| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200703140303.36456.kernel@kolivas.org>
Date: Wed, 14 Mar 2007 03:03:36 +1100
From: Con Kolivas <kernel@...ivas.org>
To: Al Boldi <a1426z@...ab.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Ingo Molnar <mingo@...e.hu>, ck list <ck@....kolivas.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH] [RSDL-0.30] sched: rsdl improve latencies with differential nice -1
On Wednesday 14 March 2007 02:31, Con Kolivas wrote:
> On Monday 12 March 2007 22:26, Al Boldi wrote:
> > I think, it should be possible to spread this max expiration latency
> > across the rotation, should it not?
>
> Can you try the attached patch please Al and Mike? It "dithers" the
> priority bitmap which tends to fluctuate the latency a lot more but in a
> cyclical fashion. This tends to make the max latency bound to a smaller
> value and should make it possible to run -nice tasks without killing the
> latency of the non niced tasks. Eg you could possibly run X nice -10 at a
> guess like we used to in 2.4 days. It's not essential of course, but is a
> workaround for Mike's testcase.
Oops, one tiny fix. This is a respin of the patch, sorry.
---
Modify the priority bitmaps of different nice levels to be dithered
minimising the latency likely when different nice levels are used. This
allows low cpu using relatively niced tasks to still get low latency in the
presence of less niced tasks.
Fix the accounting on -nice levels to not be scaled by HZ.
Signed-off-by: Con Kolivas <kernel@...ivas.org>
---
kernel/sched.c | 73 ++++++++++++++++++++++++++++++++++++---------------------
1 file changed, 47 insertions(+), 26 deletions(-)
Index: linux-2.6.21-rc3-mm2/kernel/sched.c
===================================================================
--- linux-2.6.21-rc3-mm2.orig/kernel/sched.c 2007-03-13 23:17:29.000000000 +1100
+++ linux-2.6.21-rc3-mm2/kernel/sched.c 2007-03-14 03:01:58.000000000 +1100
@@ -89,24 +89,34 @@ unsigned long long __attribute__((weak))
#define SCHED_PRIO(p) ((p)+MAX_RT_PRIO)
#define MAX_DYN_PRIO (MAX_PRIO + PRIO_RANGE)
-/*
- * Preemption needs to take into account that a low priority task can be
- * at a higher prio due to list merging. Its priority is artificially
- * elevated and it should be preempted if anything higher priority wakes up
- * provided it is not a realtime comparison.
- */
-#define TASK_PREEMPTS_CURR(p, curr) \
- (((p)->prio < (curr)->prio) || (!rt_task(p) && \
- ((p)->static_prio < (curr)->static_prio && \
- ((curr)->static_prio > (curr)->prio))))
+#define TASK_PREEMPTS_CURR(p, curr) ((p)->prio < (curr)->prio)
/*
* This is the time all tasks within the same priority round robin.
* Set to a minimum of 6ms.
*/
-#define RR_INTERVAL ((6 * HZ / 1001) + 1)
+#define __RR_INTERVAL 6
+#define RR_INTERVAL ((__RR_INTERVAL * HZ / 1001) + 1)
#define DEF_TIMESLICE (RR_INTERVAL * 20)
+/*
+ * This contains a bitmap for each dynamic priority level with empty slots
+ * for the valid priorities each different nice level can have. It allows
+ * us to stagger the slots where differing priorities run in a way that
+ * keeps latency differences between different nice levels at a minimum.
+ * ie, where 0 means a slot for that priority, priority running from left to
+ * right:
+ * nice -20 0000000000000000000000000000000000000000
+ * nice -10 1001000100100010001001000100010010001000
+ * nice 0 1010101010101010101010101010101010101010
+ * nice 5 1101011010110101101011010110101101011011
+ * nice 10 1101110110111011101101110111011011101110
+ * nice 15 1111101111110111111011111011111101111110
+ * nice 19 1111111111111111111011111111111111111111
+ */
+static unsigned long prio_matrix[PRIO_RANGE][BITS_TO_LONGS(PRIO_RANGE)]
+ __read_mostly;
+
#ifdef CONFIG_SMP
/*
* Divide a load by a sched group cpu_power : (load / sg->__cpu_power)
@@ -649,15 +659,6 @@ static inline int task_queued(struct tas
static inline void set_task_entitlement(struct task_struct *p)
{
__set_bit(USER_PRIO(p->prio), p->bitmap);
-
- /*
- * In the case this task has been part of a merged list that has
- * made it to higher priority than it should be, we remove the
- * quota from its own priority since it will get a quota at this
- * priority.
- */
- if (p->normal_prio < p->static_prio)
- __set_bit(USER_PRIO(p->static_prio), p->bitmap);
p->time_slice = p->quota;
}
@@ -705,7 +706,8 @@ static void dequeue_task(struct task_str
*/
static inline void task_new_array(struct task_struct *p, struct rq *rq)
{
- bitmap_zero(p->bitmap, PRIO_RANGE);
+ bitmap_copy(p->bitmap, prio_matrix[USER_PRIO(p->static_prio)],
+ PRIO_RANGE);
p->rotation = rq->prio_rotation;
}
@@ -746,7 +748,7 @@ static void recalc_task_prio(struct task
task_new_array(p, rq);
} else
task_new_array(p, rq);
- search_prio = p->static_prio;
+ search_prio = MAX_RT_PRIO;
/*
* SCHED_BATCH tasks never start at better priority than any other
@@ -755,7 +757,7 @@ static void recalc_task_prio(struct task
* non SCHED_BATCH tasks of the same nice level.
*/
if (unlikely(p->policy == SCHED_BATCH))
- search_prio = max(p->static_prio, rq->prio_level);
+ search_prio = rq->prio_level;
queue_prio = SCHED_PRIO(find_next_zero_bit(p->bitmap, PRIO_RANGE,
USER_PRIO(search_prio)));
if (queue_prio == MAX_PRIO) {
@@ -833,11 +835,12 @@ static void requeue_task(struct task_str
*/
static inline unsigned int task_timeslice(struct task_struct *p)
{
- unsigned int slice, rr;
+ unsigned int slice;
- slice = rr = p->quota;
+ slice = p->quota;
if (likely(!rt_task(p)))
- slice += (PRIO_RANGE - 1 - TASK_USER_PRIO(p)) * rr;
+ slice += (PRIO_RANGE - 1 - TASK_USER_PRIO(p)) *
+ __RR_INTERVAL / HZ;
return slice;
}
@@ -7066,6 +7069,24 @@ void __init sched_init(void)
int i, j, k;
int highest_cpu = 0;
+ for (i = 0; i < PRIO_RANGE; i++) {
+ if (i < 20) {
+ bitmap_zero(prio_matrix[i] , PRIO_RANGE);
+ j = PRIO_RANGE * PRIO_RANGE / (i + 1);
+ for (k = j; k < PRIO_RANGE * PRIO_RANGE; k += j)
+ __set_bit(k / PRIO_RANGE, prio_matrix[i]);
+ } else if (i == 20) {
+ bitmap_fill(prio_matrix[i], PRIO_RANGE);
+ for (k = 1; k < PRIO_RANGE; k += 2)
+ __clear_bit(k, prio_matrix[i]);
+ } else {
+ bitmap_fill(prio_matrix[i], PRIO_RANGE);
+ j = PRIO_RANGE * PRIO_RANGE / (PRIO_RANGE - i + 1);
+ for (k = j; k < PRIO_RANGE * PRIO_RANGE; k += j)
+ __clear_bit(k / PRIO_RANGE, prio_matrix[i]);
+ }
+ }
+
for_each_possible_cpu(i) {
struct prio_array *array;
struct rq *rq;
--
-ck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists