[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070109225940.GG17269@csclub.uwaterloo.ca>
Date: Tue, 9 Jan 2007 17:59:40 -0500
From: lsorense@...lub.uwaterloo.ca (Lennart Sorensen)
To: "Jeff V. Merkey" <jmerkey@...fmountaingroup.com>
Cc: Linux kernel <linux-kernel@...r.kernel.org>
Subject: Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
On Tue, Jan 09, 2007 at 01:46:42PM -0700, Jeff V. Merkey wrote:
> I just finished pulling out a melted IDE flash drive out of a Shuttle
> motherboard with the intel 945 chipset which claims to support
> SATA and IDE drives concurrently under Linux 2.6.18.
>
> The chip worked for about 30 seconds before liquifying in the chassis.
> I note that the 945 chipset in the shuttle PC had some serious
> issues recognizing 2 x SATA devices and a IDE device concurrently. Are
> there known problems with the Linux drivers
> with these newer chipsets.
Had the drive ever been used in any other machine? Had any ide device
ever been used in this machine before? It really sounds like a hardware
problem, since I can't think of anything software could do to make that
kind of current go through the flash drive.
I remember seeing the controller chip on a 730MB quantum scsi drive
start to glow red many years ago, just before the drive stopped
responding to the system (and I turned off the power). Hardware does
fail. It almost never has anything to do with software.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists