| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a44ae5cd0703281355h13f1bd70s9eb94092bfa9c3e@mail.gmail.com> Date: Wed, 28 Mar 2007 13:55:54 -0700 From: "Miles Lane" <miles.lane@...il.com> To: "Andrew Morton" <akpm@...l.org>, LKML <linux-kernel@...r.kernel.org>, "Andy Grover" <andrew.grover@...el.com>, "Paul Diefenbaugh" <paul.s.diefenbaugh@...el.com>, len.brown@...el.com Subject: 2.6.21-rc5-mm2 -- ACPI problems (lid switch broken, always shows running from AC, plugging in AC hangs machine) Hello, My laptop (HP dv1240us) is always showing that my laptop is plugged into AC power, even when it is running off of the battery. When I plug into the AC after running on the battery, the machine immediately locks up. Also, the laptop lid button isn't working -- pressing it doesn't trigger a suspend. # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=m # CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=2000 CONFIG_ACPI_DEBUG=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m CONFIG_ACPI_SBS=m CONFIG_APM=m # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_SPEEDSTEP_ICH=m CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y # # CPU idle PM support # # CONFIG_CPU_IDLE is not set [ 0.000000] Linux version 2.6.21-rc5-mm2 (root@...ctalPath) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #7 Wed Mar 28 10:55:43 PDT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000ce000 size: 0000000000002000 end: 00000000000d0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003dde0000 end: 000000003dee0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003dee0000 size: 000000000000c000 end: 000000003deec000 type: 3 [ 0.000000] copy_e820_map() start: 000000003deec000 size: 0000000000014000 end: 000000003df00000 type: 4 [ 0.000000] copy_e820_map() start: 000000003df00000 size: 0000000002100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dee0000 (usable) [ 0.000000] BIOS-e820: 000000003dee0000 - 000000003deec000 (ACPI data) [ 0.000000] BIOS-e820: 000000003deec000 - 000000003df00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003df00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] 94MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7e30 [ 0.000000] Entering add_active_range(0, 0, 253664) 0 entries of 256 used [ 0.000000] sizeof(struct page) = 32 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253664 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253664 [ 0.000000] On node 0 totalpages: 253664 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 189 pages used for memmap [ 0.000000] HighMem zone: 24099 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7E00, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 3DEE76BB, 0040 (r1 HP 09B8 6040000 LTP 0) [ 0.000000] ACPI: FACP 3DEEBE8C, 0074 (r1 HP 09B8 6040000 PTL 50) [ 0.000000] ACPI: DSDT 3DEE7B9A, 42F2 (r1 HP 09B8 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3DEFCFC0, 0040 [ 0.000000] ACPI: HPET 3DEEBF00, 0038 (r1 HP 09B8 6040000 PTL 0) [ 0.000000] ACPI: APIC 3DEEBF38, 005A (r1 HP 09B8 6040000 PTL 50) [ 0.000000] ACPI: APIC 3DEEBF92, 0046 (r1 HP 09B8 6040000 PTL 0) [ 0.000000] ACPI: BOOT 3DEEBFD8, 0028 (r1 HP 09B8 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3DEE7AFE, 009C (r1 HP 09B8 1 INTL 20030224) [ 0.000000] ACPI: SSDT 3DEE76FB, 0277 (r1 HP 09B8 2000 INTL 20030224) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 2 [ 0.000000] ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi@...r.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 251683 [ 0.000000] Kernel command line: root=UUID=47a91ab9-c44b-4802-8012-5748803bb3ef pci=assign-busses vga=0x27e ro splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1695.771 MHz processor. [ 57.648280] Console: colour VGA+ 80x60 [ 57.653235] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 57.653359] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 57.653435] ... MAX_LOCK_DEPTH: 30 [ 57.653512] ... MAX_LOCKDEP_KEYS: 2048 [ 57.653588] ... CLASSHASH_SIZE: 1024 [ 57.653665] ... MAX_LOCKDEP_ENTRIES: 8192 [ 57.653742] ... MAX_LOCKDEP_CHAINS: 16384 [ 57.653819] ... CHAINHASH_SIZE: 8192 [ 57.653896] memory used by lock dependency info: 992 kB [ 57.653975] per task-struct memory footprint: 1200 bytes [ 57.654496] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 57.655077] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 57.693759] Memory: 996500k/1014656k available (1671k kernel code, 17420k reserved, 885k data, 176k init, 97152k highmem) [ 57.693898] virtual kernel memory layout: [ 57.693899] fixmap : 0xfff9c000 - 0xfffff000 ( 396 kB) [ 57.693901] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 57.693902] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 57.693903] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 57.693905] .init : 0xc0382000 - 0xc03ae000 ( 176 kB) [ 57.693906] .data : 0xc02a1e0c - 0xc037f4b4 ( 885 kB) [ 57.693907] .text : 0xc0100000 - 0xc02a1e0c (1671 kB) [ 57.694526] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 57.778324] Calibrating delay using timer specific routine.. 