Linux version 2.6.19-1.2911.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 15:51:47 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffae000 (usable) BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 262062) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262062 early_node_map[1] active PFN ranges 0: 0 -> 262062 On node 0 totalpages: 262062 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32431 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d5061e ASL 0x00000061) @ 0x3fff0000 ACPI: FADT (v001 DELL CPi R 0x27d5061e ASL 0x00000061) @ 0x3fff0400 ACPI: ASF! (v016 DELL CPi R 0x27d5061e ASL 0x00000061) @ 0x3fff0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000) Detected 1998.429 MHz processor. Built 1 zonelists. Total pages: 260015 Kernel command line: ro root=LABEL=/ vga=0x305 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01829000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0806000 soft=c07e6000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032176k/1048248k available (2210k kernel code, 15352k reserved, 1131k data, 240k init, 130744k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc07a5000 - 0xc07e1000 ( 240 kB) .data : 0xc0628a27 - 0xc07438f4 (1131 kB) .text : 0xc0400000 - 0xc0628a27 (2210 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3998.18 BogoMIPS (lpj=1999091) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=144 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1376 bytes checking if image is initramfs... it is Freeing initrd memory: 1541k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x800-0x805 could not be reserved pnp: 00:02: ioport range 0x808-0x80f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x806-0x807 has been reserved pnp: 00:03: ioport range 0x810-0x85f could not be reserved pnp: 00:03: ioport range 0x860-0x87f has been reserved pnp: 00:03: ioport range 0x880-0x8bf has been reserved pnp: 00:03: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x900-0x97f has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fc000000-fdffffff PREFETCH window: d0000000-dfffffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 50000000-51ffffff MEM window: f6000000-f7ffffff PCI: Bus 7, cardbus bridge: 0000:02:01.1 IO window: 0000d800-0000d8ff IO window: 0000dc00-0000dcff PREFETCH window: 52000000-53ffffff MEM window: f8000000-f9ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-efff MEM window: f6000000-fbffffff PREFETCH window: 50000000-53ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1171638161.662:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key BE1C9570C411C444 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k vesafb: mode is 1024x768x8, linelength=1024, pages=3 vesafb: protected mode interface info at c000:e560 vesafb: pmi: set display start = c00ce596, set palette = c00ce600 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (56 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1f.6 disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Hitachi HTS721060G9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DVD+RW ND-6100A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:02:01.0 [1028:014e] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64 Yenta: ISA IRQ mask 0x04d8, PCI irq 11 Socket status: 30000410 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff cs: IO port probe 0xd000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff Yenta: CardBus bridge found at 0000:02:01.1 [1028:014e] Yenta: ISA IRQ mask 0x04d8, PCI irq 11 Socket status: 30000047 Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff cs: IO port probe 0xd000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 240k freed Time: acpi_pm clocksource has been installed. Write protecting the kernel read-only data: 415k input: AT Translated Set 2 keyboard as /class/input/input0 pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa1fffff 0xfae00000-0xfb3fffff pcmcia: registering new device pcmcia0.0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: PS/2 Mouse as /class/input/input1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected SCSI subsystem initialized libata version 2.00 loaded. device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com usb 4-6: new high speed USB device using ehci_hcd and address 3 usb 4-6: configuration #1 chosen from 1 choice hub 4-6:1.0: USB hub found hub 4-6:1.0: 4 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected usb 4-6.2: new high speed USB device using ehci_hcd and address 4 usb 4-6.2: configuration #1 chosen from 1 choice hub 4-6.2:1.0: USB hub found hub 4-6.2:1.0: 4 ports detected usb 4-6.4: new full speed USB device using ehci_hcd and address 5 usb 4-6.4: configuration #1 chosen from 1 choice usb 2-2.2: new full speed USB device using uhci_hcd and address 4 Initializing USB Mass Storage driver... usb 2-2.2: configuration #1 chosen from 1 choice input: Logitech Logitech BT Mini-Receiver as /class/input/input3 input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.2 usb 2-2.3: new full speed USB device using uhci_hcd and address 5 usb 2-2.3: configuration #1 chosen from 1 choice input: Logitech Logitech BT Mini-Receiver as /class/input/input4 input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.3 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1171638170.739:2): selinux=0 auid=4294967295 scsi 0:0:0:0: Direct-Access SONY USB-FDU 6.01 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: Attached scsi removable disk sda usb-storage: device scan complete hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 0.0: ttyS1 at I/O 0xd3f8 (irq = 3) is a 16450 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ieee1394: Initialized config rom entry `ip1394' ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation input: PC Speaker as /class/input/input5 bcm43xx driver ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 bcm43xx: Chip ID 0x4306, rev 0x3 bcm43xx: Number of cores: 5 bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006) iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fafef800-fafeffff] Max Packet=[2048] IR/IT contexts=[4/8] tg3.c:v3.69 (November 15, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 eth1: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:6c:ad:cd eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[763f0000] dma_mask[64-bit] sd 0:0:0:0: Attached scsi generic sg0 type 0 nvidia: module license 'NVIDIA' taints kernel. intel_rng: FWH not detected ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc00037a260c1] cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. intel8x0_measure_ac97_clock: measured 50427 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) floppy0: no floppy controllers found lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: ACPI Dock Station Driver ibm_acpi: ec object not found ACPI: Video Device [VID] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on hda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2048248k swap on /dev/hda6. Priority:-1 extents:1 across:2048248k NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028) PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001) PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106) ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P ) [] dump_trace+0x69/0x1b6 [] show_trace_log_lvl+0x18/0x2c [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] hid_output_report+0x23c/0x2e7 [] hid_submit_ctrl+0x4c/0x1d9 [] hid_submit_report+0x134/0x15f [] hiddev_ioctl+0x327/0x88a [] do_ioctl+0x4c/0x62 [] vfs_ioctl+0x24a/0x25c [] sys_ioctl+0x4c/0x66 [] syscall_call+0x7/0xb [<005b5402>] 0x5b5402 ======================= Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized usb 2-2.1: new full speed USB device using uhci_hcd and address 6 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized usb 2-2.1: configuration #1 chosen from 1 choice Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb Bluetooth: HIDP (Human Interface Emulation) ver 1.1 eth0: no IPv6 routers present agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode