| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070314131934.GL22464@csclub.uwaterloo.ca>
Date: Wed, 14 Mar 2007 09:19:34 -0400
From: lsorense@...lub.uwaterloo.ca (Lennart Sorensen)
To: Rodolfo Giometti <giometti@...eenne.com>
Cc: linux-kernel@...r.kernel.org, linuxpps@...enneenne.com,
Russell King <rmk+lkml@....linux.org.uk>,
Jan Dittmer <jdi@....org>, Pavel Machek <pavel@....cz>
Subject: Re: [PATCH 1/1] LinuxPPS: Pulse per Second support for Linux
On Wed, Mar 14, 2007 at 10:31:46AM +0100, Rodolfo Giometti wrote:
> On Tue, Mar 13, 2007 at 06:48:17PM -0400, Lennart Sorensen wrote:
> >
> > I have tried out 3.0.0-rc2 which seems to work pretty well so far (when
>
> Thanks. I just posted to the linux kernel ML the last release
> 3.0.0. Maybe you can do a "git pull" and try it out. :)
I will grab the last couple of commits and try although they didn't
sound like they really make much difference.
> > combined with the patches to the jsm driver I just posted). It took soe
> > work to get ntp's refclock_nmea to work though, since the patch that is
> > linked to from the linuxpps page seems out of date. Here is the patch
> > that seems to be working for me, although I am still testing it. Given
> > you know the linuxpps code better perhaps you can see if it looks sane
> > to you.
> >
> > --- ntpd/refclock_nmea.c.ori 2007-03-13 18:38:01.000000000 -0400
> > +++ ntpd/refclock_nmea.c 2007-03-13 18:44:47.000000000 -0400
> > @@ -79,6 +79,7 @@
> > #define RANGEGATE 500000 /* range gate (ns) */
> >
> > #define LENNMEA 75 /* min timecode length */
> > +#define LENPPS PPS_MAX_NAME_LEN
> >
> > /*
> > * Tables to compute the ddd of year form icky dd/mm timecode. Viva la
> > @@ -99,6 +100,7 @@
> > pps_params_t pps_params; /* pps parameters */
> > pps_info_t pps_info; /* last pps data */
> > pps_handle_t handle; /* pps handlebars */
> > + int handle_created; /* pps handle created flag */
> > #endif /* HAVE_PPSAPI */
> > };
> >
> > @@ -147,6 +149,11 @@
> > register struct nmeaunit *up;
> > struct refclockproc *pp;
> > int fd;
> > +#ifdef PPS_HAVE_FINDPATH
> > + char id[LENPPS] = "",
> > + path[LENPPS],
> > + mylink[LENPPS] = ""; /* just a default device */
> > +#endif /* PPS_HAVE_FINDPATH */
> > char device[20];
> >
> > /*
> > @@ -201,7 +208,20 @@
> > #else
> > return (0);
> > #endif
> > - }
> > + } else {
> > + struct serial_struct ss;
> > + if (ioctl(fd, TIOCGSERIAL, &ss) < 0 ||
> > + (
> > + ss.flags |= ASYNC_HARDPPS_CD,
> > + ioctl(fd, TIOCSSERIAL, &ss)) < 0) {
> > + msyslog(LOG_NOTICE, "refclock_nmea: TIOCSSERIAL fd %d, %m", fd);
> > + msyslog(LOG_NOTICE,
> > + "refclock_nmea: optional PPS processing not available");
> > + } else {
> > + msyslog(LOG_INFO,
> > + "refclock_nmea: PPS detection on");
> > + }
> > + }
>
> You should use "setserial" here. Keep in mind that the PPS source
> could be _not_ connected with the serial line at all.
I couldn't find any way to do that with setserial (at least not the
version I have), and I would rather not have to install setserial just
to do that. Which version of setserial is needed and what arguments
does it need to do it?
If it is NOT connected to the same device, then how would you specify
it? The ntp configuration is rather sparse when it comes to specifying
anything and seems to rely in symlinks to hardcoded device names for
finding everything. I suppose one could have gps# for the nmea messages
and pps# for the associated pps device name symlink (which may point
to something that doesn't even exist if there is an internal source of
that name with no associated device). Does that seem reasonable? I can
certainly change it to do that. Certainly refclock_atom already uses
/dev/pps# as it's device, so using that again may be reasonable.
> > /*
> > * Allocate and initialize unit structure
> > @@ -238,12 +258,26 @@
> > * Start the PPSAPI interface if it is there. Default to use
> > * the assert edge and do not enable the kernel hardpps.
> > */
> > +#ifdef PPS_HAVE_FINDPATH
> > + /* Get the PPS source's real name */
> > + //time_pps_readlink(mylink, LENPPS, path, LENPPS);
>
> Remove unneeded code.
Oops. Missed that one. I was changing it to the below line to reuse
the same serial device already specified for the NMEA messages.
I actually find the way it determines the pps device a bit annoying.
Right now I have to do this:
cd /dev
ln -s ttyn0 jsm0
ln -s jsm0 gps0
This way gps0 is the symlink the ntp refclock looks for when asked for
device 0, and readlink turns that into jsm0 (since the internal driver
name for ttyn0 is jsm, that is what the pps code insists it must be
named), which then is another symlink to the real device name. Same for
ttyS3 <- serial3 <- gps0. Now it would be nice if the internal driver
name matched the device name, but apparently that really never seems to
happen. Is all this symlink spagheti really necesary?
> > + time_pps_readlink(device, LENPPS, path, LENPPS);
>
> Test the return value (see the wiki at
> http://wiki.enneenne.com/index.php/LinuxPPS_support#How_to_modify_a_refclock_to_work_with_LinuxPPS).
OK, I will do that too. Apparently the current refclock_nmea patch
fails that too then.
> > + /* Try to find the source */
> > + fd = time_pps_findpath(path, LENPPS, id, LENPPS);
> > + if (fd < 0) {
> > + msyslog(LOG_ERR, "refclock_nmea: cannot find PPS path \"%s\" in the system", path);
> > + return (0);
> > + }
> > + msyslog(LOG_INFO, "refclock_nmea: found PPS source \"%s\" at id #%d on \"%s\"", path, fd, id);
> > +#endif /* PPS_HAVE_FINDPATH */
> > if (time_pps_create(fd, &up->handle) < 0) {
> > - up->handle = 0;
> > + up->handle_created = 0;
> > msyslog(LOG_ERR,
> > "refclock_nmea: time_pps_create failed: %m");
> > return (1);
> > }
> > + up->handle_created = ~0;
> > return(nmea_ppsapi(peer, 0, 0));
> > #else
> > return (1);
> > @@ -265,8 +299,10 @@
> > pp = peer->procptr;
> > up = (struct nmeaunit *)pp->unitptr;
> > #ifdef HAVE_PPSAPI
> > - if (up->handle != 0)
> > + if (up->handle_created) {
> > time_pps_destroy(up->handle);
> > + up->handle_created = 0;
> > + }
> > #endif /* HAVE_PPSAPI */
> > io_closeclock(&pp->io);
> > free(up);
> > @@ -374,7 +410,7 @@
> > /*
> > * Convert the timespec nanoseconds field to ntp l_fp units.
> > */
> > - if (up->handle == 0)
> > + if (!up->handle_created)
> > return (0);
> > timeout.tv_sec = 0;
> > timeout.tv_nsec = 0;
>
> Please, rewiev and test the code and I'll publish it.
Will do.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists