Linux version 2.6.19-1.2911.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 15:51:47 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) BIOS-e820: 000000003fe90000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5c80 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 261776) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261776 early_node_map[1] active PFN ranges 0: 0 -> 261776 On node 0 totalpages: 261776 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 253 pages used for memmap HighMem zone: 32147 pages, LIFO batch:7 DMI present. Using APIC driver default ACPI: RSDP (v000 PTLTD ) @ 0x000f5ae0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fe95118 ACPI: FADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe9ddee ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe9de62 ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe9deca ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe9df02 ACPI: TCPA (v001 PTLTD CALISTGA 0x06040000 PTL 0x00000001) @ 0x3fe9df3e ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fe9df70 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fe9dfd8 ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x3fe96862 ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x3fe961d0 ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x3fe956f8 ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x3fe95652 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3fe9516c ACPI: DSDT (v001 INTEL CALISTGA 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec28000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 255, address 0xfec28000, GSI 24-279 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1596.182 MHz processor. Built 1 zonelists. Total pages: 259731 Kernel command line: ro root=LABEL=/ rhgb quiet combined_mode=libata pci=assign-busses mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec28000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0806000 soft=c07e6000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030900k/1047104k available (2210k kernel code, 15428k reserved, 1131k data, 240k init, 129600k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc07a5000 - 0xc07e1000 ( 240 kB) .data : 0xc0628a27 - 0xc07438f4 (1131 kB) .text : 0xc0400000 - 0xc0628a27 (2210 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 3195.97 BogoMIPS (lpj=1597985) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0807000 soft=c07e7000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3192.42 BogoMIPS (lpj=1596213) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 Total of 2 processors activated (6388.39 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=144 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1376 bytes migration_cost=53 checking if image is initramfs... it is Freeing initrd memory: 1527k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:07: ioport range 0x6a0-0x6af has been reserved pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d0000000-d1ffffff PREFETCH window: b0000000-bfffffff PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: c8000000-c9ffffff PREFETCH window: c0000000-c1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: ca000000-cbffffff PREFETCH window: c2000000-c3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: cc000000-cdffffff PREFETCH window: c4000000-c5ffffff PCI: Bridge: 0000:00:1c.3 IO window: 5000-5fff MEM window: ce000000-cfffffff PREFETCH window: c6000000-c7ffffff PCI: Bus 7, cardbus bridge: 0000:06:06.0 IO window: 00006000-000060ff IO window: 00006400-000064ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: d2000000-d20fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0104 -> 0107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 20 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1172704776.193:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key BE1C9570C411C444 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [TZS0] (42 C) ACPI: Thermal Zone [TZS1] (50 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:06:06.0 [1025:0107] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff cs: IO port probe 0x6000-0x6fff: clean. pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 415k Time: hpet clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd2304000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 234441648 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x177 scsi 0:0:0:0: Direct-Access ATA ST9120821A 3.06 PQ: 0 ANSI: 5 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: CD-ROM PHILIPS DVD-RAM SDVD8821 EX02 PQ: 0 ANSI: 5 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1604 types, 174 bools, 1 sens, 1024 cats security: 59 classes, 50459 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1172704787.291:2): policy loaded auid=4294967295 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected intel_rng: FWH not detected ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ACPI: PCI Interrupt 0000:06:06.2[A] -> GSI 22 (level, low) -> IRQ 20 ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Attached scsi generic sg1 type 5 input: PC Speaker as /class/input/input3 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:06:06.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 20 mmc0: SDHCI at 0xd2005800 irq 20 PIO r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: RTL8168b/8111b at 0xf89d8000, 00:16:d3:4a:34:66, IRQ 16 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ibm_acpi: ec object not found ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda8, type ext3), uses xattr SELinux: initialized (dev sda2, type vfat), uses genfs_contexts SELinux: initialized (dev sda3, type vfat), uses genfs_contexts Adding 2249060k swap on /dev/sda7. Priority:-1 extents:1 across:2249060k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts audit(1172701213.230:3): avc: denied { dac_override } for pid=1951 comm="ip6tables-resto" capability=1 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:system_r:iptables_t:s0 tclass=capability audit(1172701213.230:4): avc: denied { read } for pid=1951 comm="ip6tables-resto" name="ip6tables" dev=sda6 ino=1798830 scontext=system_u:system_r:iptables_t:s0 tcontext=user_u:object_r:user_home_t:s0 tclass=file audit(1172701213.230:5): avc: denied { getattr } for pid=1951 comm="ip6tables-resto" name="ip6tables" dev=sda6 ino=1798830 scontext=system_u:system_r:iptables_t:s0 tcontext=user_u:object_r:user_home_t:s0 tclass=file ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8180 buckets, 65440 max) - 232 bytes per conntrack process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts ACPI: PCI interrupt for device 0000:04:00.0 disabled ieee80211_crypt: unregistered algorithm 'NULL' ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts ieee80211_crypt: registered algorithm 'WEP' eth1: no IPv6 routers present