3394.89 BogoMIPS (lpj=5655824) [ 57.778624] Security Framework v1.0.0 initialized [ 57.778705] SELinux: Disabled at boot. [ 57.778824] Mount-cache hash table entries: 512 [ 57.779471] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 [ 57.779483] CPU: L1 I cache: 32K, L1 D cache: 32K [ 57.779590] CPU: L2 cache: 2048K [ 57.779665] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 [ 57.779672] Intel machine check architecture supported. [ 57.779754] Intel machine check reporting enabled on CPU#0. [ 57.779837] Compat vDSO mapped to ffffe000. [ 57.779923] CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 [ 57.780061] Checking 'hlt' instruction... OK. [ 57.791759] ACPI: Core revision 20070126 [ 57.801182] Parsing all Control Methods: [ 57.801363] Table [DSDT](id 0001) - 654 Objects with 50 Devices 163 Methods 17 Regions [ 57.801622] Parsing all Control Methods: [ 57.801761] Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 57.802103] Parsing all Control Methods: [ 57.802243] Table [SSDT](id 0003) - 6 Objects with 0 Devices 3 Methods 0 Regions [ 57.802433] tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired [ 57.876949] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 57.877622] ENABLING IO-APIC IRQs [ 57.877901] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 58.015431] NET: Registered protocol family 16 [ 58.016104] ACPI: bus type pci registered [ 58.017441] PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2 [ 58.017523] PCI: Using configuration type 1 [ 58.017599] Setting up standard PCI resources [ 58.038873] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 58.043249] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block [ 58.045984] Completing Region/Field/Buffer/Package initialization:..................................................... [ 58.066979] Initialized 17/17 Regions 0/0 Fields 22/22 Buffers 14/23 Packages (670 nodes) [ 58.067181] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 58.068782] Executed 1 _INI methods requiring 0 _STA executions (examined 54 objects) [ 58.069405] ACPI: Interpreter enabled [ 58.069491] ACPI: (supports S0 S3 S4 S5) [ 58.070114] ACPI: Using IOAPIC for interrupt routing [ 60.181724] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 60.182937] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 60.183021] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 60.183189] 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0 [ 60.183272] 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4 [ 60.183355] 0000:00:1f.1: trying to change BAR2 from 0000 to 0170 [ 60.183438] 0000:00:1f.1: trying to change BAR3 from 0000 to 0374 [ 60.184541] PCI: Transparent bridge - 0000:00:1e.0 [ 60.184927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 60.185741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 60.203605] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [ 60.204097] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 60.204582] ACPI: PCI Interrupt Link [LNKC] (IRQs *4) [ 60.205113] ACPI: PCI Interrupt Link [LNKD] (IRQs *3) [ 60.205613] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 60.206099] ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled. [ 60.206643] ACPI: PCI Interrupt Link [LNKG] (IRQs *4) [ 60.207127] ACPI: PCI Interrupt Link [LNKH] (IRQs *3) [ 60.207663] Linux Plug and Play Support v0.97 (c) Adam Belay [ 60.207789] pnp: PnP ACPI init [ 61.209150] [ACPI Debug] String: [0x1C] "Temperature increasing: _Q80" [ 61.212569] pnp: PnP ACPI: found 7 devices [ 61.215195] PCI: Using ACPI for IRQ routing [ 61.215272] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 61.221489] pnp: 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved [ 61.223047] Time: tsc clocksource has been installed. [ 61.254320] PCI: Bus 2, cardbus bridge: 0000:01:09.0 [ 61.254399] IO window: 00003400-000034ff [ 61.254478] IO window: 00003800-000038ff [ 61.254558] PREFETCH window: 50000000-53ffffff [ 61.254639] MEM window: 58000000-5bffffff [ 61.254718] PCI: Bridge: 0000:00:1e.0 [ 61.254795] IO window: 3000-3fff [ 61.254875] MEM window: e0200000-e02fffff [ 61.254955] PREFETCH window: 50000000-53ffffff [ 61.255047] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 61.255069] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 61.255275] NET: Registered protocol family 2 [ 61.286400] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 61.286930] TCP established hash table entries: 65536 (order: 9, 2883584 bytes) [ 61.294850] TCP bind hash table entries: 65536 (order: 9, 2883584 bytes) [ 61.304630] TCP: Hash tables configured (established 65536 bind 65536) [ 61.304775] TCP reno registered [ 61.314210] Unpacking initramfs... done [ 61.540219] Freeing initrd memory: 3143k freed [ 61.540720] Simple Boot Flag at 0x36 set to 0x1 [ 61.542835] audit: initializing netlink socket (disabled) [ 61.542981] audit(1175081081.359:1): initialized [ 61.543489] highmem bounce pool size: 64 pages [ 61.543977] VFS: Disk quotas dquot_6.5.1 [ 61.544069] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 61.544412] io scheduler noop registered [ 61.544508] io scheduler cfq registered (default) [ 61.544613] Boot video device is 0000:00:02.0 [ 61.567170] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 61.569794] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 61.569955] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 61.571055] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12 [ 61.573460] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 61.573548] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 61.574073] mice: PS/2 mouse device common for all mice [ 61.574704] async_tx: api initialized (async) [ 61.574782] xor: automatically using best checksumming function: pIII_sse [ 61.589151] pIII_sse : 4524.000 MB/sec [ 61.589228] xor: using function: pIII_sse (4524.000 MB/sec) [ 61.589461] TCP cubic registered [ 61.589564] NET: Registered protocol family 1 [ 61.589651] Using IPI Shortcut mode [ 61.590694] Freeing unused kernel memory: 176k freed [ 61.590865] Write protecting the kernel read-only data: 676k [ 61.623774] input: AT Translated Set 2 keyboard as /class/input/input0 [ 61.705748] [ACPI Debug] String: [0x1C] "Temperature increasing: _Q80" [ 61.755589] Switched to high resolution mode on CPU 0 [ 63.010750] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 63.510190] [ACPI Debug] String: [0x11] "Current temp is: " [ 63.510212] [ACPI Debug] Integer: 0x00000040 [ 64.009511] [ACPI Debug] String: [0x11] "Current temp is: " [ 64.009531] [ACPI Debug] Integer: 0x00000040 [ 64.009641] ACPI: Thermal Zone [THRM] (64 C) [ 64.332671] usbcore: registered new interface driver usbfs [ 64.332794] usbcore: registered new interface driver hub [ 64.333180] usbcore: registered new device driver usb [ 64.334334] USB Universal Host Controller Interface driver v3.0 [ 64.334483] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 64.334507] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 64.334512] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 64.334889] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 64.334939] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 64.335109] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 64.335112] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 64.335116] usb usb1: Product: UHCI Host Controller [ 64.335118] usb usb1: Manufacturer: Linux 2.6.21-rc5-mm2 uhci_hcd [ 64.335121] usb usb1: SerialNumber: 0000:00:1d.0 [ 64.335545] usb usb1: configuration #1 chosen from 1 choice [ 64.335694] hub 1-0:1.0: USB hub found [ 64.335812] hub 1-0:1.0: 2 ports detected [ 64.343404] 8139too Fast Ethernet driver 0.9.28 [ 64.353232] ieee1394: Initialized config rom entry `ip1394' [ 64.401839] SCSI subsystem initialized [ 64.407421] libata version 2.20 loaded. [ 64.439323] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 64.439351] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 64.439356] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 64.439482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 64.439536] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 64.439707] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 64.439711] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 64.439714] usb usb2: Product: UHCI Host Controller [ 64.439716] usb usb2: Manufacturer: Linux 2.6.21-rc5-mm2 uhci_hcd [ 64.439719] usb usb2: SerialNumber: 0000:00:1d.1 [ 64.440075] usb usb2: configuration #1 chosen from 1 choice [ 64.440214] hub 2-0:1.0: USB hub found [ 64.440236] hub 2-0:1.0: 2 ports detected [ 64.547839] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 64.547865] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 64.547870] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 64.548007] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 64.548064] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 64.548211] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 64.548214] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 64.548218] usb usb3: Product: UHCI Host Controller [ 64.548220] usb usb3: Manufacturer: Linux 2.6.21-rc5-mm2 uhci_hcd [ 64.548222] usb usb3: SerialNumber: 0000:00:1d.2 [ 64.548543] usb usb3: configuration #1 chosen from 1 choice [ 64.548684] hub 3-0:1.0: USB hub found [ 64.548706] hub 3-0:1.0: 2 ports detected [ 64.649153] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 64.649179] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 64.649184] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 64.649305] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 64.649405] ehci_hcd 0000:00:1d.7: debug port 1 [ 64.649413] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 64.649431] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000 [ 64.653321] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 64.653410] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 64.653413] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 64.653416] usb usb4: Product: EHCI Host Controller [ 64.653418] usb usb4: Manufacturer: Linux 2.6.21-rc5-mm2 ehci_hcd [ 64.653420] usb usb4: SerialNumber: 0000:00:1d.7 [ 64.653769] usb usb4: configuration #1 chosen from 1 choice [ 64.653921] hub 4-0:1.0: USB hub found [ 64.653987] hub 4-0:1.0: 6 ports detected [ 64.756012] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 64.756623] eth0: RealTek RTL8139 at 0xf884a800, 00:c0:9f:95:18:1b, IRQ 16 [ 64.756626] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 64.756813] ACPI: PCI Interrupt 0000:01:09.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 64.824200] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e0207000-e02077ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 64.824408] ata_piix 0000:00:1f.1: version 2.10ac1 [ 64.824431] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 64.824441] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 64.824481] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 64.826262] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 64.826500] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 64.826541] scsi0 : ata_piix [ 64.985031] ata1.00: ATA-6: FUJITSU MHU2100AT, 00000008, max UDMA/100 [ 64.985035] ata1.00: 195371568 sectors, multi 16: LBA [ 64.991676] ata1.00: configured for UDMA/100 [ 64.991687] scsi1 : ata_piix [ 65.304593] ata2.00: ATAPI, max UDMA/33 [ 65.464372] ata2.00: configured for UDMA/33 [ 65.464829] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHU2100A 0000 PQ: 0 ANSI: 5 [ 65.470205] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4080N 0S35 PQ: 0 ANSI: 5 [ 65.499844] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 65.499966] sd 0:0:0:0: [sda] Write Protect is off [ 65.500045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 65.500099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.500431] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 65.500540] sd 0:0:0:0: [sda] Write Protect is off [ 65.500619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 65.500674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.500835] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > [ 66.025799] sd 0:0:0:0: [sda] Attached SCSI disk [ 66.036659] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 66.041191] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 66.074746] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 66.074878] Uniform CD-ROM driver Revision: 3.20 [ 66.075191] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 66.093784] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00004fec18] [ 66.930058] Attempting manual resume [ 66.957700] EXT3-fs: INFO: recovery required on readonly filesystem. [ 66.957788] EXT3-fs: write access will be enabled during recovery. [ 70.600696] [ACPI Debug] String: [0x1C] "Temperature increasing: _Q80" [ 71.099947] [ACPI Debug] String: [0x11] "Current temp is: " [ 71.100101] [ACPI Debug] Integer: 0x0000003B [ 71.599282] [ACPI Debug] String: [0x1C] "Temperature increasing: _Q80" [ 72.098616] [ACPI Debug] String: [0x11] "Current temp is: " [ 72.098777] [ACPI Debug] Integer: 0x0000003B [ 73.220486] kjournald starting. Commit interval 5 seconds [ 73.595518] EXT3-fs: mounted filesystem with ordered data mode. [ 91.722734] IPv4 FIB: Using LC-trie version 0.407 [ 92.953555] Linux agpgart interface v0.102 (c) Dave Jones [ 93.050389] agpgart: Detected an Intel 855 Chipset. [ 93.051364] agpgart: Detected 32636K stolen memory. [ 93.062734] agpgart: AGP aperture is 128M @ 0xe8000000 [ 93.151484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 93.176187] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 93.190053] iTCO_vendor_support: vendor-support=0 [ 93.191528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 93.191946] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 93.192230] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 93.316838] Real Time Clock Driver v1.12ac [ 93.363658] intel_rng: FWH not detected [ 93.396467] ieee80211_crypt: registered algorithm 'NULL' [ 93.412614] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 93.412703] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@...ux.intel.com> [ 93.453208] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kdmprq [ 93.453338] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 93.454065] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 93.485935] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 93.639978] sdhci: Secure Digital Host Controller Interface driver [ 93.640070] sdhci: Copyright(c) Pierre Ossman [ 93.912114] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 [ 93.943409] input: SynPS/2 Synaptics TouchPad as /class/input/input1 [ 94.396392] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 94.396769] Yenta: CardBus bridge found at 0000:01:09.0 [103c:3080] [ 94.396869] Yenta: Enabling burst memory read transactions [ 94.396951] Yenta: Using CSCINT to route CSC interrupts to PCI [ 94.397030] Yenta: Routing CardBus interrupts to PCI [ 94.397112] Yenta TI: socket 0000:01:09.0, mfunc 0x01a01b22, devctl 0x64 [ 94.625731] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 94.625816] Socket status: 30000006 [ 94.625900] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 94.626005] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 94.626089] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 94.630308] ACPI: PCI Interrupt 0000:01:09.3[A] -> GSI 20 (level, low) -> IRQ 20 [ 94.648973] sdhci: SDHCI controller found at 0000:01:09.4 [104c:8034] (rev 0) [ 94.649083] ACPI: PCI Interrupt 0000:01:09.