[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <45C86405.1070902@gmail.com>
Date: Tue, 06 Feb 2007 12:18:29 +0100
From: Jiri Slaby <jirislaby@...il.com>
To: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: Jiri Slaby <jirislaby@...il.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Pavel Machek <pavel@...e.cz>, linux-pm@...l.org
Subject: Re: hwsusp defunct
Rafael J. Wysocki napsal(a):
> Hi,
>
> On Sunday, 4 February 2007 14:12, Jiri Slaby wrote:
>> Hi.
>>
>> When I'm trying to suspend to mem one machine, it wakes immediatly back with
>> nothing notable in dmesg:
> [--snip--]
>> Will PM_DEBUG or ACPI_DEBUG help somehow? Or later kernel?
>
> Later kernel might help, some important fixes have gone in since 2.6.19,
> PCI quirks-related etc.
>
> Please try 2.6.20-rc7 and if that doesn't help, try the latest -mm.
2.6.20 from init 2 is no go either, -mm (-rc6-mm3) with minimal config [1]
suspends, no key was able to resume it back, only power button, but monitor
doesn't wake (actually I've this problem on another machine when X is not
running) -- how to debug both of this? Do not suspend consoles? PM_TRACE (this
won't help since it completely resumes, I guess)?
This is blindly written dmesg after resume. See it whole at [2]:
Suspending device 0.0
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000007) is beyon
d end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_]
(Node dfe64fcc), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0._
GTM] (Node dfe649f0), AE_AML_PACKAGE_LIMIT
...
hda: selected mode 0x45
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA]
(Node dfe64ec8), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.D
RV1._GTF] (Node dfe64964), AE_AML_OPERAND_VALUE
do_drive_get_GTF: Run _GTF error: status = 0x3006
$ ls -l /sys/block/hda/device
lrwxrwxrwx 1 root root 0 úno 6 12:14 /sys/block/hda/device ->
../../devices/pci0000:00/0000:00:1f.1/ide0/0.0
$ ls -l /sys/block/hda/device/driver
lrwxrwxrwx 1 root root 0 úno 6 12:15 /sys/block/hda/device/driver ->
../../../../../bus/ide/drivers/ide-disk
$ ls -l /sys/block/hda/device/driver/0.0
lrwxrwxrwx 1 root root 0 úno 6 12:16 /sys/block/hda/device/driver/0.0 ->
../../../../devices/pci0000:00/0000:00:1f.1/ide0/0.0
# lspci -vvvxxs 0000:00:1f.1
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 30100000 (32-bit, non-prefetchable) [size=1K]
00: 86 80 db 24 07 00 80 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 fc 00 00 00 00 10 30 00 00 00 00 43 10 a6 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
Do you want acpidump? Should I test 2.6.20 with minimal config?
[1]
http://www.fi.muni.cz/~xslaby/sklad/config-mm
[2]
http://www.fi.muni.cz/~xpapiez/test/dmesg-mm.txt
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists