Linux version 2.6.19-1.2895.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:50:56 EST 2007 Command line: ro root=LABEL=/ BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df938000 (usable) BIOS-e820: 00000000df938000 - 00000000df9d2000 (ACPI NVS) BIOS-e820: 00000000df9d2000 - 00000000dfa42000 (usable) BIOS-e820: 00000000dfa42000 - 00000000dfa9a000 (reserved) BIOS-e820: 00000000dfa9a000 - 00000000dfab8000 (usable) BIOS-e820: 00000000dfab8000 - 00000000dfb1a000 (ACPI NVS) BIOS-e820: 00000000dfb1a000 - 00000000dfb2c000 (usable) BIOS-e820: 00000000dfb2c000 - 00000000dfb3a000 (ACPI data) BIOS-e820: 00000000dfb3a000 - 00000000dfc00000 (usable) BIOS-e820: 00000000ffc00000 - 00000000ffc0c000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 915768) 1 entries of 3200 used Entering add_active_range(0, 915922, 916034) 2 entries of 3200 used Entering add_active_range(0, 916122, 916152) 3 entries of 3200 used Entering add_active_range(0, 916250, 916268) 4 entries of 3200 used Entering add_active_range(0, 916282, 916480) 5 entries of 3200 used Entering add_active_range(0, 1048576, 1179648) 6 entries of 3200 used end_pfn_map = 1179648 DMI 2.4 present. ACPI: RSDP (v002 INTEL ) @ 0x00000000000f0350 ACPI: XSDT (v001 INTEL S5000VSA 0x00000000 INTL 0x01000013) @ 0x00000000dfb39120 ACPI: FADT (v003 INTEL S5000VSA 0x00000000 INTL 0x01000013) @ 0x00000000dfb36000 ACPI: MADT (v001 INTEL S5000VSA 0x00000000 INTL 0x01000013) @ 0x00000000dfb35000 ACPI: SPCR (v001 INTEL S5000VSA 0x00000000 INTL 0x01000013) @ 0x00000000dfb2f000 ACPI: HPET (v001 INTEL S5000VSA 0x00000001 INTL 0x01000013) @ 0x00000000dfb2e000 ACPI: MCFG (v001 INTEL S5000VSA 0x00000001 INTL 0x01000013) @ 0x00000000dfb2d000 ACPI: SSDT (v002 INTEL S5000VSA 0x00004000 INTL 0x01000013) @ 0x00000000dfb2c000 ACPI: DSDT (v002 INTEL S5000VSA 0x00000008 INTL 0x01000013) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-0000000120000000 Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 915768) 1 entries of 3200 used Entering add_active_range(0, 915922, 916034) 2 entries of 3200 used Entering add_active_range(0, 916122, 916152) 3 entries of 3200 used Entering add_active_range(0, 916250, 916268) 4 entries of 3200 used Entering add_active_range(0, 916282, 916480) 5 entries of 3200 used Entering add_active_range(0, 1048576, 1179648) 6 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000120000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1179648 early_node_map[7] active PFN ranges 0: 0 -> 158 0: 256 -> 915768 0: 915922 -> 916034 0: 916122 -> 916152 0: 916250 -> 916268 0: 916282 -> 916480 0: 1048576 -> 1179648 On node 0 totalpages: 1047100 DMA zone: 64 pages used for memmap DMA zone: 1450 pages reserved DMA zone: 2484 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 895710 pages, LIFO batch:31 Normal zone: 2048 pages used for memmap Normal zone: 129024 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009e000 - 000000000009f000 Nosave address range: 000000000009f000 - 0000000000100000 Nosave address range: 00000000df938000 - 00000000df9d2000 Nosave address range: 00000000dfa42000 - 00000000dfa9a000 Nosave address range: 00000000dfab8000 - 00000000dfb1a000 Nosave address range: 00000000dfb2c000 - 00000000dfb3a000 Nosave address range: 00000000dfc00000 - 00000000ffc00000 Nosave address range: 00000000ffc00000 - 00000000ffc0c000 Nosave address range: 00000000ffc0c000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: dfc00000:20000000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 43264 bytes of per cpu data Built 1 zonelists. Total pages: 1027218 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x5ed3000 - 0x9ed3000 Memory: 4032812k/4718592k available (2468k kernel code, 155588k reserved, 1934k data, 312k init) Calibrating delay using timer specific routine.. 5324.82 BogoMIPS (lpj=2662412) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 10390972 Detected 10.390 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 5320.06 BogoMIPS (lpj=2660030) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 1/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.66GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5320.20 BogoMIPS (lpj=2660104) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.66GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 5320.16 BogoMIPS (lpj=2660081) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 3/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.66GHz stepping 04 Brought up 4 CPUs time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2660.103 MHz processor. sizeof(vma)=176 bytes sizeof(page)=64 bytes sizeof(inode)=720 bytes sizeof(dentry)=224 bytes sizeof(ext3inode)=968 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=240 bytes sizeof(task_struct)=1904 bytes migration_cost=10,684 checking if image is initramfs... it is Freeing initrd memory: 3111k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:09:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f could not be reserved pnp: 00:06: ioport range 0x800-0x87f could not be reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: f8000000-f88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-2fff MEM window: f8000000-f88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-2fff MEM window: f8000000-f89fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: f8a00000-f8afffff PREFETCH window: f0000000-f7ffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:01.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1170381966.095:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 3990ACCD31A7D65A - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:01:00.0 to 64 Allocate Port Service[0000:01:00.0:pcie10] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie20] PCI: Setting latency timer of device 0000:02:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:01.0:pcie20] PCI: Setting latency timer of device 0000:02:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:02.0:pcie20] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 20 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30c0-0x30c7, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 493k input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00003080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 23, io base 0x00003060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8b00400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit stag led pmp ata1: SATA max UDMA/133 cmd 0xFFFFC2000001A100 ctl 0x0 bmdma 0x0 irq 20 ata2: SATA max UDMA/133 cmd 0xFFFFC2000001A180 ctl 0x0 bmdma 0x0 irq 20 ata3: SATA max UDMA/133 cmd 0xFFFFC2000001A200 ctl 0x0 bmdma 0x0 irq 20 ata4: SATA max UDMA/133 cmd 0xFFFFC2000001A280 ctl 0x0 bmdma 0x0 irq 20 ata5: SATA max UDMA/133 cmd 0xFFFFC2000001A300 ctl 0x0 bmdma 0x0 irq 20 ata6: SATA max UDMA/133 cmd 0xFFFFC2000001A380 ctl 0x0 bmdma 0x0 irq 20 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 ata2.00: ata2: dev 0 multi count 0 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for UDMA/133 scsi3 : ahci ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 ata4.00: ata4: dev 0 multi count 0 ata4.00: configured for UDMA/133 scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST380211AS 3.AA PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y250M0 YAR5 PQ: 0 ANSI: 5 SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y250M0 YAR5 PQ: 0 ANSI: 5 SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sd 2:0:0:0: Attached scsi disk sdc scsi 3:0:0:0: Direct-Access ATA Maxtor 6Y250M0 YAR5 PQ: 0 ANSI: 5 SCSI device sdd: 490234752 512-byte hdwr sectors (251000 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 490234752 512-byte hdwr sectors (251000 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sd 3:0:0:0: Attached scsi disk sdd kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1170381981.491:2): selinux=0 auid=4294967295 Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:15:17:02:8d:2c intel_rng: FWH not detected e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.1 to 64 e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:15:17:02:8d:2d e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: PC Speaker as /class/input/input2 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 20 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 floppy0: no floppy controllers found lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sdb1: found reiserfs format "3.6" with standard journal ReiserFS: sdb1: using ordered data mode ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb1: checking transaction log (sdb1) ReiserFS: sdb1: Using r5 hash to sort names ReiserFS: sdb2: found reiserfs format "3.6" with standard journal ReiserFS: sdb2: using ordered data mode ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb2: checking transaction log (sdb2) ReiserFS: sdb2: Using r5 hash to sort names ReiserFS: sdc1: found reiserfs format "3.6" with standard journal ReiserFS: sdc1: using ordered data mode ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdc1: checking transaction log (sdc1) ReiserFS: sdc1: Using r5 hash to sort names ReiserFS: sdc2: found reiserfs format "3.6" with standard journal ReiserFS: sdc2: using ordered data mode ReiserFS: sdc2: journal params: device sdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdc2: checking transaction log (sdc2) ReiserFS: sdc2: Using r5 hash to sort names ReiserFS: sdd1: found reiserfs format "3.6" with standard journal ReiserFS: sdd1: using ordered data mode ReiserFS: sdd1: journal params: device sdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdd1: checking transaction log (sdd1) ReiserFS: sdd1: Using r5 hash to sort names ReiserFS: sdd2: found reiserfs format "3.6" with standard journal ReiserFS: sdd2: using ordered data mode ReiserFS: sdd2: journal params: device sdd2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdd2: checking transaction log (sdd2) ReiserFS: sdd2: Using r5 hash to sort names Adding 8385920k swap on /dev/sda2. Priority:-1 extents:1 across:8385920k