| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 14 Feb 2007 09:57:32 +0100
From: Manuel Metz <mmetz@...ro.uni-bonn.de>
To: linux-kernel@...r.kernel.org
Subject: Re: SATA ahci Bug in 2.6.19.x
Stefan Priebe - FH wrote:
> Hi!
>
> Any News?
>
> Stefan
>
> Stefan Priebe - FH schrieb:
>> Hi!
>>
>> acpi=off does not help i've already tried that.
>>
>>
>> Ok here some outputs:
>> 1.) complete dmesg with 2.6.16.27 (works)
>>
>> Linux version 2.6.16.27amd (root@...ver275-han) (gcc version 3.3.5
>> (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> Scanning NUMA topology in Northbridge 24
>> Number of nodes 1
>> Node 0 MemBase 0000000000000000 Limit 000000003bfb0000
>> NUMA: Using 63 for the hash shift.
>> Using node hash shift of 63
>> Bootmem setup node 0 0000000000000000-000000003bfb0000
>> On node 0 totalpages: 240991
>> DMA zone: 2709 pages, LIFO batch:0
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages, LIFO batch:0
>> HighMem zone: 0 pages, LIFO batch:0
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 15:15 APIC version 16
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Built 1 zonelists
>> Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 131072 bytes)
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.214 MHz processor.
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Memory: 962212k/982720k available (2939k kernel code, 20120k reserved,
>> 1327k data, 220k init)
>> Calibrating delay using timer specific routine.. 4810.51 BogoMIPS
>> (lpj=9621030)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> CPU 0(1) -> Node 0 -> Core 0
>> Using local APIC timer interrupts.
>> result 12501128
>> Detected 12.501 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> migration_cost=0
>> DMI 2.3 present.
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: Using configuration type 1
>> PCI: Using MMCONFIG at e0000000
>> ACPI: Subsystem revision 20060127
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> GSI 16 sharing vector 0xA9 and IRQ 16
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> GSI 17 sharing vector 0xB1 and IRQ 17
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered (default)
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie01]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> Allocate Port Service[0000:00:02.0:pcie03]
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie01]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> Allocate Port Service[0000:00:03.0:pcie03]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> isa bounce pool size: 16 pages
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
>> Copyright (c) 1999-2005 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>> e100: Copyright(c) 1999-2005 Intel Corporation
>> via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>> GSI 18 sharing vector 0xD1 and IRQ 18
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
>> netconsole: device eth0 not up yet, forcing it
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> netconsole: carrier detect appears untrustworthy, waiting 4 seconds
>> netconsole: network logging started
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50)
>> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
>> megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.04
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>> libata version 1.20 loaded.
>> ahci 0000:00:0f.0: version 1.2
>> GSI 19 sharing vector 0xD9 and IRQ 19
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
>> ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01
>> 87:4023 88:40ff
>> ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
>> ata1: dev 0 configured for UDMA/133
>> scsi0 : ahci
>> ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01
>> 87:4023 88:40ff
>> ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
>> ata2: dev 0 configured for UDMA/133
>> scsi1 : ahci
>> ata3: no device found (phy stat 00000000)
>> scsi2 : ahci
>> ata4: no device found (phy stat 00000000)
>> scsi3 : ahci
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> sda: sda1 < sda5 sda6 sda7 >
>> sd 0:0:0:0: Attached scsi disk sda
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> sdb: sdb1 < sdb5 sdb6 sdb7 >
>> sd 1:0:0:0: Attached scsi disk sdb
>> Fusion MPT base driver 3.03.07
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.03.07
>> mice: PS/2 mouse device common for all mice
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> TCP bic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV)
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>> cpu_init done, current fid 0x10, vid 0x6
>> XFS mounting filesystem sda6
>> Ending clean XFS mount for filesystem: sda6
>> VFS: Mounted root (xfs filesystem) readonly.
>> Freeing unused kernel memory: 220k freed
>> Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k
>>
>>
>>
>> 2.) complete dmesg output with 2.6.18.6 (works)
>> Linux version 2.6.18.3amd (root@...erserver) (gcc version 3.3.5
>> (Debian 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> DMI 2.3 present.
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> On node 0 totalpages: 240803
>> DMA zone: 2521 pages, LIFO batch:0
>> DMA32 zone: 238282 pages, LIFO batch:31
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 15:15 APIC version 16
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> Built 1 zonelists. Total pages: 240803
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.084 MHz processor.
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961352k/982720k available (3487k kernel code, 20768k reserved,
>> 1452k data, 228k init)
>> Calibrating delay using timer specific routine.. 4804.44 BogoMIPS
>> (lpj=9608882)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 28k freed
>> ACPI: Core revision 20060707
>> Using local APIC timer interrupts.
>> result 12500453
>> Detected 12.500 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> migration_cost=0
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: Using configuration type 1
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> GSI 16 sharing vector 0xA9 and IRQ 16
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> GSI 17 sharing vector 0xB1 and IRQ 17
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> ACPI: Getting cpuindex for acpiid 0x2
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>> e100: Copyright(c) 1999-2005 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
>> GSI 18 sharing vector 0xD1 and IRQ 18
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>> libata version 2.00 loaded.
>> ahci 0000:00:0f.0: version 2.0
>> GSI 19 sharing vector 0xD9 and IRQ 19
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
>> scsi0 : ahci
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>> ata1.00: ata1: dev 0 multi count 16
>> ata1.00: configured for UDMA/133
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>> ata2.00: ata2: dev 0 multi count 16
>> ata2.00: configured for UDMA/133
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> sda: sda1 < sda5 sda6 sda7 >
>> sd 0:0:0:0: Attached scsi disk sda
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> sdb: sdb1 < sdb5 sdb6 sdb7 >
>> sd 1:0:0:0: Attached scsi disk sdb
>> Fusion MPT base driver 3.04.01
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.01
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> mice: PS/2 mouse device common for all mice
>> TCP bic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>>
>>
>> 3.) complete output (2.6.19.2) (with acpi does not work)
>>
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> end_pfn_map = 1048576
>> DMI 2.3 present.
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> DMA32 4096 -> 1048576
>> Normal 1048576 -> 1048576
>> early_node_map[2] active PFN ranges
>> 0: 0 -> 159
>> 0: 256 -> 245680
>> On node 0 totalpages: 245583
>> DMA zone: 56 pages used for memmap
>> DMA zone: 1474 pages reserved
>> DMA zone: 2469 pages, LIFO batch:0
>> DMA32 zone: 3302 pages used for memmap
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages used for memmap
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 (Bootup-CPU)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Nosave address range: 000000000009f000 - 00000000000a0000
>> Nosave address range: 00000000000a0000 - 00000000000e4000
>> Nosave address range: 00000000000e4000 - 0000000000100000
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> PERCPU: Allocating 36352 bytes of per cpu data
>> Built 1 zonelists. Total pages: 240751
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
>> 1474k data, 264k init)
>> Calibrating delay using timer specific routine.. 4804.06 BogoMIPS
>> (lpj=9608139)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 32k freed
>> ACPI: Core revision 20060707
>> Using local APIC timer interrupts.
>> result 12501046
>> Detected 12.501 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.198 MHz processor.
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: Using configuration type 1
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> libata version 2.00 loaded.
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> ACPI: Getting cpuindex for acpiid 0x2
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>> e100: Copyright(c) 1999-2006 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>> ahci 0000:00:0f.0: version 2.0
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277
>> scsi0 : ahci
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 04(08)
>> ata1.00: qc timeout (cmd 0xec)
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: hardreset failed, retrying in 5 secs
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: hardreset failed, retrying in 5 secs
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: reset failed, giving up
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 08(08)
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: reset failed, giving up
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Fusion MPT base driver 3.04.02
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.02
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> Sending DHCP requests ., OK
>> IP-Config: Got DHCP answer from 85.158.176.245, my address is
>> 85.158.176.246
>> IP-Config: Complete:
>> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
>> gw=85.158.176.1,
>> host=85.158.176.246, domain=, nis-domain=(none),
>> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
>> Looking up port of RPC 100003/2 on 85.158.176.245
>> Looking up port of RPC 100005/1 on 85.158.176.245
>> VFS: Mounted root (nfs filesystem) readonly.
>> Freeing unused kernel memory: 264k freed
>>
>>
>>
>> 4.) complete output (2.6.19.2) (acpi=off does not work)
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> end_pfn_map = 1048576
>> DMI 2.3 present.
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> DMA32 4096 -> 1048576
>> Normal 1048576 -> 1048576
>> early_node_map[2] active PFN ranges
>> 0: 0 -> 159
>> 0: 256 -> 245680
>> On node 0 totalpages: 245583
>> DMA zone: 56 pages used for memmap
>> DMA zone: 1474 pages reserved
>> DMA zone: 2469 pages, LIFO batch:0
>> DMA32 zone: 3302 pages used for memmap
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages used for memmap
>> Intel MultiProcessor Specification v1.1
>> MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at:
>> 0xFEE00000
>> Processor #0 (Bootup-CPU)
>> I/O APIC #1 at 0xFEC00000.
>> I/O APIC #2 at 0xFECC0000.
>> Setting APIC routing to flat
>> Processors: 1
>> Nosave address range: 000000000009f000 - 00000000000a0000
>> Nosave address range: 00000000000a0000 - 00000000000e4000
>> Nosave address range: 00000000000e4000 - 0000000000100000
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> PERCPU: Allocating 36352 bytes of per cpu data
>> Built 1 zonelists. Total pages: 240751
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> acpi=off BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
>> 1474k data, 264k init)
>> Calibrating delay using timer specific routine.. 4818.82 BogoMIPS
>> (lpj=9637645)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 32k freed
>> Using local APIC timer interrupts.
>> result 12500751
>> Detected 12.500 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
>> time.c: Detected 2400.142 MHz processor.
>> NET: Registered protocol family 16
>> PCI: Using configuration type 1
>> ACPI: Interpreter disabled.
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI: disabled
>> SCSI subsystem initialized
>> libata version 2.00 loaded.
>> PCI: Probing PCI hardware
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> PCI: Using IRQ router default [1106/3287] at 0000:00:11.0
>> PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27
>> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
>> PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21
>> PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20
>> PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22
>> PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
>> PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23
>> PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23
>> PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>> PCI-DMA: Disabling IOMMU.
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>> e100: Copyright(c) 1999-2006 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>> ahci 0000:00:0f.0: version 2.0
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277
>> scsi0 : ahci
>> ata1: SATA link down (SStatus 601 SControl 300)
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 04(08)
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: reset failed, giving up
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Fusion MPT base driver 3.04.02
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.02
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
>> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> Sending DHCP requests ., OK
>> IP-Config: Got DHCP answer from 85.158.176.245, my address is
>> 85.158.176.246
>> IP-Config: Complete:
>> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
>> gw=85.158.176.1,
>> host=85.158.176.246, domain=, nis-domain=(none),
>> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
>> Looking up port of RPC 100003/2 on 85.158.176.245
>> Looking up port of RPC 100005/1 on 85.158.176.245
>> VFS: Mounted root (nfs filesystem) readonly.
>> Freeing unused kernel memory: 264k freed
>>
>>
>> Stefan
>>
>> Luming Yu schrieb:
>>> On 1/26/07, Stephen Evanchik <evanchsa@...il.com> wrote:
>>>> On 1/25/07, Luming Yu <luming.yu@...il.com> wrote:
>>>> > From the log:
>>>> > 2.6.18.3:
>>>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>>>> > 2.6.20-rc5:
>>>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ
>>>> 21"
>>>> >
>>>> > Sounds like acpi interrupt configure problem. Please try acpi=off
>>>> first.
>>>>
>>>>
>>>> Still does not recognize the SATA device (and the machine fails to
>>>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
>>>> evening. I am going to build a vanilla 2.6.18 and see if that still
>>>> works as I am currently running an FC5 kernel.
>>>>
>>> Is there any difference in dmesg with acpi=off?
>>> what is your sata driver?
>>
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Hi,
I have recognized the same problem with an ASUS A8V-X. The error first
occurred with the kernel version 2.6.19.X and with 2.6.20 I still have
the same problem (see dems output below).
I also tried different BIOS settings for the SATA controller: SATA and
AHCI, but none worked.
Could this be a problem with this specific board, the ASUS A8V series?
Manuel
Linux version 2.6.20 (root@...n44) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #6 SMP Thu Feb 8 16:09:39 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end:
000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end:
000000007ffd0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end:
000000007ffde000 type: 3
copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end:
0000000080000000 type: 4
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end:
00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end:
00000000fec01000 type: 2
copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 524240) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524240
early_node_map[1] active PFN ranges
0: 0 -> 524240
On node 0 totalpages: 524240
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 292561 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x000fa970
ACPI: XSDT (v001 A M I OEMXSDT 0x02000615 MSFT 0x00000097) @ 0x7ffd0100
ACPI: FADT (v003 A M I OEMFACP 0x02000615 MSFT 0x00000097) @ 0x7ffd0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000615 MSFT 0x00000097) @ 0x7ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x02000615 MSFT 0x00000097) @ 0x7ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x02000615 MSFT 0x00000097) @ 0x7ffde040
ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 2000.180 MHz processor.
Built 1 zonelists. Total pages: 520145
Kernel command line: root=/dev/sda1 ro apic=off
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074160k/2096960k available (2947k kernel code, 21576k reserved,
843k data, 224k init, 1179456k highmem)
virtual kernel memory layout:
fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04ba000 - 0xc04f2000 ( 224 kB)
.data : 0xc03e0ff5 - 0xc04b3f8c ( 843 kB)
.text : 0xc0100000 - 0xc03e0ff5 (2947 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.44 BogoMIPS
(lpj=8004891)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001
00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.47 BogoMIPS
(lpj=8000951)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001
00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Total of 2 processors activated (8002.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs:
CPU#0 had 237 usecs TSC skew, fixed it up.
CPU#1 had -237 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=238
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:0
PCI: No mmconfig possible on 0:1
PCI: No mmconfig possible on 0:f
PCI: No mmconfig possible on 0:10
PCI: No mmconfig possible on 0:11
PCI: No mmconfig possible on 0:13
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 1:0
PCI: No mmconfig possible on 5:c
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd800000-fe8fffff
PREFETCH window: f9700000-fd6fffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: c000-cfff
MEM window: fea00000-feafffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 16 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RTL8169s/8110s at 0xf8804c00, 00:11:6b:32:45:74, IRQ 16
pata_via 0000:00:0f.1: version 0.2.1
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
scsi0 : pata_via
ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.01: ata1: dev 1 multi count 16
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : pata_via
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1026 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg2 type 5
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 4-2.1: new low speed USB device using uhci_hcd and address 3
usb 4-2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:10.2-2.1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
input: PC Speaker as /class/input/input5
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09
09:56:17 2007 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
Starting balanced_irq
Using IPI Shortcut mode
Time: acpi_pm clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
ahci 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata3: SATA max UDMA/133 cmd 0xF8834D00 ctl 0x0 bmdma 0x0 irq 223
ata4: SATA max UDMA/133 cmd 0xF8834D80 ctl 0x0 bmdma 0x0 irq 223
ata5: SATA max UDMA/133 cmd 0xF8834E00 ctl 0x0 bmdma 0x0 irq 223
ata6: SATA max UDMA/133 cmd 0xF8834E80 ctl 0x0 bmdma 0x0 irq 223
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 00(08)
APIC error on CPU1: 00(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:01.0 to 64
EXT3 FS on sda1, internal journal
it87: Found IT8712F chip at 0xd00, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists