| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070112145710.GA29884@localdomain> Date: Fri, 12 Jan 2007 16:57:10 +0200 From: Dan Aloni <da-x@...atomic.org> To: "Eric W. Biederman" <ebiederm@...ssion.com> Cc: Linux Kernel List <linux-kernel@...r.kernel.org>, Greg KH <gregkh@...e.de>, linux-usb-devel@...ts.sourceforge.net Subject: Re: kexec + USB storage in 2.6.19 On Fri, Jan 12, 2007 at 07:05:09AM -0700, Eric W. Biederman wrote: > Dan Aloni <da-x@...atomic.org> writes: > > > Hello, > > > > After upgrading from 2.6.18.3 to 2.6.19.2 on an x86_64 machine I noticed > > that the EHCI USB host is unable to work properly after a kexec invocation. > > This makes it impossible to mount the rootfs in the configuration I'm using. > > > > According to the prints, the irq changes from 23 to 10. > > > > NOTE: Since the device is already connected at boot, I've added a patch > > that disables the scanning delay for the first detected device, in order > > to shorten the time it takes for the boot process. It worked on 2.6.18.3, > > so I wonder what has changed... > > At first glance it looks like acpi didn't come on in the kexec'd kernel. > Do you see anything like the line below. > > [ 78.139976] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ > > Could your provide the full bootlogs instead of these partial ones? > There is enough context missing I don't think anyone can do more than > agree you are seeing a problem. Looks like you were right about the ACPI being disabled during boot. I'm attaching the full logs. Note that there are a few additions to the kernel, some are known to everyone (kdb), and the others are self-bred facilities for tracing, logging across kexec-invocations, and specialized memory pools (respectively, dandalf, permamem, prebb), but these are not related to the problem that we see here. Just for the record, I also used a modified version of gcc 4.1.1 that adds a switch (see the 'Re: [PATCH] add -foverride-comp-dir' thread on gcc-devel) - it should also be completely disconnected from this problem as well. This kernel was also patched for retrying to mount the root dev with a timeout, also to reduce execution time. Sorry that I can't test with the vanilla kernel - it's a specialized environment. All changes are available under GPL on request. [ 8655.114721] Starting new kernel [ 0.000000] Linux version 2.6.19.2-xiv-34-x86_64-misc (dan@...135) (gcc version 4.1.1 (xiv)) #4 SMP Fri Jan 12 14:03:34 IST 2007 [ 0.000000] Command line: ro root=/dev/sda1 rootdelay=10 init=/xiv/system/xinit console=ttyS0,115200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000100 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 1 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 1 -> 155 [ 0.000000] 0: 256 -> 851824 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] WARNING: NR_CPUS limit of 2 reached. Processor ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] WARNING: NR_CPUS limit of 2 reached. Processor ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 4, address 0xfec80400, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec84000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 5, address 0xfec84000, GSI 72-95 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec84400] gsi_base[96]) [ 0.000000] IOAPIC[4]: apic_id 8, address 0xfec84400, GSI 96-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009b000 - 000000000009c000 [ 0.000000] Nosave address range: 000000000009c000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 0000000000100000 [ 0.000000] Nosave address range: 00000000cff70000 - 00000000cff78000 [ 0.000000] Nosave address range: 00000000cff78000 - 00000000cff80000 [ 0.000000] Nosave address range: 00000000cff80000 - 00000000d0000000 [ 0.000000] Nosave address range: 00000000d0000000 - 00000000e0000000 [ 0.000000] Nosave address range: 00000000e0000000 - 00000000f0000000 [ 0.000000] Nosave address range: 00000000f0000000 - 00000000fec00000 [ 0.000000] Nosave address range: 00000000fec00000 - 00000000fec10000 [ 0.000000] Nosave address range: 00000000fec10000 - 00000000fee00000 [ 0.000000] Nosave address