linux-kernel - D-Link DGE-528T (r8159) autonegotation of 1000 Mbps link does not work

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <Pine.LNX.4.64.0702242214120.1830@qfy-uxvtj8-sro4so00-137.qupc.varg.sv>
Date:	Sun, 25 Feb 2007 15:56:30 +0200 (EET)
From:	"Petri T. Koistinen" <petri.koistinen@....fi>
To:	netdev@...r.kernel.org
cc:	ShuChen <shuchen@...ltek.com.tw>, linux-kernel@...r.kernel.org
Subject: D-Link DGE-528T (r8159) autonegotation of 1000 Mbps link does not
 work

Hi!

I just brought two D-Link DGE-528T (uses r8159 driver) network adapters
to have nice 1 Gbps home network between two computers.

I have gigabit crossover cable that is connected like this

Pin  Connector #1  Connector #2
1    white/orange  white/green
2    orange        green
3    white/green   white/orange
4    blue          white/brown
5    white/blue    brown
6    green         orange
7    white/brown   blue
8    brown         white/blue
(from: http://logout.sh/computers/net/gigabit/)

and when I use this cable I only get 10 Mbps connection when connected
another D-Link DGE-528T.

However if I connect other end of cable to Intel EtherExpress 100 Mbps
card, I get 100 Mbps connection auto-negotiated OK.

I can however force gigabit link on both D-Link DGE-528T using

	insmod ./r8169.ko media=0x10

command. And I get about 15 MiB/s transfer speed when testing
with netcat and pmr[1] (without NAPI). Which I count as some kind of
sucky gigabit connection.

Few questions for you:

Do anyone know if there some known bug in auto-negotiation with
Realtek 8159 chip? (Or is that just wrong cable?)

Can I force 1000 Mbps link on some other way than giving option to
insmod? Using /proc or something?

What kind of transfer speed you have reached with these cards? That
15 MiB/s is not what I expected.

Thanks!

Best regards,
Petri Koistinen

[1]
Test setup:
Server: nc -l -p 2000 </dev/zero
Client: nc 192.168.1.1 2000 | pmr >/dev/null

pmr (ex. pipemeter) is a command line filter that measures
bandwidth going through the pipe:
http://zakalwe.fi/~shd/foss/pmr/pmr-0.12.tar.bz2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/