-stable review patch. If anyone has any objections, please let us know. ------------------ From: Jeff Garzik [libata] sata_mv: don't touch reserved bits in EDMA config register The code in mv_edma_cfg() reflected its 60xx origins, by doing things [slightly] incorrectly on the older 50xx and newer 6042/7042 chips. Clean up the EDMA configuration setup such that, each chip family carefully initializes its own EDMA setup. Cc: Chuck Ebbert Signed-off-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman --- drivers/ata/sata_mv.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -843,23 +843,27 @@ static void mv_edma_cfg(struct mv_host_p u32 cfg = readl(port_mmio + EDMA_CFG_OFS); /* set up non-NCQ EDMA configuration */ - cfg &= ~0x1f; /* clear queue depth */ - cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ cfg &= ~(1 << 9); /* disable equeue */ - if (IS_GEN_I(hpriv)) + if (IS_GEN_I(hpriv)) { + cfg &= ~0x1f; /* clear queue depth */ cfg |= (1 << 8); /* enab config burst size mask */ + } - else if (IS_GEN_II(hpriv)) + else if (IS_GEN_II(hpriv)) { + cfg &= ~0x1f; /* clear queue depth */ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */ + } else if (IS_GEN_IIE(hpriv)) { - cfg |= (1 << 23); /* dis RX PM port mask */ - cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ + cfg |= (1 << 22); /* enab 4-entry host queue cache */ cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ cfg |= (1 << 18); /* enab early completion */ - cfg |= (1 << 17); /* enab host q cache */ - cfg |= (1 << 22); /* enab cutthrough */ + cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */ + cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */ } writelfl(cfg, port_mmio + EDMA_CFG_OFS); -- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/