| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <45D109AC.6080102@shaw.ca> Date: Mon, 12 Feb 2007 18:43:24 -0600 From: Robert Hancock <hancockr@...w.ca> To: Joseph Cosby <jo-cosby@...mail.com> Cc: linux-kernel@...r.kernel.org Subject: Re: SATA Drive No Longer Recognized In New 2.6.20 Kernel Joseph Cosby wrote: > Hi, > Until recently I was using the 2.6.18 kernel. I have a SATA hard drive > that was detected by the kernel, using the PIIX driver. But after > updating to 2.6.20, the hard drive is no longer detected by the kernel. > I used make oldconfig to create the 2.6.20 config file, and I noticed a > new option CONFIG_ATA. I did not use this, because as I understand it is > not necessary and is experimental. Do I need to use this or is there > something else in the new kernel that needs to be enabled for this > driver? > > My 2.6.20 config file follows. > The hard drive has vendor ID 8086 and device ID 27c0. It is listed in the > modules.pcilist file of 2.6.18 but not 2.6.20. > > If anybody can share any advice please CC me in response. Yes, you do need CONFIG_ATA if you were using ata_piix before (and of course the PIIX driver also needs to be enabled). All of the libata drivers were moved from under the SCSI menu into a new ATA menu (in 2.6.19 I think). -- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@...pamshaw.ca Home Page: http://www.roberthancock.com/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists