... Allocate Port Service[0000:00:1c.1:pcie03] PM: Adding info for pci_express:0000:00:1c.1:pcie03 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] PM: Adding info for pci_express:0000:00:1c.2:pcie00 Allocate Port Service[0000:00:1c.2:pcie02] PM: Adding info for pci_express:0000:00:1c.2:pcie02 Allocate Port Service[0000:00:1c.2:pcie03] PM: Adding info for pci_express:0000:00:1c.2:pcie03 PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] PM: Adding info for pci_express:0000:00:1c.3:pcie00 Allocate Port Service[0000:00:1c.3:pcie02] PM: Adding info for pci_express:0000:00:1c.3:pcie02 Allocate Port Service[0000:00:1c.3:pcie03] PM: Adding info for pci_express:0000:00:1c.3:pcie03 PM: Adding info for platform:vesafb.0 vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 262144k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:c4e0 vesafb: pmi: set display start = c00cc516, set palette = c00cc580 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 PM: Adding info for No Bus:fb0 PM: Adding info for No Bus:vtcon1 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: SSDT 3FE85F02, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050228) ACPI: SSDT 3FE859BB, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3FE8613A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050228) ACPI: SSDT 3FE85E7D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) Time: hpet clocksource has been installed. ACPI: Thermal Zone [TZ00] (37 C) ACPI: Thermal Zone [TZ01] (37 C) PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet hpet_resources: 0xfed00000 is busy loop: loaded (max 8 devices) PM: Adding info for No Bus:lo tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PM: Adding info for No Bus:tun ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015440 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00015448 irq 15 scsi0 : ata_piix PM: Adding info for No Bus:host0 Clocksource tsc unstable (delta = -154102037 ns) ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi1 : ata_piix PM: Adding info for No Bus:host1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 < sda5 sda6 > sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 PM: Adding info for No Bus:target1:0:0 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-845S D201 PQ: 0 ANSI: 5 PM: Adding info for scsi:1:0:0:0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:08' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 serio: i8042 AUX0 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio1 serio: i8042 AUX1 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio2 serio: i8042 AUX2 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio3 serio: i8042 AUX3 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio4 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). PM: Adding info for No Bus:timer PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 PM: Adding info for No Bus:seq ALSA device list: No soundcards found. IPv4 over IPv4 tunneling driver PM: Adding info for No Bus:tunl0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Starting balanced_irq Using IPI No-Shortcut mode Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input5 ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: replayed 7 transactions in 0 seconds ReiserFS: sda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 188k freed PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 tg3.c:v3.74 (February 20, 2007) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.0 to 64 PM: Adding info for No Bus:eth0 eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:10:9a:b1 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] Adding 3004112k swap on /dev/sda6. Priority:-1 extents:1 across:3004112k ReiserFS: sda4: found reiserfs format "3.6" with standard journal ReiserFS: sda4: using ordered data mode ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda4: checking transaction log (sda4) ReiserFS: sda4: replayed 4 transactions in 0 seconds ReiserFS: sda4: Using r5 hash to sort names PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100506, writing 100106) PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. PM: Preparing system for mem sleep Stopping tasks ... done. Suspending console(s) psmouse serio4: suspend serio serio3: suspend serio serio2: suspend serio serio1: suspend atkbd serio0: suspend i8042 i8042: suspend sr 1:0:0:0: suspend sd 0:0:0:0: suspend vesafb vesafb.0: suspend pci_express 0000:00:1c.3:pcie03: suspend pci_express 0000:00:1c.3:pcie02: suspend pci_express 0000:00:1c.3:pcie00: suspend pci_express 0000:00:1c.2:pcie03: suspend pci_express 0000:00:1c.2:pcie02: suspend pci_express 0000:00:1c.2:pcie00: suspend pci_express 0000:00:1c.1:pcie03: suspend pci_express 0000:00:1c.1:pcie02: suspend pci_express 0000:00:1c.1:pcie00: suspend pci_express 0000:00:1c.0:pcie03: suspend pci_express 0000:00:1c.0:pcie02: suspend pci_express 0000:00:1c.0:pcie00: suspend pci_express 0000:00:01.0:pcie03: suspend pci_express 0000:00:01.0:pcie00: suspend platform pcspkr: suspend pnp 00:0a: suspend i8042 aux 00:09: suspend i8042 kbd 00:08: suspend pnp 00:07: suspend system 00:06: suspend pnp 00:05: suspend system 00:04: suspend pnp 00:03: suspend pnp 00:02: suspend system 00:01: suspend pnp 00:00: suspend pci 0000:06:04.4: suspend pci 0000:06:04.3: suspend pci 0000:06:04.2: suspend pci 0000:06:04.1: suspend pci 0000:06:04.0: suspend pci 0000:06:00.0: suspend pci 0000:05:00.0: suspend tg3 0000:04:00.0: suspend PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100506, writing 100106) pci 0000:01:00.0: suspend pci 0000:00:1f.3: suspend ata_piix 0000:00:1f.2: suspend ACPI: PCI interrupt for device 0000:00:1f.2 disabled pci 0000:00:1f.0: suspend pci 0000:00:1e.0: suspend pci 0000:00:1d.7: suspend pci 0000:00:1d.3: suspend pci 0000:00:1d.2: suspend pci 0000:00:1d.1: suspend pci 0000:00:1d.0: suspend pcieport-driver 0000:00:1c.3: suspend pcieport-driver 0000:00:1c.2: suspend pcieport-driver 0000:00:1c.1: suspend pcieport-driver 0000:00:1c.0: suspend pci 0000:00:1b.0: suspend pcieport-driver 0000:00:01.0: suspend pci 0000:00:00.0: suspend thermal thermal:02: suspend thermal thermal:01: suspend acpi thermal:00: suspend acpi device:38: suspend acpi device:37: suspend acpi device:36: suspend acpi device:35: suspend acpi device:34: suspend acpi device:33: suspend acpi device:32: suspend acpi device:31: suspend acpi device:30: suspend acpi device:2f: suspend acpi device:2e: suspend acpi device:2d: suspend acpi device:2c: suspend acpi SMCF010:00: suspend container PNP0A05:00: suspend ac ACPI0003:00: suspend acpi SYN0703:00: suspend acpi PNP0303:00: suspend acpi PNP0100:00: suspend acpi PNP0B00:00: suspend acpi PNP0C02:01: suspend acpi PNP0C04:00: suspend acpi PNP0000:00: suspend acpi PNP0103:00: suspend acpi INT0800:00: suspend acpi PNP0200:00: suspend battery PNP0C0A:00: suspend ec PNP0C09:00: suspend pci_link PNP0C0F:07: suspend pci_link PNP0C0F:06: suspend pci_link PNP0C0F:05: suspend pci_link PNP0C0F:04: suspend pci_link PNP0C0F:03: suspend pci_link PNP0C0F:02: suspend pci_link PNP0C0F:01: suspend pci_link PNP0C0F:00: suspend acpi device:2b: suspend acpi device:2a: suspend acpi device:29: suspend acpi device:28: suspend acpi device:27: suspend acpi device:26: suspend acpi device:25: suspend acpi device:24: suspend acpi device:23: suspend acpi device:22: suspend acpi device:21: suspend acpi device:20: suspend acpi device:1f: suspend acpi device:1e: suspend acpi device:1d: suspend acpi device:1c: suspend acpi device:1b: suspend acpi device:1a: suspend acpi device:19: suspend acpi device:18: suspend acpi device:17: suspend acpi device:16: suspend acpi device:15: suspend acpi device:14: suspend acpi device:13: suspend acpi device:12: suspend acpi device:11: suspend acpi device:10: suspend acpi device:0f: suspend acpi device:0e: suspend acpi device:0d: suspend acpi device:0c: suspend acpi device:0b: suspend acpi device:0a: suspend acpi device:09: suspend acpi device:08: suspend acpi device:07: suspend acpi device:06: suspend acpi device:05: suspend acpi video:01: suspend acpi device:04: suspend acpi device:03: suspend acpi device:02: suspend acpi video:00: suspend acpi device:01: suspend acpi PNP0C02:00: suspend pci_root PNP0A08:00: suspend button PNP0C0C:00: suspend button PNP0C0E:00: suspend acpi PNP0C14:00: suspend button PNP0C0D:00: suspend acpi device:00: suspend processor ACPI0007:01: suspend processor ACPI0007:00: suspend button button_power:00: suspend acpi acpi_system:00: suspend Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code PM: Removing info for No Bus:msr1 PM: Removing info for No Bus:cpu1 CPU1 is down PM: Entering mem sleep vesafb vesafb.0: LATE suspend platform pcspkr: LATE suspend pci 0000:06:04.4: LATE suspend pci 0000:06:04.3: LATE suspend pci 0000:06:04.2: LATE suspend pci 0000:06:04.1: LATE suspend pci 0000:06:04.0: LATE suspend pci 0000:06:00.0: LATE suspend pci 0000:05:00.0: LATE suspend tg3 0000:04:00.0: LATE suspend pci 0000:01:00.0: LATE suspend pci 0000:00:1f.3: LATE suspend pci 0000:00:1f.0: LATE suspend pci 0000:00:1e.0: LATE suspend pci 0000:00:1d.7: LATE suspend pci 0000:00:1d.3: LATE suspend pci 0000:00:1d.2: LATE suspend pci 0000:00:1d.1: LATE suspend pci 0000:00:1d.0: LATE suspend pcieport-driver 0000:00:1c.3: LATE suspend pcieport-driver 0000:00:1c.2: LATE suspend pcieport-driver 0000:00:1c.1: LATE suspend pcieport-driver 0000:00:1c.0: LATE suspend pci 0000:00:1b.0: LATE suspend pcieport-driver 0000:00:01.0: LATE suspend pci 0000:00:00.0: LATE suspend Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! pci 0000:00:00.0: EARLY resume pcieport-driver 0000:00:01.0: EARLY resume pci 0000:00:1b.0: EARLY resume pcieport-driver 0000:00:1c.0: EARLY resume pcieport-driver 0000:00:1c.1: EARLY resume pcieport-driver 0000:00:1c.2: EARLY resume pcieport-driver 0000:00:1c.3: EARLY resume pci 0000:00:1d.0: EARLY resume pci 0000:00:1d.1: EARLY resume pci 0000:00:1d.2: EARLY resume pci 0000:00:1d.3: EARLY resume pci 0000:00:1d.7: EARLY resume pci 0000:00:1e.0: EARLY resume pci 0000:00:1f.0: EARLY resume ata_piix 0000:00:1f.2: EARLY resume pci 0000:00:1f.3: EARLY resume pci 0000:01:00.0: EARLY resume tg3 0000:04:00.0: EARLY resume pci 0000:05:00.0: EARLY resume pci 0000:06:00.0: EARLY resume pci 0000:06:04.0: EARLY resume pci 0000:06:04.1: EARLY resume pci 0000:06:04.2: EARLY resume pci 0000:06:04.3: EARLY resume pci 0000:06:04.4: EARLY resume platform pcspkr: EARLY resume vesafb vesafb.0: EARLY resume i8042 i8042: EARLY resume PM: Finishing wakeup. Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 189932.25 BogoMIPS (lpj=94966129) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08 PM: Adding info for No Bus:msr1 PM: Adding info for No Bus:cpu1 CPU1 is up acpi acpi_system:00: resuming button button_power:00: resuming processor ACPI0007:00: resuming processor ACPI0007:01: resuming acpi device:00: resuming button PNP0C0D:00: resuming acpi PNP0C14:00: resuming button PNP0C0E:00: resuming button PNP0C0C:00: resuming pci_root PNP0A08:00: resuming acpi PNP0C02:00: resuming acpi device:01: resuming acpi video:00: resuming acpi device:02: resuming acpi device:03: resuming acpi device:04: resuming acpi video:01: resuming acpi device:05: resuming acpi device:06: resuming acpi device:07: resuming acpi device:08: resuming acpi device:09: resuming acpi device:0a: resuming acpi device:0b: resuming acpi device:0c: resuming acpi device:0d: resuming acpi device:0e: resuming acpi device:0f: resuming acpi device:10: resuming acpi device:11: resuming acpi device:12: resuming acpi device:13: resuming acpi device:14: resuming acpi device:15: resuming acpi device:16: resuming acpi device:17: resuming acpi device:18: resuming acpi device:19: resuming acpi device:1a: resuming acpi device:1b: resuming acpi device:1c: resuming acpi device:1d: resuming acpi device:1e: resuming acpi device:1f: resuming acpi device:20: resuming acpi device:21: resuming acpi device:22: resuming acpi device:23: resuming acpi device:24: resuming acpi device:25: resuming acpi device:26: resuming acpi device:27: resuming acpi device:28: resuming acpi device:29: resuming acpi device:2a: resuming acpi device:2b: resuming pci_link PNP0C0F:00: resuming pci_link PNP0C0F:01: resuming pci_link PNP0C0F:02: resuming pci_link PNP0C0F:03: resuming pci_link PNP0C0F:04: resuming pci_link PNP0C0F:05: resuming pci_link PNP0C0F:06: resuming pci_link PNP0C0F:07: resuming ec PNP0C09:00: resuming battery PNP0C0A:00: resuming acpi PNP0200:00: resuming acpi INT0800:00: resuming acpi PNP0103:00: resuming acpi PNP0000:00: resuming acpi PNP0C04:00: resuming acpi PNP0C02:01: resuming acpi PNP0B00:00: resuming acpi PNP0100:00: resuming acpi PNP0303:00: resuming acpi SYN0703:00: resuming ac ACPI0003:00: resuming container PNP0A05:00: resuming acpi SMCF010:00: resuming acpi device:2c: resuming acpi device:2d: resuming acpi device:2e: resuming acpi device:2f: resuming acpi device:30: resuming acpi device:31: resuming acpi device:32: resuming acpi device:33: resuming acpi device:34: resuming acpi device:35: resuming acpi device:36: resuming acpi device:37: resuming acpi device:38: resuming acpi thermal:00: resuming thermal thermal:01: resuming thermal thermal:02: resuming pci 0000:00:00.0: resuming pcieport-driver 0000:00:01.0: resuming PM: Writing back config space on device 0000:00:01.0 at offset f (was 100, writing 1a0106) PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0) PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing cff1c001) PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing d1f0d000) PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 6060) PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100507) PCI: Setting latency timer of device 0000:00:01.0 to 64 pci 0000:00:1b.0: resuming pcieport-driver 0000:00:1c.0: resuming PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010b) PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0) PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 200000f0) PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 20200) PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100504) PCI: Setting latency timer of device 0000:00:1c.0 to 64 pcieport-driver 0000:00:1c.1: resuming PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40206) PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing fff0) PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0) PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 pcieport-driver 0000:00:1c.2: resuming PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 4030b) PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing d200d200) PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 200000f0) PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 pcieport-driver 0000:00:1c.3: resuming PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing d210d210) PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 200000f0) PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing 50500) PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 pci 0000:00:1d.0: resuming pci 0000:00:1d.1: resuming pci 0000:00:1d.2: resuming pci 0000:00:1d.3: resuming pci 0000:00:1d.7: resuming pci 0000:00:1e.0: resuming PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 53f15001) PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing d220d220) PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 22807070) PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 pci 0000:00:1f.0: resuming PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) ata_piix 0000:00:1f.2: resuming PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 2ff) PM: Writing back config space on device 0000:00:1f.2 at offset 7 (was 1, writing 375) PM: Writing back config space on device 0000:00:1f.2 at offset 6 (was 1, writing 171) PM: Writing back config space on device 0000:00:1f.2 at offset 5 (was 1, writing 3f5) PM: Writing back config space on device 0000:00:1f.2 at offset 4 (was 1, writing 1f1) PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 pci 0000:00:1f.3: resuming pci 0000:01:00.0: resuming PM: Writing back config space on device 0000:01:00.0 at offset f (was 100, writing 106) PM: Writing back config space on device 0000:01:00.0 at offset 9 (was 1, writing 6001) PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 4, writing d0000004) PM: Writing back config space on device 0000:01:00.0 at offset 5 (was c, writing c000000c) PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 0, writing d1000000) PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100107) tg3 0000:04:00.0: resuming PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100506) tg3: eth0: Link is down. pci 0000:05:00.0: resuming PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 0, writing d2100000) PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100000, writing 100106) pci 0000:06:00.0: resuming pci 0000:06:04.0: resuming PM: Writing back config space on device 0000:06:04.0 at offset f (was 74001ff, writing 7400106) PM: Writing back config space on device 0000:06:04.0 at offset e (was 0, writing 78fc) PM: Writing back config space on device 0000:06:04.0 at offset d (was 0, writing 7800) PM: Writing back config space on device 0000:06:04.0 at offset c (was 0, writing 74fc) PM: Writing back config space on device 0000:06:04.0 at offset b (was 0, writing 7400) PM: Writing back config space on device 0000:06:04.0 at offset a (was 0, writing 57fff000) PM: Writing back config space on device 0000:06:04.0 at offset 9 (was 0, writing 54000000) PM: Writing back config space on device 0000:06:04.0 at offset 8 (was 0, writing 53fff000) PM: Writing back config space on device 0000:06:04.0 at offset 7 (was 0, writing 50000000) PM: Writing back config space on device 0000:06:04.0 at offset 6 (was 20000000, writing b00a0706) PM: Writing back config space on device 0000:06:04.0 at offset 4 (was 0, writing d2200000) ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16 pci 0000:06:04.1: resuming PM: Writing back config space on device 0000:06:04.1 at offset f (was 40102ff, writing 401020b) PM: Writing back config space on device 0000:06:04.1 at offset 4 (was 0, writing d2201800) pci 0000:06:04.2: resuming pci 0000:06:04.3: resuming pci 0000:06:04.4: resuming PM: Writing back config space on device 0000:06:04.4 at offset 4 (was 0, writing d2201900) pnp 00:00: resuming system 00:01: resuming pnp 00:02: resuming pnp 00:03: resuming system 00:04: resuming pnp 00:05: resuming system 00:06: resuming pnp 00:07: resuming i8042 kbd 00:08: resuming pnp: Res cnt 3 pnp: res cnt 3 pnp: Encode io pnp: Encode io pnp: Encode irq pnp: Failed to activate device 00:08. i8042 aux 00:09: resuming pnp: Res cnt 1 pnp: res cnt 1 pnp: Encode irq pnp: Failed to activate device 00:09. pnp 00:0a: resuming platform pcspkr: resuming pci_express 0000:00:01.0:pcie00: resuming pci_express 0000:00:01.0:pcie03: resuming pci_express 0000:00:1c.0:pcie00: resuming pci_express 0000:00:1c.0:pcie02: resuming pci_express 0000:00:1c.0:pcie03: resuming pci_express 0000:00:1c.1:pcie00: resuming pci_express 0000:00:1c.1:pcie02: resuming pci_express 0000:00:1c.1:pcie03: resuming pci_express 0000:00:1c.2:pcie00: resuming pci_express 0000:00:1c.2:pcie02: resuming pci_express 0000:00:1c.2:pcie03: resuming pci_express 0000:00:1c.3:pcie00: resuming pci_express 0000:00:1c.3:pcie02: resuming pci_express 0000:00:1c.3:pcie03: resuming vesafb vesafb.0: resuming sd 0:0:0:0: resuming sr 1:0:0:0: resuming i8042 i8042: resuming atkbd serio0: resuming serio serio1: resuming serio serio2: resuming serio serio3: resuming psmouse serio4: resuming Restarting tasks ... done. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ata1.00: configured for UDMA/100 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: configured for UDMA/33