| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.0703101717140.28739@CPE00045a9c397f-CM001225dbafb6>
Date: Sat, 10 Mar 2007 17:18:31 -0500 (EST)
From: "Robert P. J. Day" <rpjday@...dspring.com>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
cc: Andrew Morton <akpm@...l.org>, starvik@...s.com
Subject: [PATCH] CRIS: Delete unused header file.
Delete apparently unused header file drivers/serial/crisv10.h.
Signed-off-by: Robert P. J. Day <rpjday@...dspring.com>
---
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
deleted file mode 100644
index 4a23340..0000000
--- a/drivers/serial/crisv10.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * serial.h: Arch-dep definitions for the Etrax100 serial driver.
- *
- * Copyright (C) 1998, 1999, 2000 Axis Communications AB
- */
-
-#ifndef _ETRAX_SERIAL_H
-#define _ETRAX_SERIAL_H
-
-#include <linux/circ_buf.h>
-#include <asm/termios.h>
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-#define SERIAL_RECV_DESCRIPTORS 8
-
-struct etrax_recv_buffer {
- struct etrax_recv_buffer *next;
- unsigned short length;
- unsigned char error;
- unsigned char pad;
-
- unsigned char buffer[0];
-};
-
-struct e100_serial {
- int baud;
- volatile u8 *port; /* R_SERIALx_CTRL */
- u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */
-
- /* Output registers */
- volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
- volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */
- volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */
- const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */
-
- /* Input registers */
- volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
- volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */
- volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */
- volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */
-
- int flags; /* defined in tty.h */
-
- u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
- u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
- u8 iseteop; /* bit number for R_SET_EOP for the input dma */
- int enabled; /* Set to 1 if the port is enabled in HW config */
-
- u8 dma_out_enabled:1; /* Set to 1 if DMA should be used */
- u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
-
- /* end of fields defined in rs_table[] in .c-file */
- u8 uses_dma_in; /* Set to 1 if DMA is used */
- u8 uses_dma_out; /* Set to 1 if DMA is used */
- u8 forced_eop; /* a fifo eop has been forced */
- int baud_base; /* For special baudrates */
- int custom_divisor; /* For special baudrates */
- struct etrax_dma_descr tr_descr;
- struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS];
- int cur_rec_descr;
-
- volatile int tr_running; /* 1 if output is running */
-
- struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int x_char; /* xon/xoff character */
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- unsigned long last_active;
- int line;
- int type; /* PORT_ETRAX */
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- struct circ_buf xmit;
- struct etrax_recv_buffer *first_recv_buffer;
- struct etrax_recv_buffer *last_recv_buffer;
- unsigned int recv_cnt;
- unsigned int max_recv_cnt;
-
- struct work_struct work;
- struct async_icount icount; /* error-statistics etc.*/
- struct ktermios normal_termios;
- struct ktermios callout_termios;
-#ifdef DECLARE_WAITQUEUE
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-#else
- struct wait_queue *open_wait;
- struct wait_queue *close_wait;
-#endif
-
- unsigned long char_time_usec; /* The time for 1 char, in usecs */
- unsigned long flush_time_usec; /* How often we should flush */
- unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */
- unsigned long last_tx_active; /* Last tx time in jiffies */
- unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */
- unsigned long last_rx_active; /* Last rx time in jiffies */
-
- int break_detected_cnt;
- int errorcode;
-
-#ifdef CONFIG_ETRAX_RS485
- struct rs485_control rs485; /* RS-485 support */
-#endif
-};
-
-/* this PORT is not in the standard serial.h. it's not actually used for
- * anything since we only have one type of async serial-port anyway in this
- * system.
- */
-
-#define PORT_ETRAX 1
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP 0
-
-#endif /* __KERNEL__ */
-
-#endif /* !_ETRAX_SERIAL_H */
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists