| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <20070108071621.GA4308@pool-71-123-103-45.spfdma.east.verizon.net>
Date: Mon, 08 Jan 2007 02:16:33 -0500
From: Eric Buddington <ebuddington@...izon.net>
To: linux-kernel@...r.kernel.org
Subject: 2.6.20-rc3-mm1 BUG: at arch/i386/mm/highmem.c:52
Machine: Linux <...> 2.6.20-rc3-mm1 #2 Mon Jan 8 00:24:59 EST 2007 i686 unknown
In normal (light) use, I experienced a long (~20s?) freeze, and errors
regarding hdc appeared in dmesg, along with the BUG. SMART on hdc
doesn't report any errors except a bad SMART checksum (I think that
may have been there before). It may be a hardware problem, but I
figure the BUG is relevant anyway.
Anyway, here's the dmesg and SMART output:
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: no DRQ after issuing MULTWRITE_EXT
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: no DRQ after issuing MULTWRITE_EXT
ide0: reset: success
BUG: at arch/i386/mm/highmem.c:52 kmap_atomic()
[<c0114fff>] kmap_atomic+0xae/0x1b4
[<c0316102>] ide_pio_sector+0x5e/0x11c
[<c0316438>] pre_task_out_intr+0x9a/0xa5
[<c0311b24>] ide_do_request+0x6d5/0x871
[<c011f1e7>] getnstimeofday+0x2b/0xac
[<c012c1ff>] do_clockevents_set_next_event+0x6f/0x76
[<c012c333>] clockevents_set_next_event+0x70/0x7c
[<c0312392>] ide_timer_expiry+0x223/0x230
[<c012a4af>] hrtimer_interrupt+0x188/0x1b1
[<c031216f>] ide_timer_expiry+0x0/0x230
[<c011f535>] run_timer_softirq+0xe0/0x12f
[<c011c238>] __do_softirq+0x35/0x75
[<c011c29a>] do_softirq+0x22/0x26
[<c011c4c7>] irq_exit+0x29/0x58
[<c0106912>] do_IRQ+0x87/0x9d
[<c0103b6d>] default_idle+0x0/0x39
[<c0105543>] common_interrupt+0x23/0x28
[<c0103b6d>] default_idle+0x0/0x39
[<c0103b94>] default_idle+0x27/0x39
[<c0103385>] cpu_idle+0x45/0x64
[<c0664aaf>] start_kernel+0x303/0x307
[<c066442b>] unknown_bootoption+0x0/0x20c
=======================
ide1: reset: success
BUG: at arch/i386/mm/highmem.c:52 kmap_atomic()
[<c0114fff>] kmap_atomic+0xae/0x1b4
[<c0316102>] ide_pio_sector+0x5e/0x11c
[<c0316438>] pre_task_out_intr+0x9a/0xa5
[<c0311b24>] ide_do_request+0x6d5/0x871
[<c013499e>] default_enable+0x12/0x1b
[<c0134956>] check_irq_resend+0x12/0x48
[<c0312dbd>] reset_pollfunc+0x0/0x188
[<c0312392>] ide_timer_expiry+0x223/0x230
[<c012a4af>] hrtimer_interrupt+0x188/0x1b1
[<c031216f>] ide_timer_expiry+0x0/0x230
[<c011f535>] run_timer_softirq+0xe0/0x12f
[<c011c238>] __do_softirq+0x35/0x75
[<c011c29a>] do_softirq+0x22/0x26
[<c011c4c7>] irq_exit+0x29/0x58
[<c0106912>] do_IRQ+0x87/0x9d
[<c0105543>] common_interrupt+0x23/0x28
[<c049963e>] __sched_text_start+0x49e/0x520
[<c0499c23>] schedule_timeout+0x13/0x97
[<c045cd4f>] unix_poll+0x25/0xa5
[<c0159501>] do_sys_poll+0x253/0x325
[<c0159f0e>] __pollwait+0x0/0xab
[<c01160c3>] default_wake_function+0x0/0xc
[<c011fcaa>] do_timer+0x5b3/0x702
[<c0291acc>] mmx_clear_page+0x24/0x60
[<c019bd7d>] journal_mark_dirty+0x184/0x286
[<c0499624>] __sched_text_start+0x484/0x520
[<c019799f>] pathrelse+0x18/0x2b
[<c0127678>] autoremove_wake_function+0x0/0x35
[<c019e180>] do_journal_end+0x335/0xb83
[<c01153ff>] __activate_task+0x1c/0x28
[<c01152d4>] __wake_up_common+0x31/0x4f
[<c01152d4>] __wake_up_common+0x31/0x4f
[<c0499e94>] mutex_lock+0xb/0x19
[<c045dcde>] unix_stream_recvmsg+0x35f/0x40f
[<c040667f>] sock_aio_read+0xc1/0xcd
[<c0135774>] file_read_actor+0x0/0xd1
[<c014fd43>] do_sync_read+0xc7/0x10a
[<c0127678>] autoremove_wake_function+0x0/0x35
[<c015053f>] vfs_read+0x9c/0x134
[<c0159607>] sys_poll+0x34/0x37
[<c0104b32>] sysenter_past_esp+0x5f/0x85
=======================
BUG: soft lockup detected on CPU#0!
[<c011fe65>] update_process_times+0x33/0x55
[<c0129fdc>] hrtimer_sched_tick+0x5d/0x9e
[<c012a445>] hrtimer_interrupt+0x11e/0x1b1
[<c0107316>] timer_interrupt+0x1a/0x20
[<c0133f99>] handle_IRQ_event+0x1a/0x3f
[<c0134bb2>] handle_edge_irq+0xa5/0xd7
[<c010690d>] do_IRQ+0x82/0x9d
[<c016b277>] bio_add_page+0x31/0x37
[<c0105543>] common_interrupt+0x23/0x28
[<c03c1baa>] bitmap_daemon_work+0x48/0x251
[<c03bf42c>] md_check_recovery+0x18/0x3f4
[<c03162b9>] task_in_intr+0x0/0xe5
[<c0133f99>] handle_IRQ_event+0x1a/0x3f
[<c03aa7fb>] raid1d+0x24/0xc47
[<c011c4de>] irq_exit+0x40/0x58
[<c0106912>] do_IRQ+0x87/0x9d
[<c03162af>] task_out_intr+0x93/0x9d
[<c0499624>] __sched_text_start+0x484/0x520
[<c0134bc6>] handle_edge_irq+0xb9/0xd7
[<c0499c93>] schedule_timeout+0x83/0x97
[<c011f6e9>] process_timeout+0x0/0x5
[<c03c0d0e>] md_thread+0xc5/0xdb
[<c0127678>] autoremove_wake_function+0x0/0x35
[<c03c0c49>] md_thread+0x0/0xdb
[<c012751b>] kthread+0xa0/0xc9
[<c012747b>] kthread+0x0/0xc9
[<c01056c3>] kernel_thread_helper+0x7/0x10
=======================
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6L300R0
Serial Number: L60MDVEH
Firmware Version: BAH41E00
User Capacity: 300,090,728,448 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Mon Jan 8 02:12:10 2007 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2343) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 182 182 063 Pre-fail Always - 27674
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 144
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 251 245 187 Pre-fail Always - 44375
9 Power_On_Hours 0x0032 233 233 000 Old_age Always - 30303
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 38
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 035 253 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 5376
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 241 241 000 Old_age Offline - 151
210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2 -
# 2 Short offline Completed without error 00% 0 -
# 3 Offline Aborted by host 70% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists