| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1174661503.5373.16.camel@lapot>
Date: Fri, 23 Mar 2007 16:51:33 +0200
From: Yan Burman <burman.yan@...il.com>
To: linux-kernel@...r.kernel.org, khali@...ux-fr.org
Subject: [PATCH 2.6.21-rc4] hwmon: HP Mobile Data Protection System 3D ACPI
driver
HP Mobile Data Protection System 3D ACPI driver. Similar to hdaps in functionality.
This driver provides 4 kinds of functionality:
1) Creates a misc device /dev/accel that acts similar to /dev/rtc and unblocks
the process reading from it when the device detects free-fall interrupt
2) Functions as an input class device to provide similar functionality to
hdaps, in order to be able to use the laptop as a joystick
3) Provides an interface similar to hdaps, so that hdapsd could work with it
4) Makes it possible to power the device off.
Applications such as hdaps-gl and hdapsd as well as neverball work with
this driver unmodified.
Signed-off-by: Yan Burman <burman.yan@...il.com>
diff -Nrubp linux-2.6.21-rc4_orig/Documentation/hwmon/mdps linux-2.6.21-rc4/Documentation/hwmon/mdps
--- linux-2.6.21-rc4_orig/Documentation/hwmon/mdps 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.21-rc4/Documentation/hwmon/mdps 2007-03-23 16:06:09.000000000 +0200
@@ -0,0 +1,86 @@
+Kernel driver mdps
+==================
+
+Supported chips:
+
+ * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
+
+Author:
+ Yan Burman <burman.yan@...il.com>
+
+
+Description
+-----------
+
+This driver provides support for the HP Mobile Data Protection
+System 3D (mdps), which is an accelerometer. HP nc6420 and nx9420
+are supported right now, but it may work on other models as well. The
+accelerometer data is readable via /sys/devices/platform/mdps.
+
+Sysfs attributes under /sys/devices/platform/mdps/:
+position - 2D position that the accelerometer reports. Format: "(x,y)"
+position3d - 3D position that the accelerometer reports. Format: "(x,y,z)"
+calibrate - read: values (x, y) that are used as the base for input class device operation.
+ write: forces the base to be recalibrated.
+rate - reports the sampling rate of the accelerometer device in HZ
+state - read: the current power state of the accelerometer device
+ write: "0" or "1" to power on/off the device
+joystick - read: whether the input class device is active or not
+ write: "0" or "1" to enable/disable the input device
+
+Load time parameters:
+bool joystick - whether to enable the input class device or not (default 1)
+bool power_off - whether to power off the device on module load (default 0)
+bool hdaps_compat - Make the driver export same interfaces as hdaps,
+ so that apps like hdaps-gl will work the same as with hdaps (default 0)
+ The effect of this is:
+ 1) Instead of /sys/devices/platform/mdps/, /sys/devices/platform/hdaps/ is created
+ 2) Sensitivity is adjusted to match that of hdaps
+bool input_3d - Whether to operate as a 3D input device. (default 0)
+ BIG FAT WARNING: Do not enable this mode unless you are sure
+ that you want it, since it eats more CPU
+
+This driver also provides an absolute input class device, allowing
+the laptop to act as a pinball machine-esque joystick.
+
+Another feature of the driver is misc device called accel that acts
+similar to /dev/rtc and reacts on free-fall interrupts received from
+the device. It supports blocking operations, poll/select and fasync
+operation modes. You must read 4 bytes from the device.
+The result is number of free-fall interrupts since the last successful read.
+
+Example userspace code:
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+
+int main(int argc, char* argv[])
+{
+ int fd, ret;
+ uint32_t count;
+
+ fd = open("/dev/accel", O_RDONLY);
+ if (fd < 0) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ for (;;) {
+ ret = read(fd, &count, sizeof(count));
+ if (ret != sizeof(count)) {
+ perror("read");
+ break;
+ }
+
+ printf("Got %d free-fall interrupts\n", count);
+ }
+
+ close(fd);
+ return EXIT_SUCCESS;
+}
diff -Nrubp linux-2.6.21-rc4_orig/drivers/hwmon/Kconfig linux-2.6.21-rc4/drivers/hwmon/Kconfig
--- linux-2.6.21-rc4_orig/drivers/hwmon/Kconfig 2007-03-23 15:59:59.000000000 +0200
+++ linux-2.6.21-rc4/drivers/hwmon/Kconfig 2007-03-23 16:07:24.000000000 +0200
@@ -593,6 +593,26 @@ config SENSORS_HDAPS
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_MDPS
+ tristate "HP Mobile Data Protection System 3D (mdps)"
+ depends on ACPI && HWMON && INPUT && X86
+ default n
+ help
+ This driver provides support for the HP Mobile Data Protection
+ System 3D (mdps), which is an accelerometer. HP nc6420 and nx9420
+ are supported right now, but it may work on other models as well. The
+ accelerometer data is readable via /sys/devices/platform/mdps.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ Another feature of the driver is misc device called accel that acts
+ similar to /dev/rtc and reacts on free-fall interrupts received from
+ the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called mdps.
+
config HWMON_DEBUG_CHIP
bool "Hardware Monitoring Chip debugging messages"
depends on HWMON
diff -Nrubp linux-2.6.21-rc4_orig/drivers/hwmon/Makefile linux-2.6.21-rc4/drivers/hwmon/Makefile
--- linux-2.6.21-rc4_orig/drivers/hwmon/Makefile 2007-03-23 15:59:59.000000000 +0200
+++ linux-2.6.21-rc4/drivers/hwmon/Makefile 2007-03-23 16:08:17.000000000 +0200
@@ -29,6 +29,7 @@ obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
+obj-$(CONFIG_SENSORS_MDPS) += mdps.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
diff -Nrubp linux-2.6.21-rc4_orig/drivers/hwmon/mdps.c linux-2.6.21-rc4/drivers/hwmon/mdps.c
--- linux-2.6.21-rc4_orig/drivers/hwmon/mdps.c 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.21-rc4/drivers/hwmon/mdps.c 2007-03-23 16:05:52.000000000 +0200
@@ -0,0 +1,801 @@
+/*
+ * mdps.c - HP Mobile Data Protection System 3D ACPI driver
+ *
+ * Copyright (C) 2007 Yan Burman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * 30/12/2006
+ * Added support for NX9420 and hdaps compatibility mode.
+ * Thanks to Jonas Majauskas for testing this on NX9420
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <linux/miscdevice.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/freezer.h>
+
+#include <acpi/acpi_drivers.h>
+#include <acpi/acnamesp.h>
+
+#include <asm/uaccess.h>
+#include <asm/atomic.h>
+
+#define VERSION "0.7"
+
+#define DRIVER_NAME "mdps"
+#define ACPI_MDPS_CLASS "accelerometer"
+#define ACPI_MDPS_ID "HPQ0004"
+
+/* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ */
+
+#define MDPS_WHO_AM_I 0x0F /*r 00111010 */
+#define MDPS_OFFSET_X 0x16 /*rw */
+#define MDPS_OFFSET_Y 0x17 /*rw */
+#define MDPS_OFFSET_Z 0x18 /*rw */
+#define MDPS_GAIN_X 0x19 /*rw */
+#define MDPS_GAIN_Y 0x1A /*rw */
+#define MDPS_GAIN_Z 0x1B /*rw */
+#define MDPS_CTRL_REG1 0x20 /*rw 00000111 */
+#define MDPS_CTRL_REG2 0x21 /*rw 00000000 */
+#define MDPS_CTRL_REG3 0x22 /*rw 00001000 */
+#define MDPS_HP_FILTER RESET 0x23 /*r */
+#define MDPS_STATUS_REG 0x27 /*rw 00000000 */
+#define MDPS_OUTX_L 0x28 /*r */
+#define MDPS_OUTX_H 0x29 /*r */
+#define MDPS_OUTY_L 0x2A /*r */
+#define MDPS_OUTY_H 0x2B /*r */
+#define MDPS_OUTZ_L 0x2C /*r */
+#define MDPS_OUTZ_H 0x2D /*r */
+#define MDPS_FF_WU_CFG 0x30 /*rw 00000000 */
+#define MDPS_FF_WU_SRC 0x31 /*rw 00000000 */
+#define MDPS_FF_WU_ACK 0x32 /*r */
+#define MDPS_FF_WU_THS_L 0x34 /*rw 00000000 */
+#define MDPS_FF_WU_THS_H 0x35 /*rw 00000000 */
+#define MDPS_FF_WU_DURATION 0x36 /*rw 00000000 */
+#define MDPS_DD_CFG 0x38 /*rw 00000000 */
+#define MDPS_DD_SRC 0x39 /*rw 00000000 */
+#define MDPS_DD_ACK 0x3A /*r */
+#define MDPS_DD_THSI_L 0x3C /*rw 00000000 */
+#define MDPS_DD_THSI_H 0x3D /*rw 00000000 */
+#define MDPS_DD_THSE_L 0x3E /*rw 00000000 */
+#define MDPS_DD_THSE_H 0x3F /*rw 00000000 */
+
+#define MDPS_ID 0x3A
+
+/* joystick device poll interval in milliseconds */
+#define MDPS_POLL_INTERVAL 30
+
+/* Maximum value our axis may get for the input device */
+#define MDPS_MAX_VAL 1024
+
+static unsigned int joystick = 1;
+module_param(joystick, bool, S_IRUGO);
+MODULE_PARM_DESC(joystick, "Enable the input device on module load");
+
+static unsigned int power_off;
+module_param(power_off, bool, S_IRUGO);
+MODULE_PARM_DESC(power_off, "Turn off device on module load");
+
+static unsigned int hdaps_compat;
+module_param(hdaps_compat, bool, S_IRUGO);
+MODULE_PARM_DESC(hdaps_compat, "Operate in hdaps compatibility mode");
+
+static unsigned int input_3d;
+module_param(input_3d, bool, S_IRUGO);
+MODULE_PARM_DESC(input_3d, "Operate as a 3D joystick instead of 2D");
+
+enum mdps_type {
+ MDPS_NC64x0,
+ MDPS_NX9420,
+};
+
+struct acpi_mdps
+{
+ struct acpi_device *device; /* The ACPI device */
+ u32 irq; /* IRQ number */
+ struct input_dev *idev; /* input device */
+ struct task_struct *kthread; /* kthread for input */
+ int xcalib; /* calibrated null value for x */
+ int ycalib; /* calibrated null value for y */
+ int zcalib; /* calibrated null value for z */
+ int is_on; /* whether the device is on or off */
+ struct platform_device *pdev; /* platform device */
+ atomic_t count; /* interrupt count after last read */
+ struct fasync_struct *async_queue;
+ atomic_t available; /* whether the device is open */
+ wait_queue_head_t misc_wait; /* Wait queue for the misc device */
+ enum mdps_type type;
+};
+
+static struct acpi_mdps mdps;
+
+static int mdps_add(struct acpi_device *device);
+static int mdps_remove(struct acpi_device *device, int type);
+static int mdps_suspend(struct acpi_device *device, pm_message_t state);
+static int mdps_resume(struct acpi_device *device);
+static int mdps_remove_fs(void);
+static int mdps_add_fs(struct acpi_device *device);
+static void mdps_joystick_enable(void);
+static void mdps_joystick_disable(void);
+
+static struct acpi_driver mdps_driver =
+{
+ .name = DRIVER_NAME,
+ .class = ACPI_MDPS_CLASS,
+ .ids = ACPI_MDPS_ID,
+ .ops = {
+ .add = mdps_add,
+ .remove = mdps_remove,
+#ifdef CONFIG_PM
+ .suspend = mdps_suspend,
+ .resume = mdps_resume
+#endif
+ }
+};
+
+/** Create a single value from 2 bytes received from the accelerometer
+ * @param hi the high byte
+ * @param lo the low byte
+ * @return the resulting value
+ */
+static inline s16 mdps_glue_bytes(unsigned long hi, unsigned long lo)
+{
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ if (hi & 0x10)
+ hi |= 0xE0;
+ return (s16)((hi << 8) | lo);
+}
+
+/** ACPI ALRD method: read a register
+ * @param handle the handle of the device
+ * @param reg the register to read
+ * @param[out] ret result of the operation
+ * @return AE_OK on success
+ */
+static acpi_status mdps_ALRD(acpi_handle handle, int reg,
+ unsigned long *ret)
+{
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list args = { 1, &arg0 };
+
+ arg0.integer.value = reg;
+
+ return acpi_evaluate_integer(handle, "ALRD", &args, ret);
+}
+
+/** ACPI _INI method: initialize the device.
+ * @param handle the handle of the device
+ * @return 0 on success
+ */
+static inline acpi_status mdps__INI(acpi_handle handle)
+{
+ return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL);
+}
+
+/** ACPI ALWR method: write to a register
+ * @param handle the handle of the device
+ * @param reg the register to write to
+ * @param val the value to write
+ * @param[out] ret result of the operation
+ * @return AE_OK on success
+ */
+static acpi_status mdps_ALWR(acpi_handle handle, int reg, int val,
+ unsigned long *ret)
+{
+ union acpi_object in_obj[2];
+ struct acpi_object_list args = { 2, in_obj };
+
+ in_obj[0].type = ACPI_TYPE_INTEGER;
+ in_obj[0].integer.value = reg;
+ in_obj[1].type = ACPI_TYPE_INTEGER;
+ in_obj[1].integer.value = val;
+
+ return acpi_evaluate_integer(handle, "ALWR", &args, ret);
+}
+
+/** Get X and Y axis values from the accelerometer
+ * @param handle the handle to the device
+ * @param[out] x where to store the X axis value
+ * @param[out] y where to store the Y axis value
+ */
+static void mdps_get_xy(acpi_handle handle, int *x, int *y)
+{
+ unsigned long x_lo, x_hi, y_lo, y_hi;
+
+ mdps_ALRD(mdps.device->handle, MDPS_OUTX_L, &x_lo);
+ mdps_ALRD(mdps.device->handle, MDPS_OUTX_H, &x_hi);
+ mdps_ALRD(mdps.device->handle, MDPS_OUTY_L, &y_lo);
+ mdps_ALRD(mdps.device->handle, MDPS_OUTY_H, &y_hi);
+
+ if (MDPS_NX9420 == mdps.type) {
+ /* On NX9420 X and Y axis seem to be swapped */
+ *y = mdps_glue_bytes(x_hi, x_lo);
+ *x = mdps_glue_bytes(y_hi, y_lo);
+ } else {
+ /* On NC6420 X is inverted */
+ *x = -mdps_glue_bytes(x_hi, x_lo);
+ *y = mdps_glue_bytes(y_hi, y_lo);
+ }
+}
+
+/** Get X, Y and Z axis values from the accelerometer
+ * @param handle the handle to the device
+ * @param[out] x where to store the X axis value
+ * @param[out] y where to store the Y axis value
+ * @param[out] z where to store the Z axis value
+ */
+static void mdps_get_xyz(acpi_handle handle, int *x, int *y, int *z)
+{
+ unsigned long z_lo, z_hi;
+
+ mdps_get_xy(mdps.device->handle, x, y);
+
+ mdps_ALRD(mdps.device->handle, MDPS_OUTZ_L, &z_lo);
+ mdps_ALRD(mdps.device->handle, MDPS_OUTZ_H, &z_hi);
+ *z = mdps_glue_bytes(z_hi, z_lo);
+}
+
+/** Kthread polling function
+ * @param data unused - here to conform to threadfn prototype
+ */
+static int mdps_joystick_kthread(void *data)
+{
+ int x = 0, y = 0, z = 0;
+
+ while (!kthread_should_stop()) {
+ if (input_3d) {
+ mdps_get_xyz(mdps.device->handle, &x, &y, &z);
+ input_report_abs(mdps.idev, ABS_Z, z - mdps.zcalib);
+ } else
+ mdps_get_xy(mdps.device->handle, &x, &y);
+
+ input_report_abs(mdps.idev, ABS_X, x - mdps.xcalib);
+ input_report_abs(mdps.idev, ABS_Y, y - mdps.ycalib);
+
+ input_sync(mdps.idev);
+
+ try_to_freeze();
+ msleep_interruptible(MDPS_POLL_INTERVAL);
+ }
+
+ return 0;
+}
+
+static inline void mdps_poweroff(acpi_handle handle)
+{
+ unsigned long ret;
+ mdps.is_on = 0;
+ /* disable X,Y,Z axis and power down */
+ mdps_ALWR(handle, MDPS_CTRL_REG1, 0x00, &ret);
+}
+
+static inline void mdps_poweron(acpi_handle handle)
+{
+ mdps.is_on = 1;
+ mdps__INI(handle);
+}
+
+#ifdef CONFIG_PM
+static int mdps_suspend(struct acpi_device *device, pm_message_t state)
+{
+ /* make sure the device is off when we suspend */
+ mdps_poweroff(mdps.device->handle);
+
+ return 0;
+}
+#endif
+
+static int mdps_resume(struct acpi_device *device)
+{
+ /* make sure the device went online */
+ mdps_poweron(mdps.device->handle);
+
+ return 0;
+}
+
+static irqreturn_t mdps_irq(int irq, void *dev_id)
+{
+ atomic_inc(&mdps.count);
+
+ wake_up_interruptible(&mdps.misc_wait);
+ kill_fasync(&mdps.async_queue, SIGIO, POLL_IN);
+
+ return IRQ_HANDLED;
+}
+
+static int mdps_misc_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ if (!atomic_dec_and_test(&mdps.available)) {
+ atomic_inc(&mdps.available);
+ return -EBUSY; /* already open */
+ }
+
+ atomic_set(&mdps.count, 0);
+
+ ret = request_irq(mdps.irq, mdps_irq, 0, "mdps", mdps_irq);
+ if (ret) {
+ printk(KERN_ERR "mdps: IRQ%d allocation failed\n", mdps.irq);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int mdps_misc_release(struct inode *inode, struct file *file)
+{
+ fasync_helper(-1, file, 0, &mdps.async_queue);
+
+ free_irq(mdps.irq, mdps_irq);
+
+ atomic_inc(&mdps.available); /* release the device */
+ return 0;
+}
+
+static ssize_t mdps_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ u32 data;
+ ssize_t retval = count;
+
+ if (count != sizeof(u32))
+ return -EINVAL;
+
+ add_wait_queue(&mdps.misc_wait, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = atomic_xchg(&mdps.count, 0);
+ if (data)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+
+ schedule();
+ }
+
+ if (copy_to_user(buf, &data, sizeof(data)))
+ retval = -EFAULT;
+
+out:
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&mdps.misc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int mdps_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &mdps.misc_wait, wait);
+
+ if (atomic_read(&mdps.count))
+ return POLLIN | POLLRDNORM;
+
+ return 0;
+}
+
+static int mdps_misc_fasync(int fd, struct file *file, int on)
+{
+ return fasync_helper(fd, file, on, &mdps.async_queue);
+}
+
+static const struct file_operations mdps_misc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = mdps_misc_read,
+ .open = mdps_misc_open,
+ .release = mdps_misc_release,
+ .poll = mdps_misc_poll,
+ .fasync = mdps_misc_fasync,
+};
+
+static struct miscdevice mdps_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "accel",
+ .fops = &mdps_misc_fops,
+};
+
+static acpi_status
+mdps_get_resource(struct acpi_resource *resource, void *context)
+{
+ if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+ struct acpi_resource_extended_irq *irq;
+ u32 *device_irq = context;
+
+ irq = &resource->data.extended_irq;
+ *device_irq = irq->interrupts[0];
+ }
+
+ return AE_OK;
+}
+
+static void mdps_enum_resources(struct acpi_device *device)
+{
+ acpi_status status;
+
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ mdps_get_resource, &mdps.irq);
+ if (ACPI_FAILURE(status))
+ printk(KERN_DEBUG "mdps: Error getting resources\n");
+}
+
+static int mdps_add(struct acpi_device *device)
+{
+ unsigned long val;
+ int ret;
+
+ if (!device)
+ return -EINVAL;
+
+ mdps.device = device;
+ strcpy(acpi_device_name(device), DRIVER_NAME);
+ strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
+ acpi_driver_data(device) = &mdps;
+
+ mdps_ALRD(device->handle, MDPS_WHO_AM_I, &val);
+ if (val != MDPS_ID) {
+ printk(KERN_ERR
+ "mdps: Accelerometer chip not LIS3LV02D{L,Q}\n");
+ return -ENODEV;
+ }
+
+ mdps_add_fs(device);
+ mdps_resume(device);
+
+ if (joystick)
+ mdps_joystick_enable();
+
+ /* obtain IRQ numer of our device from ACPI */
+ mdps_enum_resources(device);
+
+ if (power_off) /* see if user wanted to power off the device on load */
+ mdps_poweroff(mdps.device->handle);
+
+ /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ if (!mdps.irq) {
+ printk(KERN_INFO
+ "mdps: No IRQ in ACPI. Disabling /dev/accel\n");
+ return 0;
+ }
+
+ atomic_set(&mdps.available, 1); /* init the misc device open count */
+ init_waitqueue_head(&mdps.misc_wait);
+
+ ret = misc_register(&mdps_misc_device);
+ if (ret)
+ printk(KERN_ERR "mdps: misc_register failed\n");
+
+ return 0;
+}
+
+static int mdps_remove(struct acpi_device *device, int type)
+{
+ if (!device)
+ return -EINVAL;
+
+ if (mdps.irq)
+ misc_deregister(&mdps_misc_device);
+
+ mdps_joystick_disable();
+
+ return mdps_remove_fs();
+}
+
+static inline void mdps_calibrate_joystick(void)
+{
+ mdps_get_xyz(mdps.device->handle, &mdps.xcalib, &mdps.ycalib,
+ &mdps.zcalib);
+}
+
+static int mdps_joystick_open(struct input_dev *dev)
+{
+ mdps.kthread = kthread_run(mdps_joystick_kthread, NULL, "kmdps");
+ if (IS_ERR(mdps.kthread))
+ return PTR_ERR(mdps.kthread);
+
+ return 0;
+}
+
+static void mdps_joystick_close(struct input_dev *dev)
+{
+ kthread_stop(mdps.kthread);
+}
+
+static void mdps_joystick_enable(void)
+{
+ if (mdps.idev)
+ return;
+
+ mdps.idev = input_allocate_device();
+ if (!mdps.idev)
+ return;
+
+ mdps_calibrate_joystick();
+
+ mdps.idev->name = "HP Mobile Data Protection System";
+ mdps.idev->id.bustype = BUS_HOST;
+ mdps.idev->id.vendor = 0;
+ mdps.idev->cdev.dev = &mdps.pdev->dev;
+
+ set_bit(EV_ABS, mdps.idev->evbit);
+
+ input_set_abs_params(mdps.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 0);
+ input_set_abs_params(mdps.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 0);
+ if (input_3d)
+ input_set_abs_params(mdps.idev, ABS_Z, -MDPS_MAX_VAL,
+ MDPS_MAX_VAL, 3, 0);
+
+ mdps.idev->open = mdps_joystick_open;
+ mdps.idev->close = mdps_joystick_close;
+
+ if (input_register_device(mdps.idev)) {
+ input_free_device(mdps.idev);
+ mdps.idev = NULL;
+ }
+}
+
+static void mdps_joystick_disable(void)
+{
+ if (!mdps.idev)
+ return;
+
+ input_unregister_device(mdps.idev);
+ mdps.idev = NULL;
+}
+
+/* Sysfs stuff */
+static ssize_t mdps_position_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int x, y;
+ mdps_get_xy(mdps.device->handle, &x, &y);
+
+ if (hdaps_compat) { /* mdps is 10 times more sensitive than hdaps */
+ x /= 10;
+ y /= 10;
+ }
+
+ return sprintf(buf, "(%d,%d)\n", x, y);
+}
+
+static ssize_t mdps_position3d_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int x, y, z;
+ mdps_get_xyz(mdps.device->handle, &x, &y, &z);
+
+ return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
+}
+
+static ssize_t mdps_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", (mdps.is_on ? "on" : "off"));
+}
+
+static ssize_t mdps_input_show_joystick(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", (joystick ? "enabled" : "disabled"));
+}
+
+static ssize_t mdps_input_store_joystick(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int state;
+ if (sscanf(buf, "%d", &state) != 1 || (state != 1 && state != 0))
+ return -EINVAL;
+
+ joystick = state;
+
+ if (joystick)
+ mdps_joystick_enable();
+ else
+ mdps_joystick_disable();
+
+ return count;
+}
+
+static ssize_t mdps_calibrate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (input_3d)
+ return sprintf(buf, "(%d,%d,%d)\n", mdps.xcalib, mdps.ycalib,
+ mdps.zcalib);
+
+ return sprintf(buf, "(%d,%d)\n", mdps.xcalib, mdps.ycalib);
+}
+
+static ssize_t mdps_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ mdps_calibrate_joystick();
+ return count;
+}
+
+static ssize_t mdps_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long ctrl;
+ int rate = 0;
+
+ mdps_ALRD(mdps.device->handle, MDPS_CTRL_REG1, &ctrl);
+
+ /* get the sampling rate of the accelerometer in HZ */
+ switch ((ctrl & 0x30) >> 4)
+ {
+ case 00:
+ rate = 40;
+ break;
+
+ case 01:
+ rate = 160;
+ break;
+
+ case 02:
+ rate = 640;
+ break;
+
+ case 03:
+ rate = 2560;
+ break;
+ }
+
+ return sprintf(buf, "%d\n", rate);
+}
+
+static ssize_t mdps_state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int state;
+ if (sscanf(buf, "%d", &state) != 1 || (state != 1 && state != 0))
+ return -EINVAL;
+
+ mdps.is_on = state;
+
+ if (mdps.is_on)
+ mdps_poweron(mdps.device->handle);
+ else
+ mdps_poweroff(mdps.device->handle);
+
+ return count;
+}
+
+static DEVICE_ATTR(position, S_IRUGO, mdps_position_show, NULL);
+static DEVICE_ATTR(position3d, S_IRUGO, mdps_position3d_show, NULL);
+static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, mdps_calibrate_show,
+ mdps_calibrate_store);
+static DEVICE_ATTR(rate, S_IRUGO, mdps_rate_show, NULL);
+static DEVICE_ATTR(state, S_IRUGO|S_IWUSR, mdps_state_show, mdps_state_store);
+static DEVICE_ATTR(joystick, S_IRUGO|S_IWUSR, mdps_input_show_joystick,
+ mdps_input_store_joystick);
+
+static struct attribute *mdps_attributes[] = {
+ &dev_attr_position.attr,
+ &dev_attr_position3d.attr,
+ &dev_attr_calibrate.attr,
+ &dev_attr_rate.attr,
+ &dev_attr_state.attr,
+ &dev_attr_joystick.attr,
+ NULL
+};
+
+static struct attribute_group mdps_attribute_group = {
+ .attrs = mdps_attributes
+};
+
+static int mdps_add_fs(struct acpi_device *device)
+{
+ char *name = DRIVER_NAME;
+
+ if (hdaps_compat)
+ name = "hdaps";
+
+ mdps.pdev = platform_device_register_simple(name, -1, NULL, 0);
+ if (IS_ERR(mdps.pdev))
+ return PTR_ERR(mdps.pdev);
+
+ return sysfs_create_group(&mdps.pdev->dev.kobj, &mdps_attribute_group);
+}
+
+static int mdps_remove_fs(void)
+{
+ sysfs_remove_group(&mdps.pdev->dev.kobj, &mdps_attribute_group);
+ platform_device_unregister(mdps.pdev);
+ return 0;
+}
+
+struct mdps_id {
+ acpi_string path;
+ enum mdps_type type;
+};
+
+static struct mdps_id mdps_devices[] __initdata = {
+ {"\\_SB.C002.ACEL", MDPS_NC64x0},
+ {"\\_SB.C003.ACEL", MDPS_NX9420},
+ { }
+};
+
+static int __init mdps_init_module(void)
+{
+ int ret, device_found;
+ unsigned int i;
+ acpi_status status;
+ acpi_handle handle = 0;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ /* see if our device is present in ACPI */
+ device_found = 0;
+ for (i = 0; mdps_devices[i].path; ++i) {
+ status = acpi_get_handle(NULL, mdps_devices[i].path, &handle);
+ if (ACPI_SUCCESS(status)) {
+ mdps.type = mdps_devices[i].type;
+ device_found = 1;
+ break;
+ }
+ }
+
+ if (!device_found) {
+ printk(KERN_ERR
+ "mdps: HP Mobile Data Protection System 3D not found\n");
+ return -ENODEV;
+ }
+
+ ret = acpi_bus_register_driver(&mdps_driver);
+ if (ret < 0)
+ return ret;
+
+ printk(KERN_INFO "mdps: (" VERSION ") loaded.\n");
+
+ return 0;
+}
+
+static void __exit mdps_exit_module(void)
+{
+ acpi_bus_unregister_driver(&mdps_driver);
+}
+
+MODULE_DESCRIPTION("HP three-axis digital accelerometer ACPI driver");
+MODULE_AUTHOR("Yan Burman (burman.yan@...il.com)");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+
+module_init(mdps_init_module);
+module_exit(mdps_exit_module);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists