Linux version 2.6.19.7 (root@mythtv) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #2 SMP PREEMPT Mon Mar 12 13:22:05 GMT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f3b00 Entering add_active_range(0, 0, 259808) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259808 early_node_map[1] active PFN ranges 0: 0 -> 259808 On node 0 totalpages: 259808 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30195 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f7f20 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e3040 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e30c0 ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7600 ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7500 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x3f6e7680 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x3f6e7b10 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) Detected 2128.149 MHz processor. Built 1 zonelists. Total pages: 257779 Kernel command line: auto BOOT_IMAGE=2.6.19.7 ro root=801 apm=power-off nomce quiet netconsole=6665@192.168.2.2/eth0,6666@192.168.2.1/00:C0:9F:56:B1:76 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1022968k/1039232k available (4656k kernel code, 15644k reserved, 1345k data, 288k init, 121728k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc06e5000 - 0xc072d000 ( 288 kB) .data : 0xc058c292 - 0xc06dc7ec (1345 kB) .text : 0xc0100000 - 0xc058c292 (4656 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4257.85 BogoMIPS (lpj=2128927) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4415.78 BogoMIPS (lpj=2207893) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Total of 2 processors activated (8673.64 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=1373 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *5 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 10 11 12 14 *15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x400-0x4bf could not be reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:01.0 IO window: 6000-6fff MEM window: fd600000-fd6fffff PREFETCH window: fd500000-fd5fffff PCI: Bridge: 0000:00:1c.0 IO window: 5000-5fff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:1c.2 IO window: 9000-afff MEM window: fdc00000-fdcfffff PREFETCH window: fdb00000-fdbfffff PCI: Bridge: 0000:00:1c.3 IO window: 7000-7fff MEM window: fda00000-fdafffff PREFETCH window: fd900000-fd9fffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-8fff MEM window: f9000000-fcffffff PREFETCH window: fd700000-fd7fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1174466129.602:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 7993, nTxLock = 63950 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 7616k vesafb: mode is 1024x768x16, linelength=2048, pages=3 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 512M @ 0xd0000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB361: IDE controller at PCI slot 0000:03:00.1 PCI: Enabling device 0000:03:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 18 JMB361: chipset revision 2 JMB361: 100% native mode on irq 18 PCI: Setting latency timer of device 0000:03:00.1 to 64 ide2: BM-DMA at 0x9c00-0x9c07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9c08-0x9c0f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive ide2 at 0xac00-0xac07,0xa802 on irq 18 Probing IDE interface ide3... Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide3... hde: ATAPI 38X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724.<7>ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 19 ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 19 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xDC07 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 19 ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 19 scsi2 : ata_piix ATA: abnormal status 0x7F on port 0xC807 scsi3 : ata_piix ATA: abnormal status 0x7F on port 0xC007 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 867 MB/s raid6: int32x2 875 MB/s raid6: int32x4 656 MB/s raid6: int32x8 570 MB/s raid6: mmxx1 2472 MB/s raid6: mmxx2 3097 MB/s raid6: sse1x1 1886 MB/s raid6: sse1x2 2390 MB/s raid6: sse2x1 3546 MB/s raid6: sse2x2 4160 MB/s raid6: using algorithm sse2x2 (4160 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 7832.000 MB/sec raid5: using function: pIII_sse (7832.000 MB/sec) device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com NET: Registered protocol family 1 NET: Registered protocol family 15 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 461079 to 462099 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 12981 and revoked 3/6 blocks kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 288k freed ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.0 to 64 sky2 v1.10 addr 0xfdafc000 irq 18 Yukon-EC Ultra (0xb4) rev 2 sky2 eth0: addr 00:15:58:8a:b6:67 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1f.3[D] -> GSI 19 (level, low) -> IRQ 18 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000f400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Linux video capture interface: v2.00 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000f000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected cx2388x dvb driver version 0.0.6 loaded cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ec00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000e800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-1: configuration #1 chosen from 1 choice CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe usb 3-2: new low speed USB device using uhci_hcd and address 2 tveeprom 1-0050: Hauppauge model 90003, rev C2B0, serial# 768142 tveeprom 1-0050: MAC address is 00-0D-FE-0B-B8-8E tveeprom 1-0050: tuner model is Thompson DTT75105 (idx 110, type 4) tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80) tveeprom 1-0050: audio processor is None (idx 0) tveeprom 1-0050: decoder processor is CX882 (idx 25) tveeprom 1-0050: has no radio, has IR remote cx88[0]: hauppauge eeprom: model=90003 input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input0 ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:02.2 to 64 cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 19, latency: 64, mmio: 0xfb000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Conexant CX22702 DVB-T)... ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 17 (level, low) -> IRQ 19 cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 19, latency: 20, mmio: 0xf9000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 17, io mem 0xfdfff000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfdffe000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 3-2: device descriptor read/all, error -71 cx2388x blackbird driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... usb 1-1: USB disconnect, address 2 usb 1-1: new low speed USB device using uhci_hcd and address 3 Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k usb 1-1: configuration #1 chosen from 1 choice EXT3 FS on sda1, internal journal bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bt878: AUDIO driver version 0.0.0 loaded Non-volatile memory driver v1.2 usb 3-2: new low speed USB device using uhci_hcd and address 4 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: BTC USB Multimedia Cordless Kit as /class/input/input1 input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:1d.0-2 input: BTC USB Multimedia Cordless Kit as /class/input/input2 input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:1d.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none NET: Registered protocol family 10 lo: Disabled Privacy Extensions [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.5.0 20060119 on minor 0 eth0: no IPv6 routers present