range: 00000000fee00000 - 00000000fee01000 [ 0.000000] Nosave address range: 00000000fee01000 - 00000000ff800000 [ 0.000000] Nosave address range: 00000000ff800000 - 00000000ffc00000 [ 0.000000] Nosave address range: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 34176 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1029907 [ 0.000000] Kernel command line: ro root=/dev/sda1 rootdelay=10 init=/xiv/system/xinit console=ttyS0,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 8655.473910] Console: colour VGA+ 80x25 [ 8655.911117] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 8655.921834] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 8655.929466] Checking aperture... [ 8655.932837] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8655.978621] Placing software IO TLB between 0x5900000 - 0x9900000 [ 8655.984713] permamem: initializing [ 8655.988113] permamem: allocating dandalf at 0000000020000000 with 48 MBs, virt ffff810020000000, page ffff810001700000 [ 8656.000350] prebb: allocation for objsize 1048576 (2 objects) succeeded [ 8656.013001] prebb: allocation for objsize 8192 (1280 objects) succeeded [ 8656.019631] prebb: activated with 2 prebb pools [ 8656.062066] Memory: 3985264k/4980736k available (2867k kernel code, 207768k reserved, 1839k data, 264k init) [ 8656.149100] Calibrating delay using timer specific routine.. 5604.62 BogoMIPS (lpj=11209254) [ 8656.178702] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved kdb_cmd[0]: defcmd archkdb "" "First line arch debugging" kdb_cmd[7]: defcmd archkdbcpu "" "archkdb with only tasks on cpus" kdb_cmd[14]: defcmd archkdbshort "" "archkdb with less detailed backtrace" kdb_cmd[21]: defcmd archkdbcommon "" "Common arch debugging" [ 8656.210293] dandalf: partition entries size 15442 KB [ 8656.215252] dandalf: partition vardata size 3676 KB [ 8656.220121] dandalf: partition logptrs size 2451 KB [ 8656.224990] dandalf: partition modentries size 490 KB [ 8656.230032] dandalf: partition modvardata size 2451 KB [ 8656.235340] dandalf: initialization succeeded [ 8656.239746] Mount-cache hash table entries: 256 [ 8656.244416] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 8656.249656] CPU: L2 cache: 2048K [ 8656.252876] using mwait in idle threads. [ 8656.256791] CPU: Physical Processor ID: 0 [ 8656.260794] CPU: Processor Core ID: 0 [ 8656.264477] Freeing SMP alternatives: 24k freed [ 8656.269024] ACPI: Core revision 20060707 [ 8656.272980] ACPI Error (tbxfroot-0512): Could not map memory at 0000040E for length 2 [20060707] [ 8656.281789] ACPI Exception (tbxfroot-0400): AE_NO_MEMORY, RSDP structure not found - Flags=8 [20060707] [ 8656.291201] ACPI: System description tables not found [ 8656.296239] ACPI Exception (tbxface-0076): AE_NOT_FOUND, Could not get the RSDP [20060707] [ 8656.304521] ACPI Exception (tbxface-0120): AE_NOT_FOUND, Could not load tables [20060707] [ 8656.312711] ACPI: Unable to load the System Description Tables [ 8656.359049] Using local APIC timer interrupts. [ 8656.399123] result 12500612 [ 8656.401912] Detected 12.500 MHz APIC timer. [ 8656.408772] Booting processor 1/2 APIC 0x6 [ 8656.423423] Initializing CPU#1 [ 8656.500442] Calibrating delay using timer specific routine.. 5600.74 BogoMIPS (lpj=11201480) [ 8656.500456] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 8656.500460] CPU: L2 cache: 2048K [ 8656.500464] CPU: Physical Processor ID: 3 [ 8656.500466] CPU: Processor Core ID: 0 [ 8656.500478] CPU1: Thermal monitoring enabled (TM1) [ 8656.500907] Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 8656.504479] Brought up 2 CPUs [ 8656.546386] testing NMI watchdog ... OK. [ 8656.590251] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 8656.596421] time.c: Detected 2800.161 MHz processor. [ 8656.977181] migration_cost=1789 [ 8656.980875] NET: Registered protocol family 16 [ 8656.989756] PCI: Using MMCONFIG at e0000000 [ 8656.994212] PCI: No mmconfig possible on device 08:01 [ 8657.000006] ACPI: Interpreter disabled. [ 8657.003847] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8657.009501] pnp: PnP ACPI: disabled [ 8657.018700] SCSI