| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1172299914.4109.47.camel@daplas>
Date: Sat, 24 Feb 2007 14:51:53 +0800
From: "Antonino A. Daplas" <adaplas@...il.com>
To: linux-fbdev-devel@...ts.sourceforge.net,
Jaya Kumar <jayakumar.lkml@...il.com>
Cc: linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: Re: [Linux-fbdev-devel] [RFC 2.6.20 1/1] fbdev, mm: Deferred IO
and hecubafb driver
On Fri, 2007-02-23 at 07:32 +0100, Jaya Kumar wrote:
> Hi Tony, Paul, Peter, fbdev, lkml, and mm,
>
> This is a first pass at abstracting deferred IO out from hecubafb and
> into fbdev as was discussed before:
> http://marc.theaimsgroup.com/?l=linux-fbdev-devel&m=117187443327466&w=2
>
> Please let me know your feedback and if it looks okay so far.
>
Can you create 2 separate patches, one for the deferred_io and another
for the driver that uses it?
> +Another one may be if one has a device framebuffer that is in an usual format,
> +say diagonally shifting RGB, this may then be a mechanism for you to allow
> +apps to pretend to have a normal framebuffer but reswizzle for the device
> +framebuffer at vsync time based on the touched pagelist.
Hmm, yes, it can be used to implement a shadow framebuffer :-)
> +
> +How to use it: (for applications)
> +---------------------------------
> +No changes needed. mmap the framebuffer like normal and just use it.
> +
> +How to use it: (for fbdev drivers)
> +----------------------------------
> +The following example may be helpful.
> +
> +1. Setup your mmap and vm_ops structures. Eg:
> +
> +
> +The delay is the minimum delay between when the page_mkwrite trigger occurs
> +and when the deferred_io callback is called. The deferred_io callback is
> +explained below.
> +
> +static struct vm_operations_struct hecubafb_vm_ops = {
> + .nopage = hecubafb_vm_nopage,
> + .page_mkwrite = fb_deferred_io_mkwrite,
> +};
> +
It would seem to me that the above can be made generic, so we have this
instead:
static struct vm_operations_struct fb_deferred_vm_ops = {
.nopage = fb_deferred_io_vm_nopage,
.page_mkwrite = fb_deferred_io_mkwrite,
};
> +You will need a nopage routine to find and retrive the struct page for your
> +framebuffer pages. You must set page_mkwrite to fb_deferred_io_mkwrite.
> +Here's the example nopage for hecubafb where it is a vmalloced framebuffer.
> +
> +static int hecubafb_mmap(struct fb_info *info, struct vm_area_struct *vma)
> +{
> + vma->vm_ops = &hecubafb_vm_ops;
> + vma->vm_flags |= ( VM_IO | VM_RESERVED | VM_DONTEXPAND );
> + vma->vm_private_data = info;
> + return 0;
> +}
And this too as fb_deferred_io_mmap.
> +
> +static struct page* hecubafb_vm_nopage(struct vm_area_struct *vma,
> + unsigned long vaddr, int *type)
> +{
> + unsigned long offset;
> + struct page *page;
> + struct fb_info *info = vma->vm_private_data;
> +
> + offset = (vaddr - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
> + if (offset >= (DPY_W*DPY_H)/8)
> + return NOPAGE_SIGBUS;
> +
To make it generic, this can simply be:
if (offset >= info->fix.smem_len)
return NOPAGE_SIGBUS.
> + page = vmalloc_to_page(info->screen_base + offset);
> + if (!page)
> + return NOPAGE_OOM;
> +
> + get_page(page);
> + if (type)
> + *type = VM_FAULT_MINOR;
> + return page;
> +}
> +
>
> +static struct fb_deferred_io hecubafb_defio = {
> + .delay = HZ,
> + .deferred_io = hecubafb_dpy_deferred_io,
> +};
Leaving the drivers to just fill up the above. This would result in a
decrease of code duplication and it will be easier for driver writers.
> diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
> index 2822526..863126a 100644
> --- a/drivers/video/fbmem.c
> +++ b/drivers/video/fbmem.c
> @@ -1325,6 +1325,7 @@ register_framebuffer(struct fb_info *fb_info)
>
> event.info = fb_info;
> fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
> + fb_deferred_io_init(fb_info);
> return 0;
> }
>
> @@ -1355,6 +1356,7 @@ unregister_framebuffer(struct fb_info *fb_info)
> fb_destroy_modelist(&fb_info->modelist);
> registered_fb[i]=NULL;
> num_registered_fb--;
> + fb_deferred_io_cleanup(fb_info);
> fb_cleanup_device(fb_info);
> device_destroy(fb_class, MKDEV(FB_MAJOR, i));
> event.info = fb_info;
I would prefer to have the init and cleanup functions called by the
driver themselves, instead of piggy-backing them to the
framebuffer_register/unregister.
> +static void hecubafb_dpy_update(struct hecubafb_par *par)
> +{
> + int i;
> + unsigned char *buf = par->info->screen_base;
> +
> + apollo_send_command(par, 0xA0);
> +
> + for (i=0; i < (DPY_W*DPY_H/8); i++) {
> + apollo_send_data(par, *(buf++));
> + }
> +
This basically dumps the entire framebuffer to the hardware, doesn't it?
This framebuffer has only 2 pages at the most, so it doesn't matter. But
for hardware with MB's of RAM, I don't think this is feasible.
Is there a way to selectively update only the touched pages, ie from the
fbdevio->pagelist? struct page has a field (pgoff_t index), is this
usable? If not, can we just create a bit array, just to tell the driver
which are the dirty pages?
Tony
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists