linux-kernel - Re: drivers/pci/probe.c patch in 2.6.20.4 causes 'cannot adjust BAR0 (not I/O)' on NVidia MCP51

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <64bb37e0703251113v4d4e6acdg92faf6722e9bc2df@mail.gmail.com>
Date:	Sun, 25 Mar 2007 19:13:50 +0100
From:	"Torsten Kaiser" <just.for.lkml@...glemail.com>
To:	"Gabriel C" <nix.or.die@...glemail.com>
Cc:	"Kevin P. Fleming" <lkml@...leming.us>,
	linux-kernel@...r.kernel.org, "Alan Cox" <alan@...hat.com>,
	"Jan Beulich" <jbeulich@...ell.com>,
	"Andrew Morton" <akpm@...ux-foundation.org>
Subject: Re: drivers/pci/probe.c patch in 2.6.20.4 causes 'cannot adjust BAR0 (not I/O)' on NVidia MCP51

On 3/25/07, Gabriel C <nix.or.die@...glemail.com> wrote:
> Kevin P. Fleming wrote:
> > I just upgraded from 2.6.20.2 to 2.6.20.4 on my Compaq V6000 laptop,
> > which has an NVidia core chipset. It has the MCP51 and uses it for PATA
> > and SATA.
> >
> > Booting the 2.6.20.4 kernel causes two messages (and a kernel lockup)
> > like this:
> >
> > 0000:00:0d.0: cannot adjust BAR0 (not I/O)
> > 0000:00:0d.0: cannot adjust BAR1 (not I/O)
> >
> [   18.754623] Enabling SiS 96x SMBus.
> [   18.754812] 0000:00:02.5: cannot adjust BAR0 (not I/O)
> [   18.754816] 0000:00:02.5: cannot adjust BAR1 (not I/O)
> [   18.754819] 0000:00:02.5: cannot adjust BAR2 (not I/O)
> [   18.754822] 0000:00:02.5: cannot adjust BAR3 (not I/O)

I am seeing this also, but on a MCP55

Mar 25 18:56:37 treogen [   50.828369] 0000:00:04.0: cannot adjust
BAR0 (not I/O)
Mar 25 18:56:37 treogen [   50.843736] 0000:00:04.0: cannot adjust
BAR1 (not I/O)
Mar 25 18:56:37 treogen [   50.859120] 0000:00:04.0: cannot adjust
BAR2 (not I/O)
Mar 25 18:56:37 treogen [   50.874504] 0000:00:04.0: cannot adjust
BAR3 (not I/O)


00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if
8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Unknown device 81f0
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
        I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 f0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01

I am not using the IDE interface so I can't tell if it is working or
not, but the boot does not hang.

Torsten
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/