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 94.649524] mmc0: SDHCI at 0xe0208400 irq 20 DMA [ 94.649745] mmc1: SDHCI at 0xe0208000 irq 20 DMA [ 94.649981] mmc2: SDHCI at 0xe0207c00 irq 20 DMA [ 94.650192] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 94.650389] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 94.964469] intel8x0_measure_ac97_clock: measured 50171 usecs [ 94.964556] intel8x0: clocking to 48000 [ 95.251403] lp: driver loaded but no devices found [ 95.348575] fuse init (API version 7.8) [ 95.404135] Adding 1052216k swap on /dev/disk/by-uuid/f5d0cec6-779a-4035-bb7b-9a0837ac3e66. Priority:-1 extents:1 across:1052216k [ 95.711279] EXT3 FS on sda11, internal journal [ 117.771965] kjournald starting. Commit interval 5 seconds [ 117.772356] EXT3 FS on sda10, internal journal [ 117.772366] EXT3-fs: mounted filesystem with ordered data mode. [ 117.996602] kjournald starting. Commit interval 5 seconds [ 118.000404] EXT3 FS on sda6, internal journal [ 118.000414] EXT3-fs: mounted filesystem with ordered data mode. [ 118.028237] kjournald starting. Commit interval 5 seconds [ 118.028711] EXT3 FS on sda7, internal journal [ 118.028719] EXT3-fs: mounted filesystem with ordered data mode. [ 118.032497] kjournald starting. Commit interval 5 seconds [ 118.032897] EXT3 FS on sda9, internal journal [ 118.032905] EXT3-fs: mounted filesystem with ordered data mode. [ 122.294327] ACPI: AC Adapter [ACAD] (on-line) [ 124.381468] ACPI: Battery Slot [BAT0] (battery present) [ 124.401835] input: Power Button (FF) as /class/input/input2 [ 124.402332] ACPI: Power Button (FF) [PWRF] [ 124.404691] input: Lid Switch as /class/input/input3 [ 124.404790] ACPI: Lid Switch [LID0] [ 124.404993] input: Sleep Button (CM) as /class/input/input4 [ 124.405084] ACPI: Sleep Button (CM) [SLPB] [ 126.529386] No dock devices found. [ 126.585634] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 126.606239] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 130.847807] Capability LSM initialized [ 130.891859] eth0: link down [ 133.317897] [drm] Initialized drm 1.1.0 20060810 [ 133.323604] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 133.326885] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 133.330064] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 134.373854] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 77.413325] Marking TSC unstable due to: cpufreq changes. [ 77.416658] Time: acpi_pm clocksource has been installed. [ 77.889992] Clocksource tsc unstable (delta = -312378109 ns) [ 108.756655] NET: Registered protocol family 10 [ 108.756655] lo: Disabled Privacy Extensions [ 108.756655] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 118.973321] eth1: no IPv6 routers present 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: [40] Vendor Specific Information 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1800 [size=8] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=05, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e0200000-e02fffff Prefetchable memory behind bridge: 50000000-53ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Region 5: Memory at 54000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 1880 [size=32] 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at e0207800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Subsystem: Hewlett-Packard Company Unknown device 12f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 01:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0209000 (32-bit, non-prefetchable) [size=4K] Bus: primary=01, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 58000000-5bfff000 I/O window 0: 00003400-000034ff I/O window 1: 00003800-000038ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 01:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 01:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:09.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller Subsystem: Hewlett-Packard Company Unknown device 3080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0208400 (32-bit, non-prefetchable) [size=256] Region 1: Memory at e0208000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at e0207c00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists