| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070327190248.01bc7e5c@the-village.bc.nu>
Date: Tue, 27 Mar 2007 19:02:48 +0100
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: Testing patch for ALi PATA - fixes hopefully for the problems with
ATAPI DMA
This implements two things at driver level which are implemented
implicitly by the old IDE layer
- Only doing sector sized ATAPI I/O via DMA
- Alway writing the size values
Hopefully this will make CD devices behave better for those with the
problems. If you can test both the detection and mounting/reading of a CD
works nicely that would be great, and then if you can see whether it is
the size check or the use of ali_tf_load v ata_tf_load that fixes it this
would be ideal.
Currently I don't have an ALi device with the problem so its a bit hard
to debug.
Alan
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc4-mm1/drivers/ata/pata_ali.c linux-2.6.21-rc4-mm1/drivers/ata/pata_ali.c
--- linux.vanilla-2.6.21-rc4-mm1/drivers/ata/pata_ali.c 2007-03-23 11:49:49.000000000 +0000
+++ linux-2.6.21-rc4-mm1/drivers/ata/pata_ali.c 2007-03-27 17:42:30.759952688 +0100
@@ -233,8 +233,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (adev->class == ATA_DEV_ATA)
- ali_fifo_control(ap, adev, 0x08);
+/* if (adev->class == ATA_DEV_ATA)
+ ali_fifo_control(ap, adev, 0x08); */
if (adev->dma_mode >= XFER_UDMA_0) {
ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]);
@@ -275,6 +275,77 @@
adev->max_sectors = 255;
}
+/**
+ * ali_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller. We can't
+ * use the default one as the onboard FIFO logic requires that we
+ * write all the registers (see 1535 BIOS programming guide)
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ali_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ iowrite8(tf->hob_feature, ioaddr->feature_addr);
+ iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+ iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+ iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+ iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+ if (is_addr) {
+ iowrite8(tf->feature, ioaddr->feature_addr);
+ iowrite8(tf->nsect, ioaddr->nsect_addr);
+ iowrite8(tf->lbal, ioaddr->lbal_addr);
+ iowrite8(tf->lbam, ioaddr->lbam_addr);
+ iowrite8(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ } else {
+ iowrite8(0, ioaddr->feature_addr);
+ iowrite8(0, ioaddr->nsect_addr);
+ iowrite8(0, ioaddr->lbal_addr);
+ iowrite8(0, ioaddr->lbam_addr);
+ iowrite8(0, ioaddr->lbah_addr);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ iowrite8(tf->device, ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ /* Don't do DMA except for whole blocks */
+ if (qc->nbytes & 511)
+ return -1;
+ return 0;
+}
+
static struct scsi_host_template ali_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -304,7 +375,7 @@
static struct ata_port_operations ali_early_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = ali_set_piomode,
- .tf_load = ata_tf_load,
+ .tf_load = ali_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
@@ -318,6 +389,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .check_atapi_dma= ali_check_atapi_dma,
.data_xfer = ata_data_xfer,
@@ -340,7 +412,7 @@
.set_dmamode = ali_set_dmamode,
.mode_filter = ali_20_filter,
- .tf_load = ata_tf_load,
+ .tf_load = ali_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
@@ -360,6 +432,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .check_atapi_dma= ali_check_atapi_dma,
.data_xfer = ata_data_xfer,
@@ -379,7 +452,7 @@
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
.mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
+ .tf_load = ali_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
@@ -399,6 +472,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .check_atapi_dma= ali_check_atapi_dma,
.data_xfer = ata_data_xfer,
@@ -418,7 +492,7 @@
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
.mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
+ .tf_load = ali_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
@@ -437,6 +511,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .check_atapi_dma= ali_check_atapi_dma,
.data_xfer = ata_data_xfer,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists