linux-kernel - Serial console issues.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <45D0D09D.8010807@techmoninc.com>
Date:	Mon, 12 Feb 2007 14:39:57 -0600
From:	Andy Kennedy <akennedy@...hmoninc.com>
To:	linux-kernel@...r.kernel.org
Subject: Serial console issues.

For those of you who are on BusyBox's mailing list, you've already seen 
this -- I was sent here for help.

Specs:
Linux:  2.6.18
Bootloader:  SysLinux
Init:  BusyBox (ver 1.4.0) init.
Kernel command line: console=ttyS0,115200,n,8,1
System: VersaLogic 568 (STD80/STD32 Bus, i386 based computer)
Issue:  Booting on "System" I get perfect printk's to the serial 
console.  When the init takes over (from within an initrd), the console 
begins to miss characters.  I can still send write commands through the 
console, however, the output of these commands is garbled.  The really 
odd part is when the init releases control (is killed by Linux), or when 
a printk is issued, the console prints perfectly again.  The next really 
strange part about this is that changing "System" to my laptop -- no 
problems PERIOD. 

The BusyBox list directed me to LKML as this is a wider base of users 
that may have experienced the same problem and could provide me an answer.

Thanks in advance for the help (and sorry for asking such a non-related 
issue on the LKML),
Andy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/