_PM_TIMER=y > # CONFIG_ACPI_CONTAINER is not set > CONFIG_ACPI_SBS=m > > # > # APM (Advanced Power Management) BIOS Support > # > CONFIG_APM=y > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > CONFIG_APM_DO_ENABLE=y > CONFIG_APM_CPU_IDLE=y > CONFIG_APM_DISPLAY_BLANK=y > CONFIG_APM_RTC_IS_GMT=y > CONFIG_APM_ALLOW_INTS=y > CONFIG_APM_REAL_MODE_POWER_OFF=y > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > # CONFIG_CPU_FREQ_DEBUG is not set > CONFIG_CPU_FREQ_STAT=y > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=m > # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set > > # > # CPUFreq processor drivers > # > CONFIG_X86_ACPI_CPUFREQ=y > # CONFIG_X86_POWERNOW_K6 is not set > # CONFIG_X86_POWERNOW_K7 is not set > # CONFIG_X86_POWERNOW_K8 is not set > # CONFIG_X86_GX_SUSPMOD is not set > CONFIG_X86_SPEEDSTEP_CENTRINO=y > CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y > CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y > CONFIG_X86_SPEEDSTEP_ICH=y > CONFIG_X86_SPEEDSTEP_SMI=m > CONFIG_X86_P4_CLOCKMOD=m > # CONFIG_X86_CPUFREQ_NFORCE2 is not set > # CONFIG_X86_LONGRUN is not set > # CONFIG_X86_LONGHAUL is not set > > # > # shared options > # > CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y > CONFIG_X86_SPEEDSTEP_LIB=y > CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y > > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GOMMCONFIG is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > CONFIG_PCIEPORTBUS=y > # CONFIG_HOTPLUG_PCI_PCIE is not set > CONFIG_PCIEAER=y > CONFIG_PCI_MSI=y > # CONFIG_PCI_MULTITHREAD_PROBE is not set > # CONFIG_PCI_DEBUG is not set > CONFIG_HT_IRQ=y > CONFIG_ISA_DMA_API=y > CONFIG_ISA=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_SCx200 is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > CONFIG_PCCARD=m > # CONFIG_PCMCIA_DEBUG is not set > CONFIG_PCMCIA=m > CONFIG_PCMCIA_LOAD_CIS=y > CONFIG_PCMCIA_IOCTL=y > CONFIG_CARDBUS=y > > # > # PC-card bridges > # > CONFIG_YENTA=m > CONFIG_YENTA_O2=y > CONFIG_YENTA_RICOH=y > CONFIG_YENTA_TI=y > CONFIG_YENTA_ENE_TUNE=y > CONFIG_YENTA_TOSHIBA=y > CONFIG_PD6729=m > CONFIG_I82092=m > CONFIG_I82365=m > CONFIG_TCIC=m > CONFIG_PCMCIA_PROBE=y > CONFIG_PCCARD_NONSTATIC=m > > # > # PCI Hotplug Support > # > CONFIG_HOTPLUG_PCI=m > CONFIG_HOTPLUG_PCI_FAKE=m > CONFIG_HOTPLUG_PCI_COMPAQ=m > CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y > CONFIG_HOTPLUG_PCI_IBM=m > CONFIG_HOTPLUG_PCI_ACPI=m > CONFIG_HOTPLUG_PCI_ACPI_IBM=m > CONFIG_HOTPLUG_PCI_CPCI=y > CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m > CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m > CONFIG_HOTPLUG_PCI_SHPC=m > CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE=y > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_AOUT is not set > CONFIG_BINFMT_MISC=y > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > # CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > CONFIG_PACKET_MMAP=y > CONFIG_UNIX=y > CONFIG_XFRM=y > CONFIG_XFRM_USER=y > # CONFIG_XFRM_SUB_POLICY is not set > CONFIG_NET_KEY=m > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > CONFIG_IP_ADVANCED_ROUTER=y > CONFIG_ASK_IP_FIB_HASH=y > # CONFIG_IP_FIB_TRIE is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_MULTIPLE_TABLES=y > CONFIG_IP_ROUTE_MULTIPATH=y > CONFIG_IP_ROUTE_MULTIPATH_CACHED=y > CONFIG_IP_ROUTE_MULTIPATH_RR=m > CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m > CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m > CONFIG_IP_ROUTE_MULTIPATH_DRR=m > CONFIG_IP_ROUTE_VERBOSE=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > CONFIG_IP_PNP_RARP=y > CONFIG_NET_IPIP=m > CONFIG_NET_IPGRE=m > CONFIG_NET_IPGRE_BROADCAST=y > CONFIG_IP_MROUTE=y > CONFIG_IP_PIMSM_V1=y > CONFIG_IP_PIMSM_V2=y > CONFIG_ARPD=y > CONFIG_SYN_COOKIES=y > CONFIG_INET_AH=m > CONFIG_INET_ESP=m > CONFIG_INET_IPCOMP=m > CONFIG_INET_XFRM_TUNNEL=m > CONFIG_INET_TUNNEL=m > CONFIG_INET_XFRM_MODE_TRANSPORT=y > CONFIG_INET_XFRM_MODE_TUNNEL=y > CONFIG_INET_XFRM_MODE_BEET=y > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > CONFIG_TCP_CONG_ADVANCED=y > CONFIG_TCP_CONG_BIC=y > CONFIG_TCP_CONG_CUBIC=m > CONFIG_TCP_CONG_WESTWOOD=m > CONFIG_TCP_CONG_HTCP=m > # CONFIG_TCP_CONG_HSTCP is not set > # CONFIG_TCP_CONG_HYBLA is not set > # CONFIG_TCP_CONG_VEGAS is not set > # CONFIG_TCP_CONG_SCALABLE is not set > # CONFIG_TCP_CONG_LP is not set > # CONFIG_TCP_CONG_VENO is not set > CONFIG_DEFAULT_BIC=y > # CONFIG_DEFAULT_CUBIC is not set > # CONFIG_DEFAULT_HTCP is not set > # CONFIG_DEFAULT_VEGAS is not set > # CONFIG_DEFAULT_WESTWOOD is not set > # CONFIG_DEFAULT_RENO is not set > CONFIG_DEFAULT_TCP_CONG="bic" > # CONFIG_TCP_MD5SIG is not set > > # > # IP: Virtual Server Configuration > # > CONFIG_IP_VS=m > # CONFIG_IP_VS_DEBUG is not set > CONFIG_IP_VS_TAB_BITS=12 > > # > # IPVS transport protocol load balancing support > # > CONFIG_IP_VS_PROTO_TCP=y > CONFIG_IP_VS_PROTO_UDP=y > CONFIG_IP_VS_PROTO_ESP=y > CONFIG_IP_VS_PROTO_AH=y > > # > # IPVS scheduler > # > CONFIG_IP_VS_RR=m > CONFIG_IP_VS_WRR=m > CONFIG_IP_VS_LC=m > CONFIG_IP_VS_WLC=m > CONFIG_IP_VS_LBLC=m > CONFIG_IP_VS_LBLCR=m > CONFIG_IP_VS_DH=m > CONFIG_IP_VS_SH=m > CONFIG_IP_VS_SED=m > CONFIG_IP_VS_NQ=m > > # > # IPVS application helper > # > CONFIG_IP_VS_FTP=m > # CONFIG_IPV6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_NETWORK_SECMARK is not set > CONFIG_NETFILTER=y > # CONFIG_NETFILTER_DEBUG is not set > > # > # Core Netfilter Configuration > # > # CONFIG_NETFILTER_NETLINK is not set > # CONFIG_NF_CONNTRACK_ENABLED is not set > # CONFIG_NETFILTER_XTABLES is not set > > # > # IP: Netfilter Configuration > # > CONFIG_IP_NF_QUEUE=m > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > CONFIG_IP_SCTP=m > # CONFIG_SCTP_DBG_MSG is not set > # CONFIG_SCTP_DBG_OBJCNT is not set > # CONFIG_SCTP_HMAC_NONE is not set > # CONFIG_SCTP_HMAC_SHA1 is not set > CONFIG_SCTP_HMAC_MD5=y > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > CONFIG_ATM=m > CONFIG_ATM_CLIP=m > # CONFIG_ATM_CLIP_NO_ICMP is not set > CONFIG_ATM_LANE=m > # CONFIG_ATM_MPOA is not set > CONFIG_ATM_BR2684=m > # CONFIG_ATM_BR2684_IPFILTER is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > CONFIG_LLC=m > # CONFIG_LLC2 is not set > CONFIG_IPX=m > CONFIG_IPX_INTERN=y > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > CONFIG_NET_PKTGEN=m > CONFIG_NET_TCPPROBE=m > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > CONFIG_BT=m > CONFIG_BT_L2CAP=m > CONFIG_BT_SCO=m > CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > CONFIG_BT_HIDP=m > > # > # Bluetooth device drivers > # > CONFIG_BT_HCIUSB=m > CONFIG_BT_HCIUSB_SCO=y > CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > CONFIG_BT_HCIBCM203X=m > # CONFIG_BT_HCIBPA10X is not set > CONFIG_BT_HCIBFUSB=m > # CONFIG_BT_HCIDTL1 is not set > # CONFIG_BT_HCIBT3C is not set > # CONFIG_BT_HCIBLUECARD is not set > # CONFIG_BT_HCIBTUART is not set > CONFIG_BT_HCIVHCI=m > CONFIG_IEEE80211=m > # CONFIG_IEEE80211_DEBUG is not set > CONFIG_IEEE80211_CRYPT_WEP=m > CONFIG_IEEE80211_CRYPT_CCMP=m > # CONFIG_IEEE80211_CRYPT_TKIP is not set > CONFIG_IEEE80211_SOFTMAC=m > # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set > CONFIG_WIRELESS_EXT=y > CONFIG_FIB_RULES=y > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_SYS_HYPERVISOR is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > CONFIG_CONNECTOR=m > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > CONFIG_PARPORT=m > CONFIG_PARPORT_PC=m > CONFIG_PARPORT_SERIAL=m > # CONFIG_PARPORT_PC_FIFO is not set > # CONFIG_PARPORT_PC_SUPERIO is not set > # CONFIG_PARPORT_PC_PCMCIA is not set > # CONFIG_PARPORT_GSC is not set > # CONFIG_PARPORT_AX88796 is not set > CONFIG_PARPORT_1284=y > CONFIG_PARPORT_NOT_PC=y > > # > # Plug and Play support > # > CONFIG_PNP=y > # CONFIG_PNP_DEBUG is not set > > # > # Protocols > # > CONFIG_ISAPNP=y > # CONFIG_PNPBIOS is not set > CONFIG_PNPACPI=y > > # > # Block devices > # > CONFIG_BLK_DEV_FD=m > # CONFIG_BLK_DEV_XD is not set > # CONFIG_PARIDE is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=m > CONFIG_BLK_DEV_CRYPTOLOOP=m > CONFIG_BLK_DEV_NBD=m > # CONFIG_BLK_DEV_SX8 is not set > CONFIG_BLK_DEV_UB=m > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 > CONFIG_BLK_DEV_INITRD=y > CONFIG_CDROM_PKTCDVD=m > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > CONFIG_CDROM_PKTCDVD_WCACHE=y > # CONFIG_ATA_OVER_ETH is not set > > # > # Misc devices > # > # CONFIG_IBM_ASM is not set > # CONFIG_SGI_IOC4 is not set > # CONFIG_TIFM_CORE is not set > # CONFIG_MSI_LAPTOP is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_IDE_MAX_HWIFS=4 > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > CONFIG_BLK_DEV_IDE_SATA=y > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > CONFIG_BLK_DEV_IDECS=m > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=y > CONFIG_BLK_DEV_IDESCSI=m > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > # CONFIG_BLK_DEV_CMD640 is not set > CONFIG_BLK_DEV_IDEPNP=y > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > CONFIG_BLK_DEV_GENERIC=y > # CONFIG_BLK_DEV_OPTI621 is not set > CONFIG_BLK_DEV_RZ1000=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > CONFIG_BLK_DEV_ATIIXP=m > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_CS5535 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_JMICRON is not set > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_IDE_CHIPSETS=y > > # > # Note: most of these also require special kernel boot parameters > # > CONFIG_BLK_DEV_4DRIVES=y > # CONFIG_BLK_DEV_ALI14XX is not set > # CONFIG_BLK_DEV_DTC2278 is not set > # CONFIG_BLK_DEV_HT6560B is not set > # CONFIG_BLK_DEV_QD65XX is not set > # CONFIG_BLK_DEV_UMC8672 is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=m > # CONFIG_SCSI_TGT is not set > CONFIG_SCSI_NETLINK=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=m > CONFIG_CHR_DEV_SCH=m > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > CONFIG_SCSI_CONSTANTS=y > CONFIG_SCSI_LOGGING=y > # CONFIG_SCSI_SCAN_ASYNC is not set > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=m > CONFIG_SCSI_FC_ATTRS=m > CONFIG_SCSI_ISCSI_ATTRS=m > # CONFIG_SCSI_SAS_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > > # > # SCSI low-level drivers > # > # CONFIG_ISCSI_TCP is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_STEX is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_SRP is not set > > # > # PCMCIA SCSI adapter support > # > CONFIG_PCMCIA_AHA152X=m > CONFIG_PCMCIA_FDOMAIN=m > # CONFIG_PCMCIA_NINJA_SCSI is not set > # CONFIG_PCMCIA_QLOGIC is not set > CONFIG_PCMCIA_SYM53C500=m > > # > # Serial ATA (prod) and Parallel ATA (experimental) drivers > # > CONFIG_ATA=m > CONFIG_SATA_AHCI=m > # CONFIG_SATA_SVW is not set > CONFIG_ATA_PIIX=m > # CONFIG_SATA_MV is not set > # CONFIG_SATA_NV is not set > # CONFIG_PDC_ADMA is not set > # CONFIG_SATA_QSTOR is not set > # CONFIG_SATA_PROMISE is not set > # CONFIG_SATA_SX4 is not set > # CONFIG_SATA_SIL is not set > # CONFIG_SATA_SIL24 is not set > # CONFIG_SATA_SIS is not set > # CONFIG_SATA_ULI is not set > # CONFIG_SATA_VIA is not set > # CONFIG_SATA_VITESSE is not set > # CONFIG_PATA_ALI is not set > # CONFIG_PATA_AMD is not set > # CONFIG_PATA_ARTOP is not set > # CONFIG_PATA_ATIIXP is not set > # CONFIG_PATA_CMD64X is not set > # CONFIG_PATA_CS5520 is not set > # CONFIG_PATA_CS5530 is not set > # CONFIG_PATA_CS5535 is not set > # CONFIG_PATA_CYPRESS is not set > # CONFIG_PATA_EFAR is not set > # CONFIG_ATA_GENERIC is not set > # CONFIG_PATA_HPT366 is not set > # CONFIG_PATA_HPT37X is not set > # CONFIG_PATA_HPT3X2N is not set > # CONFIG_PATA_HPT3X3 is not set > # CONFIG_PATA_ISAPNP is not set > # CONFIG_PATA_IT821X is not set > # CONFIG_PATA_JMICRON is not set > # CONFIG_PATA_LEGACY is not set > # CONFIG_PATA_TRIFLEX is not set > # CONFIG_PATA_MARVELL is not set > # CONFIG_PATA_MPIIX is not set > # CONFIG_PATA_OLDPIIX is not set > # CONFIG_PATA_NETCELL is not set > # CONFIG_PATA_NS87410 is not set > # CONFIG_PATA_OPTI is not set > # CONFIG_PATA_OPTIDMA is not set > # CONFIG_PATA_PCMCIA is not set > # CONFIG_PATA_PDC_OLD is not set > # CONFIG_PATA_QDI is not set > # CONFIG_PATA_RADISYS is not set > # CONFIG_PATA_RZ1000 is not set > # CONFIG_PATA_SC1200 is not set > # CONFIG_PATA_SERVERWORKS is not set > # CONFIG_PATA_PDC2027X is not set > # CONFIG_PATA_SIL680 is not set > # CONFIG_PATA_SIS is not set > # CONFIG_PATA_VIA is not set > # CONFIG_PATA_WINBOND is not set > # CONFIG_PATA_WINBOND_VLB is not set > # CONFIG_PATA_PLATFORM is not set > > # > # Old CD-ROM drivers (not SCSI, not IDE) > # > # CONFIG_CD_NO_IDESCSI is not set > > # > # Multi-device support (RAID and LVM) > # > CONFIG_MD=y > CONFIG_BLK_DEV_MD=y > CONFIG_MD_LINEAR=m > CONFIG_MD_RAID0=m > CONFIG_MD_RAID1=m > CONFIG_MD_RAID10=m > # CONFIG_MD_RAID456 is not set > CONFIG_MD_MULTIPATH=m > # CONFIG_MD_FAULTY is not set > CONFIG_BLK_DEV_DM=m > # CONFIG_DM_DEBUG is not set > CONFIG_DM_CRYPT=m > CONFIG_DM_SNAPSHOT=m > CONFIG_DM_MIRROR=m > CONFIG_DM_ZERO=m > CONFIG_DM_MULTIPATH=m > CONFIG_DM_MULTIPATH_EMC=m > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > # CONFIG_FUSION_SAS is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > CONFIG_I2O=m > CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y > CONFIG_I2O_EXT_ADAPTEC=y > CONFIG_I2O_EXT_ADAPTEC_DMA64=y > CONFIG_I2O_CONFIG=m > CONFIG_I2O_CONFIG_OLD_IOCTL=y > # CONFIG_I2O_BUS is not set > CONFIG_I2O_BLOCK=m > CONFIG_I2O_SCSI=m > CONFIG_I2O_PROC=m > > # > # Network device support > # > CONFIG_NETDEVICES=y > CONFIG_DUMMY=m > CONFIG_BONDING=m > CONFIG_EQUALIZER=m > CONFIG_TUN=m > CONFIG_NET_SB1000=m > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # PHY device support > # > > # > # Ethernet (10 or 100Mbit) > # > # CONFIG_NET_ETHERNET is not set > CONFIG_MII=m > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > CONFIG_E1000=m > # CONFIG_E1000_NAPI is not set > # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SKY2 is not set > # CONFIG_SK98LIN is not set > CONFIG_TIGON3=m > CONFIG_BNX2=m > # CONFIG_QLA3XXX is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > # CONFIG_MYRI10GE is not set > # CONFIG_NETXEN_NIC is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > CONFIG_NET_RADIO=y > # CONFIG_NET_WIRELESS_RTNETLINK is not set > > # > # Obsolete Wireless cards support (pre-802.11) > # > # CONFIG_STRIP is not set > # CONFIG_ARLAN is not set > # CONFIG_WAVELAN is not set > # CONFIG_PCMCIA_WAVELAN is not set > # CONFIG_PCMCIA_NETWAVE is not set > > # > # Wireless 802.11 Frequency Hopping cards support > # > # CONFIG_PCMCIA_RAYCS is not set > > # > # Wireless 802.11b ISA/PCI cards support > # > # CONFIG_IPW2100 is not set > # CONFIG_IPW2200 is not set > # CONFIG_AIRO is not set > # CONFIG_HERMES is not set > # CONFIG_ATMEL is not set > > # > # Wireless 802.11b Pcmcia/Cardbus cards support > # > # CONFIG_AIRO_CS is not set > # CONFIG_PCMCIA_WL3501 is not set > > # > # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support > # > # CONFIG_PRISM54 is not set > # CONFIG_USB_ZD1201 is not set > # CONFIG_HOSTAP is not set > # CONFIG_BCM43XX is not set > # CONFIG_ZD1211RW is not set > CONFIG_NET_WIRELESS=y > > # > # PCMCIA network device support > # > CONFIG_NET_PCMCIA=y > # CONFIG_PCMCIA_3C589 is not set > # CONFIG_PCMCIA_3C574 is not set > # CONFIG_PCMCIA_FMVJ18X is not set > # CONFIG_PCMCIA_PCNET is not set > # CONFIG_PCMCIA_NMCLAN is not set > # CONFIG_PCMCIA_SMC91C92 is not set > # CONFIG_PCMCIA_XIRC2PS is not set > # CONFIG_PCMCIA_AXNET is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # ATM drivers > # > # CONFIG_ATM_DUMMY is not set > CONFIG_ATM_TCP=m > # CONFIG_ATM_LANAI is not set > # CONFIG_ATM_ENI is not set > # CONFIG_ATM_FIRESTREAM is not set > # CONFIG_ATM_ZATM is not set > # CONFIG_ATM_NICSTAR is not set > # CONFIG_ATM_IDT77252 is not set > # CONFIG_ATM_AMBASSADOR is not set > # CONFIG_ATM_HORIZON is not set > # CONFIG_ATM_IA is not set > # CONFIG_ATM_FORE200E_MAYBE is not set > # CONFIG_ATM_HE is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PLIP is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > CONFIG_NETCONSOLE=m > CONFIG_NETPOLL=y > CONFIG_NETPOLL_RX=y > CONFIG_NETPOLL_TRAP=y > CONFIG_NET_POLL_CONTROLLER=y > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > CONFIG_INPUT_FF_MEMLESS=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > # CONFIG_KEYBOARD_STOWAWAY is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > CONFIG_MOUSE_SERIAL=m > CONFIG_MOUSE_INPORT=m > CONFIG_MOUSE_ATIXL=y > CONFIG_MOUSE_LOGIBM=m > CONFIG_MOUSE_PC110PAD=m > CONFIG_MOUSE_VSXXXAA=m > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > CONFIG_INPUT_MISC=y > CONFIG_INPUT_PCSPKR=m > # CONFIG_INPUT_WISTRON_BTNS is not set > CONFIG_INPUT_UINPUT=m > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=y > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PARKBD is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_VT_HW_CONSOLE_BINDING is not set > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_PCI=y > CONFIG_SERIAL_8250_PNP=y > # CONFIG_SERIAL_8250_CS is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > # CONFIG_SERIAL_8250_MANY_PORTS is not set > CONFIG_SERIAL_8250_SHARE_IRQ=y > CONFIG_SERIAL_8250_DETECT_IRQ=y > CONFIG_SERIAL_8250_RSA=y > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > # CONFIG_LEGACY_PTYS is not set > CONFIG_PRINTER=m > CONFIG_LP_CONSOLE=y > CONFIG_PPDEV=m > # CONFIG_TIPAR is not set > > # > # IPMI > # > CONFIG_IPMI_HANDLER=m > # CONFIG_IPMI_PANIC_EVENT is not set > CONFIG_IPMI_DEVICE_INTERFACE=m > CONFIG_IPMI_SI=m > CONFIG_IPMI_WATCHDOG=m > CONFIG_IPMI_POWEROFF=m > > # > # Watchdog Cards > # > CONFIG_WATCHDOG=y > # CONFIG_WATCHDOG_NOWAYOUT is not set > > # > # Watchdog Device Drivers > # > CONFIG_SOFT_WATCHDOG=m > # CONFIG_ACQUIRE_WDT is not set > # CONFIG_ADVANTECH_WDT is not set > # CONFIG_ALIM1535_WDT is not set > # CONFIG_ALIM7101_WDT is not set > # CONFIG_SC520_WDT is not set > # CONFIG_EUROTECH_WDT is not set > # CONFIG_IB700_WDT is not set > # CONFIG_IBMASR is not set > # CONFIG_WAFER_WDT is not set > # CONFIG_I6300ESB_WDT is not set > # CONFIG_I8XX_TCO is not set > # CONFIG_ITCO_WDT is not set > # CONFIG_SC1200_WDT is not set > # CONFIG_PC87413_WDT is not set > # CONFIG_60XX_WDT is not set > # CONFIG_SBC8360_WDT is not set > # CONFIG_CPU5_WDT is not set > # CONFIG_SMSC37B787_WDT is not set > # CONFIG_W83627HF_WDT is not set > # CONFIG_W83697HF_WDT is not set > # CONFIG_W83877F_WDT is not set > # CONFIG_W83977F_WDT is not set > # CONFIG_MACHZ_WDT is not set > # CONFIG_SBC_EPX_C3_WATCHDOG is not set > > # > # ISA-based Watchdog Cards > # > # CONFIG_PCWATCHDOG is not set > # CONFIG_MIXCOMWD is not set > # CONFIG_WDT is not set > > # > # PCI-based Watchdog Cards > # > # CONFIG_PCIPCWATCHDOG is not set > # CONFIG_WDTPCI is not set > > # > # USB-based Watchdog Cards > # > # CONFIG_USBPCWATCHDOG is not set > CONFIG_HW_RANDOM=y > CONFIG_HW_RANDOM_INTEL=y > # CONFIG_HW_RANDOM_AMD is not set > # CONFIG_HW_RANDOM_GEODE is not set > # CONFIG_HW_RANDOM_VIA is not set > CONFIG_NVRAM=m > CONFIG_RTC=y > CONFIG_DTLK=m > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > CONFIG_AGP=y > # CONFIG_AGP_ALI is not set > CONFIG_AGP_ATI=m > # CONFIG_AGP_AMD is not set > # CONFIG_AGP_AMD64 is not set > CONFIG_AGP_INTEL=m > # CONFIG_AGP_NVIDIA is not set > # CONFIG_AGP_SIS is not set > # CONFIG_AGP_SWORKS is not set > # CONFIG_AGP_VIA is not set > # CONFIG_AGP_EFFICEON is not set > CONFIG_DRM=y > # CONFIG_DRM_TDFX is not set > CONFIG_DRM_R128=m > CONFIG_DRM_RADEON=m > CONFIG_DRM_I810=m > CONFIG_DRM_I830=m > CONFIG_DRM_I915=m > # CONFIG_DRM_MGA is not set > # CONFIG_DRM_SIS is not set > # CONFIG_DRM_VIA is not set > # CONFIG_DRM_SAVAGE is not set > > # > # PCMCIA character devices > # > # CONFIG_SYNCLINK_CS is not set > # CONFIG_CARDMAN_4000 is not set > # CONFIG_CARDMAN_4040 is not set > # CONFIG_MWAVE is not set > # CONFIG_PC8736x_GPIO is not set > # CONFIG_NSC_GPIO is not set > # CONFIG_CS5535_GPIO is not set > CONFIG_RAW_DRIVER=y > CONFIG_MAX_RAW_DEVS=8192 > CONFIG_HPET=y > # CONFIG_HPET_RTC_IRQ is not set > CONFIG_HPET_MMAP=y > CONFIG_HANGCHECK_TIMER=m > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > CONFIG_I2C=m > CONFIG_I2C_CHARDEV=m > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=m > CONFIG_I2C_ALGOPCF=m > CONFIG_I2C_ALGOPCA=m > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > CONFIG_I2C_I801=m > CONFIG_I2C_I810=m > CONFIG_I2C_PIIX4=m > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_OCORES is not set > # CONFIG_I2C_PARPORT is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_SCx200_ACB is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > # CONFIG_I2C_PCA_ISA is not set > > # > # Miscellaneous I2C Chip support > # > # CONFIG_SENSORS_DS1337 is not set > # CONFIG_SENSORS_DS1374 is not set > CONFIG_SENSORS_EEPROM=m > # CONFIG_SENSORS_PCF8574 is not set > # CONFIG_SENSORS_PCA9539 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_SENSORS_MAX6875 is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=m > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_ABITUGURU is not set > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ADM9240 is not set > # CONFIG_SENSORS_K8TEMP is not set > # CONFIG_SENSORS_ASB100 is not set > # CONFIG_SENSORS_ATXP1 is not set > # CONFIG_SENSORS_DS1621 is not set > # CONFIG_SENSORS_F71805F is not set > # CONFIG_SENSORS_FSCHER is not set > # CONFIG_SENSORS_FSCPOS is not set > # CONFIG_SENSORS_GL518SM is not set > # CONFIG_SENSORS_GL520SM is not set > # CONFIG_SENSORS_IT87 is not set > # CONFIG_SENSORS_LM63 is not set > # CONFIG_SENSORS_LM75 is not set > # CONFIG_SENSORS_LM77 is not set > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM80 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM87 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_LM92 is not set > # CONFIG_SENSORS_MAX1619 is not set > # CONFIG_SENSORS_PC87360 is not set > # CONFIG_SENSORS_PC87427 is not set > # CONFIG_SENSORS_SIS5595 is not set > # CONFIG_SENSORS_SMSC47M1 is not set > # CONFIG_SENSORS_SMSC47M192 is not set > # CONFIG_SENSORS_SMSC47B397 is not set > # CONFIG_SENSORS_VIA686A is not set > # CONFIG_SENSORS_VT1211 is not set > # CONFIG_SENSORS_VT8231 is not set > # CONFIG_SENSORS_W83781D is not set > # CONFIG_SENSORS_W83791D is not set > # CONFIG_SENSORS_W83792D is not set > # CONFIG_SENSORS_W83793 is not set > # CONFIG_SENSORS_W83L785TS is not set > # CONFIG_SENSORS_W83627HF is not set > # CONFIG_SENSORS_W83627EHF is not set > CONFIG_SENSORS_HDAPS=m > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Multimedia devices > # > CONFIG_VIDEO_DEV=m > CONFIG_VIDEO_V4L1=y > CONFIG_VIDEO_V4L1_COMPAT=y > CONFIG_VIDEO_V4L2=y > > # > # Video Capture Adapters > # > > # > # Video Capture Adapters > # > # CONFIG_VIDEO_ADV_DEBUG is not set > CONFIG_VIDEO_HELPER_CHIPS_AUTO=y > # CONFIG_VIDEO_VIVI is not set > # CONFIG_VIDEO_BT848 is not set > # CONFIG_VIDEO_PMS is not set > # CONFIG_VIDEO_BWQCAM is not set > # CONFIG_VIDEO_CQCAM is not set > # CONFIG_VIDEO_W9966 is not set > # CONFIG_VIDEO_CPIA is not set > # CONFIG_VIDEO_CPIA2 is not set > # CONFIG_VIDEO_SAA5246A is not set > # CONFIG_VIDEO_SAA5249 is not set > # CONFIG_TUNER_3036 is not set > # CONFIG_VIDEO_STRADIS is not set > # CONFIG_VIDEO_ZORAN is not set > # CONFIG_VIDEO_SAA7134 is not set > # CONFIG_VIDEO_MXB is not set > # CONFIG_VIDEO_DPC is not set > # CONFIG_VIDEO_HEXIUM_ORION is not set > # CONFIG_VIDEO_HEXIUM_GEMINI is not set > # CONFIG_VIDEO_CX88 is not set > # CONFIG_VIDEO_CAFE_CCIC is not set > > # > # V4L USB devices > # > # CONFIG_VIDEO_PVRUSB2 is not set > # CONFIG_VIDEO_EM28XX is not set > # CONFIG_VIDEO_USBVISION is not set > # CONFIG_USB_VICAM is not set > # CONFIG_USB_IBMCAM is not set > # CONFIG_USB_KONICAWC is not set > # CONFIG_USB_QUICKCAM_MESSENGER is not set > # CONFIG_USB_ET61X251 is not set > # CONFIG_VIDEO_OVCAMCHIP is not set > # CONFIG_USB_W9968CF is not set > # CONFIG_USB_OV511 is not set > # CONFIG_USB_SE401 is not set > # CONFIG_USB_SN9C102 is not set > # CONFIG_USB_STV680 is not set > # CONFIG_USB_ZC0301 is not set > # CONFIG_USB_PWC is not set > > # > # Radio Adapters > # > # CONFIG_RADIO_CADET is not set > # CONFIG_RADIO_RTRACK is not set > # CONFIG_RADIO_RTRACK2 is not set > # CONFIG_RADIO_AZTECH is not set > # CONFIG_RADIO_GEMTEK is not set > # CONFIG_RADIO_GEMTEK_PCI is not set > # CONFIG_RADIO_MAXIRADIO is not set > # CONFIG_RADIO_MAESTRO is not set > # CONFIG_RADIO_SF16FMI is not set > # CONFIG_RADIO_SF16FMR2 is not set > # CONFIG_RADIO_TERRATEC is not set > # CONFIG_RADIO_TRUST is not set > # CONFIG_RADIO_TYPHOON is not set > # CONFIG_RADIO_ZOLTRIX is not set > # CONFIG_USB_DSBR is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > # CONFIG_USB_DABUSB is not set > > # > # Graphics support > # > CONFIG_FIRMWARE_EDID=y > CONFIG_FB=y > CONFIG_FB_DDC=m > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > # CONFIG_FB_MACMODES is not set > # CONFIG_FB_BACKLIGHT is not set > CONFIG_FB_MODE_HELPERS=y > # CONFIG_FB_TILEBLITTING is not set > CONFIG_FB_CIRRUS=m > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_ARC is not set > # CONFIG_FB_ASILIANT is not set > # CONFIG_FB_IMSTT is not set > CONFIG_FB_VGA16=m > CONFIG_FB_VESA=y > # CONFIG_FB_HGA is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_NVIDIA is not set > # CONFIG_FB_RIVA is not set > CONFIG_FB_I810=m > CONFIG_FB_I810_GTF=y > CONFIG_FB_I810_I2C=y > # CONFIG_FB_INTEL is not set > # CONFIG_FB_MATROX is not set > CONFIG_FB_RADEON=m > CONFIG_FB_RADEON_I2C=y > # CONFIG_FB_RADEON_DEBUG is not set > CONFIG_FB_ATY128=m > CONFIG_FB_ATY=m > CONFIG_FB_ATY_CT=y > CONFIG_FB_ATY_GENERIC_LCD=y > # CONFIG_FB_ATY_GX is not set > # CONFIG_FB_SAVAGE is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_CYBLA is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_GEODE is not set > CONFIG_FB_VIRTUAL=m > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_VGACON_SOFT_SCROLLBACK=y > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 > CONFIG_VIDEO_SELECT=y > CONFIG_MDA_CONSOLE=m > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > CONFIG_LOGO=y > # CONFIG_LOGO_LINUX_MONO is not set > # CONFIG_LOGO_LINUX_VGA16 is not set > CONFIG_LOGO_LINUX_CLUT224=y > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_BACKLIGHT_CLASS_DEVICE=m > CONFIG_BACKLIGHT_DEVICE=y > CONFIG_LCD_CLASS_DEVICE=m > CONFIG_LCD_DEVICE=y > > # > # Sound > # > CONFIG_SOUND=m > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=m > CONFIG_SND_TIMER=m > CONFIG_SND_PCM=m > CONFIG_SND_HWDEP=m > CONFIG_SND_RAWMIDI=m > CONFIG_SND_SEQUENCER=m > CONFIG_SND_SEQ_DUMMY=m > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=m > CONFIG_SND_PCM_OSS=m > CONFIG_SND_PCM_OSS_PLUGINS=y > CONFIG_SND_SEQUENCER_OSS=y > CONFIG_SND_RTCTIMER=m > CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y > CONFIG_SND_DYNAMIC_MINORS=y > CONFIG_SND_SUPPORT_OLD_API=y > CONFIG_SND_VERBOSE_PROCFS=y > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > CONFIG_SND_MPU401_UART=m > CONFIG_SND_OPL3_LIB=m > CONFIG_SND_AC97_CODEC=m > CONFIG_SND_DUMMY=m > CONFIG_SND_VIRMIDI=m > CONFIG_SND_MTPAV=m > # CONFIG_SND_MTS64 is not set > CONFIG_SND_SERIAL_U16550=m > CONFIG_SND_MPU401=m > > # > # ISA devices > # > CONFIG_SND_AD1848_LIB=m > # CONFIG_SND_ADLIB is not set > CONFIG_SND_AD1816A=m > CONFIG_SND_AD1848=m > CONFIG_SND_ALS100=m > # CONFIG_SND_AZT2320 is not set > # CONFIG_SND_CMI8330 is not set > # CONFIG_SND_CS4231 is not set > # CONFIG_SND_CS4232 is not set > # CONFIG_SND_CS4236 is not set > # CONFIG_SND_DT019X is not set > # CONFIG_SND_ES968 is not set > # CONFIG_SND_ES1688 is not set > # CONFIG_SND_ES18XX is not set > # CONFIG_SND_GUSCLASSIC is not set > # CONFIG_SND_GUSEXTREME is not set > # CONFIG_SND_GUSMAX is not set > # CONFIG_SND_INTERWAVE is not set > # CONFIG_SND_INTERWAVE_STB is not set > # CONFIG_SND_OPL3SA2 is not set > # CONFIG_SND_OPTI92X_AD1848 is not set > # CONFIG_SND_OPTI92X_CS4231 is not set > # CONFIG_SND_OPTI93X is not set > # CONFIG_SND_MIRO is not set > # CONFIG_SND_SB8 is not set > # CONFIG_SND_SB16 is not set > # CONFIG_SND_SBAWE is not set > # CONFIG_SND_SGALAXY is not set > # CONFIG_SND_SSCAPE is not set > # CONFIG_SND_WAVEFRONT is not set > > # > # PCI devices > # > CONFIG_SND_AD1889=m > CONFIG_SND_ALS300=m > CONFIG_SND_ALS4000=m > # CONFIG_SND_ALI5451 is not set > CONFIG_SND_ATIIXP=m > CONFIG_SND_ATIIXP_MODEM=m > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS5535AUDIO is not set > # CONFIG_SND_DARLA20 is not set > # CONFIG_SND_GINA20 is not set > # CONFIG_SND_LAYLA20 is not set > # CONFIG_SND_DARLA24 is not set > # CONFIG_SND_GINA24 is not set > # CONFIG_SND_LAYLA24 is not set > # CONFIG_SND_MONA is not set > # CONFIG_SND_MIA is not set > # CONFIG_SND_ECHO3G is not set > # CONFIG_SND_INDIGO is not set > # CONFIG_SND_INDIGOIO is not set > # CONFIG_SND_INDIGODJ is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_FM801 is not set > CONFIG_SND_HDA_INTEL=m > # CONFIG_SND_HDSP is not set > # CONFIG_SND_HDSPM is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > CONFIG_SND_INTEL8X0=m > CONFIG_SND_INTEL8X0M=m > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_PCXHR is not set > # CONFIG_SND_RIPTIDE is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_AC97_POWER_SAVE is not set > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # PCMCIA devices > # > # CONFIG_SND_VXPOCKET is not set > # CONFIG_SND_PDAUDIOCF is not set > > # > # Open Sound System > # > CONFIG_SOUND_PRIME=m > # CONFIG_SOUND_BT878 is not set > # CONFIG_SOUND_ES1371 is not set > CONFIG_SOUND_ICH=m > # CONFIG_SOUND_TRIDENT is not set > # CONFIG_SOUND_MSNDCLAS is not set > # CONFIG_SOUND_MSNDPIN is not set > # CONFIG_SOUND_VIA82CXXX is not set > CONFIG_SOUND_OSS=m > # CONFIG_SOUND_TRACEINIT is not set > # CONFIG_SOUND_DMAP is not set > # CONFIG_SOUND_CS4232 is not set > # CONFIG_SOUND_SSCAPE is not set > # CONFIG_SOUND_VMIDI is not set > # CONFIG_SOUND_TRIX is not set > # CONFIG_SOUND_MSS is not set > # CONFIG_SOUND_MPU401 is not set > # CONFIG_SOUND_PAS is not set > # CONFIG_SOUND_PSS is not set > # CONFIG_SOUND_SB is not set > # CONFIG_SOUND_YM3812 is not set > # CONFIG_SOUND_UART6850 is not set > # CONFIG_SOUND_AEDSP16 is not set > # CONFIG_SOUND_TVMIXER is not set > CONFIG_AC97_BUS=m > > # > # HID Devices > # > CONFIG_HID=y > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > CONFIG_USB_SUSPEND=y > # CONFIG_USB_MULTITHREAD_PROBE is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=m > CONFIG_USB_EHCI_SPLIT_ISO=y > CONFIG_USB_EHCI_ROOT_HUB_TT=y > # CONFIG_USB_EHCI_TT_NEWSCHED is not set > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=m > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=m > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > CONFIG_USB_ACM=m > CONFIG_USB_PRINTER=m > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # may also be needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > CONFIG_USB_STORAGE_DATAFAB=y > CONFIG_USB_STORAGE_FREECOM=y > CONFIG_USB_STORAGE_ISD200=y > CONFIG_USB_STORAGE_DPCM=y > # CONFIG_USB_STORAGE_USBAT is not set > CONFIG_USB_STORAGE_SDDR09=y > CONFIG_USB_STORAGE_SDDR55=y > CONFIG_USB_STORAGE_JUMPSHOT=y > # CONFIG_USB_STORAGE_ALAUDA is not set > # CONFIG_USB_STORAGE_KARMA is not set > # CONFIG_USB_LIBUSUAL is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=y > # CONFIG_USB_HID_POWERBOOK is not set > CONFIG_HID_FF=y > CONFIG_HID_PID=y > CONFIG_LOGITECH_FF=y > CONFIG_THRUSTMASTER_FF=y > # CONFIG_ZEROPLUS_FF is not set > CONFIG_USB_HIDDEV=y > CONFIG_USB_AIPTEK=m > CONFIG_USB_WACOM=m > # CONFIG_USB_ACECAD is not set > CONFIG_USB_KBTAB=m > CONFIG_USB_POWERMATE=m > # CONFIG_USB_TOUCHSCREEN is not set > # CONFIG_USB_YEALINK is not set > CONFIG_USB_XPAD=m > CONFIG_USB_ATI_REMOTE=m > # CONFIG_USB_ATI_REMOTE2 is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > CONFIG_USB_MDC800=m > CONFIG_USB_MICROTEK=m > > # > # USB Network Adapters > # > CONFIG_USB_CATC=m > CONFIG_USB_KAWETH=m > CONFIG_USB_PEGASUS=m > CONFIG_USB_RTL8150=m > # CONFIG_USB_USBNET_MII is not set > CONFIG_USB_USBNET=m > CONFIG_USB_NET_CDCETHER=m > # CONFIG_USB_NET_GL620A is not set > CONFIG_USB_NET_NET1080=m > # CONFIG_USB_NET_PLUSB is not set > # CONFIG_USB_NET_MCS7830 is not set > # CONFIG_USB_NET_RNDIS_HOST is not set > # CONFIG_USB_NET_CDC_SUBSET is not set > CONFIG_USB_NET_ZAURUS=m > CONFIG_USB_MON=y > > # > # USB port drivers > # > CONFIG_USB_USS720=m > > # > # USB Serial Converter support > # > CONFIG_USB_SERIAL=m > CONFIG_USB_SERIAL_GENERIC=y > # CONFIG_USB_SERIAL_AIRCABLE is not set > # CONFIG_USB_SERIAL_AIRPRIME is not set > # CONFIG_USB_SERIAL_ARK3116 is not set > CONFIG_USB_SERIAL_BELKIN=m > # CONFIG_USB_SERIAL_WHITEHEAT is not set > CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m > # CONFIG_USB_SERIAL_CP2101 is not set > # CONFIG_USB_SERIAL_CYPRESS_M8 is not set > CONFIG_USB_SERIAL_EMPEG=m > CONFIG_USB_SERIAL_FTDI_SIO=m > # CONFIG_USB_SERIAL_FUNSOFT is not set > CONFIG_USB_SERIAL_VISOR=m > CONFIG_USB_SERIAL_IPAQ=m > CONFIG_USB_SERIAL_IR=m > CONFIG_USB_SERIAL_EDGEPORT=m > CONFIG_USB_SERIAL_EDGEPORT_TI=m > # CONFIG_USB_SERIAL_GARMIN is not set > # CONFIG_USB_SERIAL_IPW is not set > CONFIG_USB_SERIAL_KEYSPAN_PDA=m > CONFIG_USB_SERIAL_KEYSPAN=m > CONFIG_USB_SERIAL_KEYSPAN_MPR=y > CONFIG_USB_SERIAL_KEYSPAN_USA28=y > CONFIG_USB_SERIAL_KEYSPAN_USA28X=y > CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y > CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y > CONFIG_USB_SERIAL_KEYSPAN_USA19=y > CONFIG_USB_SERIAL_KEYSPAN_USA18X=y > CONFIG_USB_SERIAL_KEYSPAN_USA19W=y > CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y > CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y > CONFIG_USB_SERIAL_KEYSPAN_USA49W=y > CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y > CONFIG_USB_SERIAL_KLSI=m > CONFIG_USB_SERIAL_KOBIL_SCT=m > CONFIG_USB_SERIAL_MCT_U232=m > # CONFIG_USB_SERIAL_MOS7720 is not set > # CONFIG_USB_SERIAL_MOS7840 is not set > # CONFIG_USB_SERIAL_NAVMAN is not set > CONFIG_USB_SERIAL_PL2303=m > # CONFIG_USB_SERIAL_HP4X is not set > CONFIG_USB_SERIAL_SAFE=m > CONFIG_USB_SERIAL_SAFE_PADDED=y > # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set > # CONFIG_USB_SERIAL_TI is not set > CONFIG_USB_SERIAL_CYBERJACK=m > CONFIG_USB_SERIAL_XIRCOM=m > # CONFIG_USB_SERIAL_OPTION is not set > CONFIG_USB_SERIAL_OMNINET=m > # CONFIG_USB_SERIAL_DEBUG is not set > CONFIG_USB_EZUSB=y > > # > # USB Miscellaneous drivers > # > CONFIG_USB_EMI62=m > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_ADUTUX is not set > CONFIG_USB_AUERSWALD=m > CONFIG_USB_RIO500=m > CONFIG_USB_LEGOTOWER=m > CONFIG_USB_LCD=m > CONFIG_USB_LED=m > # CONFIG_USB_CYPRESS_CY7C63 is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGET is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_FTDI_ELAN is not set > # CONFIG_USB_APPLEDISPLAY is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > CONFIG_USB_TEST=m > > # > # USB DSL modem support > # > CONFIG_USB_ATM=m > CONFIG_USB_SPEEDTOUCH=m > # CONFIG_USB_CXACRU is not set > # CONFIG_USB_UEAGLEATM is not set > # CONFIG_USB_XUSBATM is not set > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # LED devices > # > CONFIG_NEW_LEDS=y > # CONFIG_LEDS_CLASS is not set > > # > # LED drivers > # > > # > # LED Triggers > # > CONFIG_LEDS_TRIGGERS=y > CONFIG_LEDS_TRIGGER_TIMER=m > CONFIG_LEDS_TRIGGER_IDE_DISK=y > CONFIG_LEDS_TRIGGER_HEARTBEAT=m > > # > # InfiniBand support > # > CONFIG_INFINIBAND=m > CONFIG_INFINIBAND_USER_MAD=m > CONFIG_INFINIBAND_USER_ACCESS=m > CONFIG_INFINIBAND_ADDR_TRANS=y > CONFIG_INFINIBAND_MTHCA=m > # CONFIG_INFINIBAND_MTHCA_DEBUG is not set > # CONFIG_INFINIBAND_AMSO1100 is not set > CONFIG_INFINIBAND_IPOIB=m > CONFIG_INFINIBAND_IPOIB_DEBUG=y > # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set > CONFIG_INFINIBAND_SRP=m > CONFIG_INFINIBAND_ISER=m > > # > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) > # > CONFIG_EDAC=m > > # > # Reporting subsystems > # > # CONFIG_EDAC_DEBUG is not set > CONFIG_EDAC_MM_EDAC=m > # CONFIG_EDAC_AMD76X is not set > CONFIG_EDAC_E7XXX=m > CONFIG_EDAC_E752X=m > CONFIG_EDAC_I82875P=m > CONFIG_EDAC_I82860=m > # CONFIG_EDAC_R82600 is not set > CONFIG_EDAC_POLL=y > > # > # Real Time Clock > # > CONFIG_RTC_LIB=m > CONFIG_RTC_CLASS=m > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=m > CONFIG_RTC_INTF_PROC=m > CONFIG_RTC_INTF_DEV=m > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > > # > # RTC drivers > # > # CONFIG_RTC_DRV_X1205 is not set > # CONFIG_RTC_DRV_DS1307 is not set > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_ISL1208 is not set > # CONFIG_RTC_DRV_DS1672 is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_PCF8563 is not set > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_RS5C372 is not set > # CONFIG_RTC_DRV_M48T86 is not set > # CONFIG_RTC_DRV_TEST is not set > # CONFIG_RTC_DRV_V3020 is not set > > # > # DMA Engine support > # > CONFIG_DMA_ENGINE=y > > # > # DMA Clients > # > CONFIG_NET_DMA=y > > # > # DMA Devices > # > CONFIG_INTEL_IOATDMA=m > > # > # Virtualization > # > # CONFIG_KVM is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > CONFIG_EXT2_FS_XATTR=y > CONFIG_EXT2_FS_POSIX_ACL=y > CONFIG_EXT2_FS_SECURITY=y > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=m > CONFIG_EXT3_FS_XATTR=y > CONFIG_EXT3_FS_POSIX_ACL=y > CONFIG_EXT3_FS_SECURITY=y > # CONFIG_EXT4DEV_FS is not set > CONFIG_JBD=m > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > CONFIG_ROMFS_FS=m > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > CONFIG_QUOTA=y > # CONFIG_QFMT_V1 is not set > CONFIG_QFMT_V2=y > CONFIG_QUOTACTL=y > CONFIG_DNOTIFY=y > CONFIG_AUTOFS_FS=m > CONFIG_AUTOFS4_FS=m > CONFIG_FUSE_FS=m > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > CONFIG_ZISOFS_FS=y > CONFIG_UDF_FS=m > CONFIG_UDF_NLS=y > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > CONFIG_VFAT_FS=m > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="ascii" > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > CONFIG_NTFS_RW=y > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_PROC_VMCORE=y > CONFIG_PROC_SYSCTL=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_TMPFS_POSIX_ACL is not set > CONFIG_HUGETLBFS=y > CONFIG_HUGETLB_PAGE=y > CONFIG_RAMFS=y > CONFIG_CONFIGFS_FS=m > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_ECRYPT_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > CONFIG_CRAMFS=m > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=m > CONFIG_NFS_V3=y > CONFIG_NFS_V3_ACL=y > CONFIG_NFS_V4=y > CONFIG_NFS_DIRECTIO=y > CONFIG_NFSD=m > CONFIG_NFSD_V2_ACL=y > CONFIG_NFSD_V3=y > CONFIG_NFSD_V3_ACL=y > CONFIG_NFSD_V4=y > CONFIG_NFSD_TCP=y > CONFIG_LOCKD=m > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=m > CONFIG_NFS_ACL_SUPPORT=m > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=m > CONFIG_SUNRPC_GSS=m > CONFIG_RPCSEC_GSS_KRB5=m > CONFIG_RPCSEC_GSS_SPKM3=m > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > CONFIG_CIFS=m > # CONFIG_CIFS_STATS is not set > # CONFIG_CIFS_WEAK_PW_HASH is not set > CONFIG_CIFS_XATTR=y > CONFIG_CIFS_POSIX=y > # CONFIG_CIFS_DEBUG2 is not set > # CONFIG_CIFS_EXPERIMENTAL is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="utf8" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > CONFIG_NLS_CODEPAGE_936=m > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ASCII=y > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=m > > # > # Distributed Lock Manager > # > # CONFIG_DLM is not set > > # > # Instrumentation Support > # > CONFIG_PROFILING=y > CONFIG_OPROFILE=m > CONFIG_KPROBES=y > > # > # Kernel hacking > # > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > # CONFIG_PRINTK_TIME is not set > CONFIG_ENABLE_MUST_CHECK=y > CONFIG_MAGIC_SYSRQ=y > CONFIG_UNUSED_SYMBOLS=y > CONFIG_DEBUG_FS=y > # CONFIG_HEADERS_CHECK is not set > CONFIG_DEBUG_KERNEL=y > CONFIG_LOG_BUF_SHIFT=17 > CONFIG_DETECT_SOFTLOCKUP=y > CONFIG_SCHEDSTATS=y > # CONFIG_DEBUG_SLAB is not set > CONFIG_DEBUG_PREEMPT=y > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > CONFIG_DEBUG_SPINLOCK=y > CONFIG_DEBUG_MUTEXES=y > CONFIG_DEBUG_RWSEMS=y > CONFIG_DEBUG_LOCK_ALLOC=y > CONFIG_PROVE_LOCKING=y > CONFIG_LOCKDEP=y > CONFIG_DEBUG_LOCKDEP=y > CONFIG_TRACE_IRQFLAGS=y > CONFIG_DEBUG_SPINLOCK_SLEEP=y > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > CONFIG_STACKTRACE=y > # CONFIG_DEBUG_KOBJECT is not set > CONFIG_DEBUG_HIGHMEM=y > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_DEBUG_INFO=y > CONFIG_DEBUG_VM=y > # CONFIG_DEBUG_LIST is not set > # CONFIG_FRAME_POINTER is not set > # CONFIG_UNWIND_INFO is not set > CONFIG_FORCED_INLINING=y > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_LKDTM is not set > # CONFIG_FAULT_INJECTION is not set > CONFIG_EARLY_PRINTK=y > CONFIG_DEBUG_STACKOVERFLOW=y > CONFIG_DEBUG_STACK_USAGE=y > # CONFIG_DEBUG_RODATA is not set > CONFIG_4KSTACKS=y > CONFIG_X86_FIND_SMP_CONFIG=y > CONFIG_X86_MPPARSE=y > CONFIG_DOUBLEFAULT=y > > # > # Security options > # > CONFIG_KEYS=y > CONFIG_KEYS_DEBUG_PROC_KEYS=y > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_BLKCIPHER=m > CONFIG_CRYPTO_HASH=y > CONFIG_CRYPTO_MANAGER=y > CONFIG_CRYPTO_HMAC=y > # CONFIG_CRYPTO_XCBC is not set > CONFIG_CRYPTO_NULL=m > CONFIG_CRYPTO_MD4=m > CONFIG_CRYPTO_MD5=m > CONFIG_CRYPTO_SHA1=y > CONFIG_CRYPTO_SHA256=m > CONFIG_CRYPTO_SHA512=m > CONFIG_CRYPTO_WP512=m > # CONFIG_CRYPTO_TGR192 is not set > # CONFIG_CRYPTO_GF128MUL is not set > CONFIG_CRYPTO_ECB=m > CONFIG_CRYPTO_CBC=m > # CONFIG_CRYPTO_LRW is not set > CONFIG_CRYPTO_DES=m > CONFIG_CRYPTO_BLOWFISH=m > CONFIG_CRYPTO_TWOFISH=m > CONFIG_CRYPTO_TWOFISH_COMMON=m > # CONFIG_CRYPTO_TWOFISH_586 is not set > CONFIG_CRYPTO_SERPENT=m > CONFIG_CRYPTO_AES=m > CONFIG_CRYPTO_AES_586=m > CONFIG_CRYPTO_CAST5=m > CONFIG_CRYPTO_CAST6=m > CONFIG_CRYPTO_TEA=m > CONFIG_CRYPTO_ARC4=m > CONFIG_CRYPTO_KHAZAD=m > # CONFIG_CRYPTO_ANUBIS is not set > CONFIG_CRYPTO_DEFLATE=m > CONFIG_CRYPTO_MICHAEL_MIC=m > CONFIG_CRYPTO_CRC32C=m > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > # CONFIG_CRYPTO_DEV_PADLOCK is not set > CONFIG_CRYPTO_DEV_GEODE=m > > # > # Library routines > # > CONFIG_BITREVERSE=y > CONFIG_CRC_CCITT=m > # CONFIG_CRC16 is not set > CONFIG_CRC32=y > CONFIG_LIBCRC32C=m > CONFIG_AUDIT_GENERIC=y > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=m > CONFIG_PLIST=y > CONFIG_IOMAP_COPY=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_GENERIC_PENDING_IRQ=y > CONFIG_X86_SMP=y > CONFIG_X86_HT=y > CONFIG_X86_BIOS_REBOOT=y > CONFIG_X86_TRAMPOLINE=y > CONFIG_KTIME_SCALAR=y > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists