lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20070220031951.56492DDD09@ozlabs.org>
Date:	Tue, 20 Feb 2007 14:19:51 +1100 (EST)
From:	David Gibson <david@...son.dropbear.id.au>
To:	Andrew Morton <akpm@...l.org>
CC:	<linux-kernel@...r.kernel.org>, <rmk@....linux.org.uk>,
	<linuxppc-dev@...abs.org>
Subject: [PATCH 1/2] Define FIXED_PORT flag for serial_core

At present, the serial core always allows setserial in userspace to
change the port address, irq and base clock of any serial port.  That
makes sense for legacy ISA ports, but not for (say) embedded ns16550
compatible serial ports at peculiar addresses.  In these cases, the
kernel code configuring the ports must know exactly where they are,
and their clocking arrangements (which can be unusual on embedded
boards).  It doesn't make sense for userspace to change these
settings.

Therefore, this patch defines a UPF_FIXED_PORT flag for the uart_port
structure.  If this flag is set when the serial port is configured,
any attempts to alter the port's type, io address, irq or base clock
with setserial are ignored.

In addition this patch uses the new flag for on-chip serial ports
probed in arch/powerpc/kernel/legacy_serial.c, and for other
hard-wired serial ports probed by drivers/serial/of_serial.c.

Signed-off-by: David Gibson <dwg@....ibm.com>
---

 arch/powerpc/kernel/legacy_serial.c |    3 ++-
 drivers/serial/of_serial.c          |    3 ++-
 drivers/serial/serial_core.c        |   22 +++++++++++++---------
 include/linux/serial_core.h         |    1 +
 4 files changed, 18 insertions(+), 11 deletions(-)

Index: working-2.6/drivers/serial/serial_core.c
===================================================================
--- working-2.6.orig/drivers/serial/serial_core.c	2007-02-19 11:05:32.000000000 +1100
+++ working-2.6/drivers/serial/serial_core.c	2007-02-20 11:38:08.000000000 +1100
@@ -672,19 +672,21 @@ static int uart_set_info(struct uart_sta
 	 */
 	mutex_lock(&state->mutex);
 
-	change_irq  = new_serial.irq != port->irq;
+	change_irq  = !(port->flags & UPF_FIXED_PORT)
+		&& new_serial.irq != port->irq;
 
 	/*
 	 * Since changing the 'type' of the port changes its resource
 	 * allocations, we should treat type changes the same as
 	 * IO port changes.
 	 */
-	change_port = new_port != port->iobase ||
-		      (unsigned long)new_serial.iomem_base != port->mapbase ||
-		      new_serial.hub6 != port->hub6 ||
-		      new_serial.io_type != port->iotype ||
-		      new_serial.iomem_reg_shift != port->regshift ||
-		      new_serial.type != port->type;
+	change_port = !(port->flags & UPF_FIXED_PORT)
+		&& (new_port != port->iobase ||
+		    (unsigned long)new_serial.iomem_base != port->mapbase ||
+		    new_serial.hub6 != port->hub6 ||
+		    new_serial.io_type != port->iotype ||
+		    new_serial.iomem_reg_shift != port->regshift ||
+		    new_serial.type != port->type);
 
 	old_flags = port->flags;
 	new_flags = new_serial.flags;
@@ -796,8 +798,10 @@ static int uart_set_info(struct uart_sta
 		}
 	}
 
-	port->irq              = new_serial.irq;
-	port->uartclk          = new_serial.baud_base * 16;
+	if (change_irq)
+		port->irq      = new_serial.irq;
+	if (! (port->flags & UPF_FIXED_PORT))
+		port->uartclk  = new_serial.baud_base * 16;
 	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
 	port->custom_divisor   = new_serial.custom_divisor;
Index: working-2.6/include/linux/serial_core.h
===================================================================
--- working-2.6.orig/include/linux/serial_core.h	2007-02-19 11:05:32.000000000 +1100
+++ working-2.6/include/linux/serial_core.h	2007-02-20 11:38:08.000000000 +1100
@@ -260,6 +260,7 @@ struct uart_port {
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
 #define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
+#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
 #define UPF_DEAD		((__force upf_t) (1 << 30))
 #define UPF_IOREMAP		((__force upf_t) (1 << 31))
 
Index: working-2.6/arch/powerpc/kernel/legacy_serial.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/legacy_serial.c	2007-02-15 10:05:18.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/legacy_serial.c	2007-02-20 10:50:16.000000000 +1100
@@ -115,7 +115,8 @@ static int __init add_legacy_soc_port(st
 {
 	u64 addr;
 	const u32 *addrp;
-	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
+		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
Index: working-2.6/drivers/serial/of_serial.c
===================================================================
--- working-2.6.orig/drivers/serial/of_serial.c	2007-02-20 11:38:16.000000000 +1100
+++ working-2.6/drivers/serial/of_serial.c	2007-02-20 11:38:30.000000000 +1100
@@ -48,7 +48,8 @@ static int __devinit of_platform_serial_
 	port->iotype = UPIO_MEM;
 	port->type = type;
 	port->uartclk = *clk;
-	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
+		| UPF_FIXED_PORT;
 	port->dev = &ofdev->dev;
 	port->custom_divisor = *clk / (16 * (*spd));
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