subsystem initialized [ 8657.022518] usbcore: registered new interface driver usbfs [ 8657.028018] usbcore: registered new interface driver hub [ 8657.033352] usbcore: registered new device driver usb [ 8657.038431] PCI: Probing PCI hardware [ 8657.042503] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 8657.048928] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 8657.054601] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [ 8657.060578] PCI: PXH quirk detected, disabling MSI for SHPC device [ 8657.066784] PCI: PXH quirk detected, disabling MSI for SHPC device [ 8657.073305] PCI: PXH quirk detected, disabling MSI for SHPC device [ 8657.079518] PCI: PXH quirk detected, disabling MSI for SHPC device [ 8657.086047] PCI: Transparent bridge - 0000:00:1e.0 [ 8657.091757] PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0 [ 8657.098423] PCI-GART: No AMD northbridge found. [ 8657.103100] PCI: Bridge: 0000:01:00.0 [ 8657.106754] IO window: 2000-2fff [ 8657.110155] MEM window: dc200000-dc2fffff [ 8657.114330] PREFETCH window: d1800000-d18fffff [ 8657.118941] PCI: Bridge: 0000:01:00.2 [ 8657.122597] IO window: 3000-3fff [ 8657.126000] MEM window: dc300000-dc3fffff [ 8657.130175] PREFETCH window: disabled. [ 8657.134095] PCI: Bridge: 0000:00:02.0 [ 8657.137752] IO window: 2000-3fff [ 8657.141156] MEM window: dc100000-dc3fffff [ 8657.145331] PREFETCH window: d1800000-d18fffff [ 8657.149943] PCI: Bridge: 0000:00:04.0 [ 8657.153597] IO window: disabled. [ 8657.156992] MEM window: disabled. [ 8657.160476] PREFETCH window: disabled. [ 8657.164398] PCI: Bridge: 0000:05:00.0 [ 8657.168052] IO window: 4000-4fff [ 8657.171454] MEM window: dc500000-dcbfffff [ 8657.175629] PREFETCH window: d1000000-d13fffff [ 8657.180240] PCI: Bridge: 0000:05:00.2 [ 8657.183897] IO window: 5000-5fff [ 8657.187299] MEM window: dcc00000-dd0fffff [ 8657.191477] PREFETCH window: d1400000-d17fffff [ 8657.196086] PCI: Bridge: 0000:00:06.0 [ 8657.199743] IO window: 4000-5fff [ 8657.203145] MEM window: dc400000-dd0fffff [ 8657.207320] PREFETCH window: d1000000-d17fffff [ 8657.211935] PCI: Bridge: 0000:00:1e.0 [ 8657.215589] IO window: 6000-6fff [ 8657.218988] MEM window: dd100000-deffffff [ 8657.223169] PREFETCH window: d1900000-d19fffff [ 8657.227903] NET: Registered protocol family 2 [ 8657.267053] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 8657.274895] TCP established hash table entries: 131072 (order: 10, 4194304 bytes) [ 8657.284596] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 8657.292489] TCP: Hash tables configured (established 131072 bind 65536) [ 8657.299102] TCP reno registered [ 8657.302360] Simple Boot Flag at 0x39 set to 0x80 [ 8657.307636] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. [ 8657.313794] SGI XFS with large block/inode numbers, no debug enabled [ 8657.320360] io scheduler noop registered [ 8657.324297] io scheduler anticipatory registered (default) [ 8657.329806] io scheduler deadline registered [ 8657.334104] io scheduler cfq registered [ 8657.354521] Real Time Clock Driver v1.12ac [ 8657.358616] Linux agpgart interface v0.101 (c) Dave Jones [ 8657.364003] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 8657.371908] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8657.378011] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8657.384307] Floppy drive(s): fd0 is 1.44M [ 8657.408129] FDC 0 is a National Semiconductor PC87306 [ 8657.414492] RAMDISK driver initialized: 16 RAM disks of 80000K size 1024 blocksize [ 8657.422224] loop: loaded (max 8 devices) [ 8657.426252] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 8657.432595] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 8657.440617] ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2 [ 8657.446452] ICH5-SATA: chipset revision 2 [ 8657.450454] ICH5-SATA: not 100% native mode: will probe irqs later [ 8657.456625] ide0: BM-DMA at 0x14b0-0x14b7, BIOS settings: hda:DMA, hdb:pio [ 8657.463883] ide1: BM-DMA at 0x14b8-0x14bf, BIOS settings: hdc:pio, hdd:pio [ 8657.762190] hda: HDS725050KLA360, ATA DISK drive [ 8658.440928] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8659.586567] hda: max request size: 1024KiB [ 8659.596977] hda: 976773168 sectors (500107 MB) w/15607KiB Cache, CHS=60801/255/63, UDMA(33) [ 8659.605577] hda: cache flushes supported [ 8659.609553] hda: hda1 [ 8659.617253] block2mtd: version $Revision: 1.30 $ [ 8659.621859] usbmon: debugfs is not available [ 8659.626919] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8659.632208] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 8659.639615] ehci_hcd 0000:00:1d.7: debug port 1 [ 8659.644155] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xdc001000 [ 8659.653678] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8659.661254] usb usb1: configuration #1 chosen from 1 choice [ 8659.666838] hub 1-0:1.0: USB hub found [ 8659.670587] hub 1-0:1.0: 8 ports detected [ 8659.782260] Initializing USB Mass Storage driver... [ 8659.787138] usbcore: registered new interface driver usb-storage [ 8659.793137] USB Mass Storage support registered. [ 8659.797792] PNP: No PS/2 controller found. Probing ports directly. [ 8659.806486] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8659.811448] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8659.816506] mice: PS/2 mouse device common for all mice [ 8659.821727] EDAC MC: Ver: 2.0.1 Jan 12 2007 [ 8659.826054] EDAC e752x: tolm = d0000, remapbase = 100000, remaplimit = 12c000 [ 8659.833227] EDAC MC0: Giving out device to e752x_edac E7520: DEV 0000:00:00.0 [ 8659.840385] EDAC e752x: Non-Fatal Error PCI Express B [ 8659.845431] EDAC e752x: Non-Fatal Error PCI Express B [ 8659.845443] TCP cubic registered [ 8659.853688] NET: Registered protocol family 1 [ 8659.858043] NET: Registered protocol family 17 [ 8659.862480] 802.1Q VLAN Support v1.8 Ben Greear <greearb@...delatech.com> [ 8659.869253] All bugs added by David S. Miller <davem@...hat.com> [ 8659.981933] VFS: retrying root mount [ 8660.033685] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 8660.484933] VFS: retrying root mount [ 8660.987963] VFS: retrying root mount [ 8661.039752] ehci_hcd 0000:00:1d.7: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [ 8661.487010] VFS: retrying root mount [ 8661.990045] VFS: retrying root mount [ 8662.493080] VFS: retrying root mount [ 8662.996115] VFS: retrying root mount [ 8663.499152] VFS: retrying root mount [ 8664.002186] VFS: retrying root mount [ 8664.505221] VFS: retrying root mount [ 8665.008258] VFS: retrying root mount [ 8665.511294] VFS: retrying root mount [ 8666.014330] VFS: retrying root mount [ 8666.517366] VFS: retrying root mount [ 8667.020401] VFS: retrying root mount [ 8667.523439] VFS: retrying root mount [ 8668.026473] VFS: retrying root mount [ 8668.529508] VFS: retrying root mount [ 8669.032544] VFS: retrying root mount [ 8669.535580] VFS: retrying root mount [ 8670.038617] VFS: Cannot open root device "sda1" or unknown-block(0,0) [ 8670.045045] Please append a correct "root=" boot option [ 8670.050259] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 8670.058502] Entering kdb (current=0xffff81012fcca7a0, pid 1) on processor 1 due to KDB_ENTER() [1]kdb> ---------------- A normal boot log: [ 0.000000] Linux version 2.6.19.2-xiv-34-x86_64-misc (dan@...135) (gcc version 4.1.1 (xiv)) #4 SMP Fri Jan 12 14:03:34 IST 2007 [ 0.000000] Command line: ro root=/dev/sda1 rootdelay=10 init=/xiv/system/xinit console=ttyS0,115200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 851824 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] WARNING: NR_CPUS limit of 2 reached. Processor ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] WARNING: NR_CPUS limit of 2 reached. Processor ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 4, address 0xfec80400, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec84000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 5, address 0xfec84000, GSI 72-95 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec84400] gsi_base[96]) [ 0.000000] IOAPIC[4]: apic_id 8, address 0xfec84400, GSI 96-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009b000 - 000000000009c000 [ 0.000000] Nosave address range: 000000000009c000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Nosave address range: 00000000cff70000 - 00000000cff78000 [ 0.000000] Nosave address range: 00000000cff78000 - 00000000cff80000 [ 0.000000] Nosave address range: 00000000cff80000 - 00000000d0000000 [ 0.000000] Nosave address range: 00000000d0000000 - 00000000e0000000 [ 0.000000] Nosave address range: 00000000e0000000 - 00000000f0000000 [ 0.000000] Nosave address range: 00000000f0000000 - 00000000fec00000 [ 0.000000] Nosave address range: 00000000fec00000 - 00000000fec10000 [ 0.000000] Nosave address range: 00000000fec10000 - 00000000fee00000 [ 0.000000] Nosave address range: 00000000fee00000 - 00000000fee01000 [ 0.000000] Nosave address range: 00000000fee01000 - 00000000ff800000 [ 0.000000] Nosave address range: 00000000ff800000 - 00000000ffc00000 [ 0.000000] Nosave address range: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 34176 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1029907 [ 0.000000] Kernel command line: ro root=/dev/sda1 rootdelay=10 init=/xiv/system/xinit console=ttyS0,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 87.927578] Console: colour VGA+ 80x25 [ 88.378396] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 88.389160] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 88.396798] Checking aperture... [ 88.400165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 88.446650] Placing software IO TLB between 0x5900000 - 0x9900000 [ 88.452744] permamem: initializing [ 88.456142] permamem: allocating dandalf at 0000000020000000 with 48 MBs, virt ffff810020000000, page ffff810001700000 [ 88.468414] prebb: allocation for objsize 1048576 (2 objects) succeeded [ 88.481074] prebb: allocation for objsize 8192 (1280 objects) succeeded [ 88.487706] prebb: activated with 2 prebb pools [ 88.530267] Memory: 3985264k/4980736k available (2867k kernel code, 207772k reserved, 1839k data, 264k init) [ 88.618737] Calibrating delay using timer specific routine.. 5604.65 BogoMIPS (lpj=11209307) [ 88.649777] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved kdb_cmd[0]: defcmd archkdb "" "First line arch debugging" kdb_cmd[7]: defcmd archkdbcpu "" "archkdb with only tasks on cpus" kdb_cmd[14]: defcmd archkdbshort "" "archkdb with less detailed backtrace" kdb_cmd[21]: defcmd archkdbcommon "" "Common arch debugging" [ 88.681922] dandalf: partition entries size 15442 KB [ 88.686882] dandalf: partition vardata size 3676 KB [ 88.692494] dandalf: partition logptrs size 2451 KB [ 88.697363] dandalf: partition modentries size 490 KB [ 88.702405] dandalf: partition modvardata size 2451 KB [ 88.707715] dandalf: initialization succeeded [ 88.712123] Mount-cache hash table entries: 256 [ 88.716798] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 88.722032] CPU: L2 cache: 2048K [ 88.725256] using mwait in idle threads. [ 88.729172] CPU: Physical Processor ID: 0 [ 88.733175] CPU: Processor Core ID: 0 [ 88.736844] CPU0: Thermal monitoring enabled (TM1) [ 88.741637] Freeing SMP alternatives: 24k freed [ 88.746175] ACPI: Core revision 20060707 [ 88.794449] Using local APIC timer interrupts. [ 88.834526] result 12500652 [ 88.837310] Detected 12.500 MHz APIC timer. [ 88.842473] Booting processor 1/2 APIC 0x6 [ 88.857137] Initializing CPU#1 [ 88.934146] Calibrating delay using timer specific routine.. 5600.65 BogoMIPS (lpj=11201313) [ 88.934160] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 88.934164] CPU: L2 cache: 2048K [ 88.934168] CPU: Physical Processor ID: 3 [ 88.934170] CPU: Processor Core ID: 0 [ 88.934182] CPU1: Thermal monitoring enabled (TM1) [ 88.934593] Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 88.938180] Brought up 2 CPUs [ 88.980735] testing NMI watchdog ... OK. [ 89.024608] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 89.030776] time.c: Detected 2800.166 MHz processor. [ 89.376365] migration_cost=1743 [ 89.380050] NET: Registered protocol family 16 [ 89.384546] ACPI: bus type pci registered [ 89.392937] PCI: Using MMCONFIG at e0000000 [ 89.397396] PCI: No mmconfig possible on device 08:01 [ 89.406174] ACPI: Interpreter enabled [ 89.409838] ACPI: Using IOAPIC for interrupt routing [ 89.415085] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 89.422404] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 89.428831] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 89.434507] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [ 89.440483] PCI: PXH quirk detected, disabling MSI for SHPC device [ 89.446688] PCI: PXH quirk detected, disabling MSI for SHPC device [ 89.453210] PCI: PXH quirk detected, disabling MSI for SHPC device [ 89.459417] PCI: PXH quirk detected, disabling MSI for SHPC device [ 89.466711] PCI: Transparent bridge - 0000:00:1e.0 [ 89.479098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 89.486286] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 89.493461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) [ 89.500635] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) [ 89.507809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 89.516137] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 89.524276] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 89.532604] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) [ 89.539559] ACPI: Device [PRT] status [0000000c]: functional but not present; setting present [ 89.549542] Linux Plug and Play Support v0.97 (c) Adam Belay [ 89.555203] pnp: PnP ACPI init [ 89.561717] pnp: PnP ACPI: found 12 devices [ 89.571619] SCSI subsystem initialized [ 89.575446] usbcore: registered new interface driver usbfs [ 89.580948] usbcore: registered new interface driver hub [ 89.586279] usbcore: registered new device driver usb [ 89.591366] PCI: Using ACPI for IRQ routing [ 89.595544] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 89.603921] PCI-GART: No AMD northbridge found. [ 89.608786] PCI: Bridge: 0000:01:00.0 [ 89.612443] IO window: 2000-2fff [ 89.615843] MEM window: dc200000-dc2fffff [ 89.620018] PREFETCH window: d1800000-d18fffff [ 89.624630] PCI: Bridge: 0000:01:00.2 [ 89.628285] IO window: 3000-3fff [ 89.631686] MEM window: dc300000-dc3fffff [ 89.635862] PREFETCH window: disabled. [ 89.639780] PCI: Bridge: 0000:00:02.0 [ 89.643436] IO window: 2000-3fff [ 89.646838] MEM window: dc100000-dc3fffff [ 89.651014] PREFETCH window: d1800000-d18fffff [ 89.655623] PCI: Bridge: 0000:00:04.0 [ 89.659280] IO window: disabled. [ 89.662681] MEM window: disabled. [ 89.666164] PREFETCH window: disabled. [ 89.670088] PCI: Bridge: 0000:05:00.0 [ 89.673741] IO window: 4000-4fff [ 89.677143] MEM window: dc500000-dcbfffff [ 89.681319] PREFETCH window: d1000000-d13fffff [ 89.685930] PCI: Bridge: 0000:05:00.2 [ 89.689585] IO window: 5000-5fff [ 89.692986] MEM window: dcc00000-dd0fffff [ 89.697161] PREFETCH window: d1400000-d17fffff [ 89.701772] PCI: Bridge: 0000:00:06.0 [ 89.705429] IO window: 4000-5fff [ 89.708830] MEM window: dc400000-dd0fffff [ 89.713005] PREFETCH window: d1000000-d17fffff [ 89.717617] PCI: Bridge: 0000:00:1e.0 [ 89.721272] IO window: 6000-6fff [ 89.725392] MEM window: dd100000-deffffff [ 89.729567] PREFETCH window: d1900000-d19fffff [ 89.734192] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 89.741630] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 89.749044] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 89.756514] NET: Registered protocol family 2 [ 89.796569] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 89.804412] TCP established hash table entries: 131072 (order: 10, 4194304 bytes) [ 89.814087] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 89.821987] TCP: Hash tables configured (established 131072 bind 65536) [ 89.828596] TCP reno registered [ 89.831856] Simple Boot Flag at 0x39 set to 0x80 [ 89.837134] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. [ 89.843285] SGI XFS with large block/inode numbers, no debug enabled [ 89.849848] io scheduler noop registered [ 89.853786] io scheduler anticipatory registered (default) [ 89.859287] io scheduler deadline registered [ 89.863583] io scheduler cfq registered [ 89.869471] ACPI: Power Button (FF) [PWRF] [ 89.873599] ACPI: Power Button (CM) [PWRB] [ 89.877792] Using specific hotkey driver [ 89.882065] ACPI: Getting cpuindex for acpiid 0x2 [ 89.886771] ACPI: Getting cpuindex for acpiid 0x3 [ 89.906793] Real Time Clock Driver v1.12ac [ 89.910887] Linux agpgart interface v0.101 (c) Dave Jones [ 89.916274] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 89.924184] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 89.930290] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 89.936703] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 89.942418] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 89.948155] Floppy drive(s): fd0 is 1.44M [ 89.971375] FDC 0 is a National Semiconductor PC87306 [ 89.977728] RAMDISK driver initialized: 16 RAM disks of 80000K size 1024 blocksize [ 89.985465] loop: loaded (max 8 devices) [ 89.989489] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 89.995829] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 90.003849] ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2 [ 90.009684] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 90.017090] ICH5-SATA: chipset revision 2 [ 90.021088] ICH5-SATA: not 100% native mode: will probe irqs later [ 90.027262] ide0: BM-DMA at 0x14b0-0x14b7, BIOS settings: hda:pio, hdb:pio [ 90.034522] ide1: BM-DMA at 0x14b8-0x14bf, BIOS settings: hdc:pio, hdd:pio [ 90.331630] hda: HDS725050KLA360, ATA DISK drive [ 91.010375] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 92.156005] hda: max request size: 1024KiB [ 92.171581] hda: 976773168 sectors (500107 MB) w/15607KiB Cache, CHS=60801/255/63, UDMA(33) [ 92.180178] hda: cache flushes supported [ 92.184147] hda: hda1 [ 92.189483] block2mtd: version $Revision: 1.30 $ [ 92.194093] usbmon: debugfs is not available [ 92.198399] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 92.206572] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 92.211860] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 92.219272] ehci_hcd 0000:00:1d.7: debug port 1 [ 92.223809] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc001000 [ 92.233343] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 92.240924] usb usb1: configuration #1 chosen from 1 choice [ 92.246515] hub 1-0:1.0: USB hub found [ 92.250264] hub 1-0:1.0: 8 ports detected [ 92.359690] Initializing USB Mass Storage driver... [ 92.599138] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 92.744533] usb 1-1: configuration #1 chosen from 1 choice [ 92.994378] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 93.139812] usb 1-2: configuration #1 chosen from 1 choice [ 93.145732] scsi0 : SCSI emulation for USB Mass Storage devices [ 93.151756] scsi1 : SCSI emulation for USB Mass Storage devices [ 93.157745] usbcore: registered new interface driver usb-storage [ 93.162086] scsi 0:0:0:0: Direct-Access OTi Flash Disk 2.00 PQ: 0 ANSI: 2 [ 93.171825] USB Mass Storage support registered. [ 93.176503] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 93.184381] SCSI device sda: 2037760 512-byte hdwr sectors (1043 MB) [ 93.191394] sda: Write Protect is off [ 93.191886] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 93.191894] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 93.191916] mice: PS/2 mouse device common for all mice [ 93.191927] EDAC MC: Ver: 2.0.1 Jan 12 2007 [ 93.214415] sda: assuming drive cache: write through [ 93.219475] EDAC e752x: tolm = d0000, remapbase = 100000, remaplimit = 12c000 [ 93.226645] EDAC MC0: Giving out device to e752x_edac E7520: DEV 0000:00:00.0 [ 93.233832] TCP cubic registered [ 93.237066] NET: Registered protocol family 1 [ 93.241421] NET: Registered protocol family 17 [ 93.245858] 802.1Q VLAN Support v1.8 Ben Greear <greearb@...delatech.com> [ 93.252639] All bugs added by David S. Miller <davem@...hat.com> [ 93.260363] SCSI device sda: 2037760 512-byte hdwr sectors (1043 MB) [ 93.267221] sda: Write Protect is off [ 93.270885] sda: assuming drive cache: write through [ 93.275846] sda: sda1 sda2 sda3 [ 93.279962] sd 0:0:0:0: Attached scsi removable disk sda [ 93.371900] VFS: Mounted root (ext2 filesystem) readonly. [ 93.377313] xiv: board Supermicro X6DH8-XG2 [ 93.381538] Freeing unused kernel memory: 264k freed - Dan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists