| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Apr 2007 14:05:19 -0400
From: Tony Lindgren <tony@...mide.com>
To: linux-kernel@...r.kernel.org
Cc: Tony Lindgren <tony@...mide.com>
Subject: [PATCH 40/90] ARM: OMAP: Sync board specific files with linux-omap
This patch syncs omap board specific files with linux-omap.
Patch consists mostly of driver updates done in linux-omap
tree for drivers not yet in mainline kernel.
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
arch/arm/mach-omap1/board-ams-delta.c | 59 +++++++-----
arch/arm/mach-omap1/board-h2.c | 79 ++++++++++++++
arch/arm/mach-omap1/board-h3.c | 41 ++++++++
arch/arm/mach-omap1/board-nokia770.c | 53 ++++++++--
arch/arm/mach-omap1/board-osk.c | 1 +
arch/arm/mach-omap1/board-palmte.c | 123 ----------------------
arch/arm/mach-omap1/board-palmtt.c | 4 +-
arch/arm/mach-omap1/board-palmz71.c | 14 ++--
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap2/board-h4.c | 180 +++++++++++++++++++++++++++++++--
10 files changed, 380 insertions(+), 176 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fa2da74..c73ca61 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -34,20 +34,20 @@ static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
static int ams_delta_keymap[] = {
- KEY(0, 0, KEY_F1), /* Advert */
+ KEY(0, 0, KEY_F1), /* Advert */
- KEY(3, 0, KEY_COFFEE), /* Games */
+ KEY(3, 0, KEY_COFFEE), /* Games */
KEY(2, 0, KEY_QUESTION), /* Directory */
- KEY(3, 2, KEY_CONNECT), /* Internet */
- KEY(2, 1, KEY_SHOP), /* Services */
- KEY(1, 1, KEY_PHONE), /* VoiceMail */
+ KEY(3, 2, KEY_CONNECT), /* Internet */
+ KEY(2, 1, KEY_SHOP), /* Services */
+ KEY(1, 1, KEY_PHONE), /* VoiceMail */
- KEY(1, 0, KEY_DELETE), /* Delete */
- KEY(2, 2, KEY_PLAY), /* Play */
- KEY(0, 1, KEY_PAGEUP), /* Up */
- KEY(3, 1, KEY_PAGEDOWN), /* Down */
- KEY(0, 2, KEY_EMAIL), /* ReadEmail */
- KEY(1, 2, KEY_STOP), /* Stop */
+ KEY(1, 0, KEY_DELETE), /* Delete */
+ KEY(2, 2, KEY_PLAY), /* Play */
+ KEY(0, 1, KEY_PAGEUP), /* Up */
+ KEY(3, 1, KEY_PAGEDOWN), /* Down */
+ KEY(0, 2, KEY_EMAIL), /* ReadEmail */
+ KEY(1, 2, KEY_STOP), /* Stop */
/* Numeric keypad portion */
KEY(7, 0, KEY_KP1),
@@ -61,20 +61,20 @@ static int ams_delta_keymap[] = {
KEY(5, 2, KEY_KP9),
KEY(6, 3, KEY_KP0),
KEY(7, 3, KEY_KPASTERISK),
- KEY(5, 3, KEY_KPDOT), /* # key */
- KEY(2, 7, KEY_NUMLOCK), /* Mute */
- KEY(1, 7, KEY_KPMINUS), /* Recall */
- KEY(1, 6, KEY_KPPLUS), /* Redial */
- KEY(6, 7, KEY_KPSLASH), /* Handsfree */
- KEY(0, 6, KEY_ENTER), /* Video */
+ KEY(5, 3, KEY_KPDOT), /* # key */
+ KEY(2, 7, KEY_NUMLOCK), /* Mute */
+ KEY(1, 7, KEY_KPMINUS), /* Recall */
+ KEY(1, 6, KEY_KPPLUS), /* Redial */
+ KEY(6, 7, KEY_KPSLASH), /* Handsfree */
+ KEY(0, 6, KEY_ENTER), /* Video */
- KEY(4, 7, KEY_CAMERA), /* Photo */
+ KEY(4, 7, KEY_CAMERA), /* Photo */
- KEY(4, 0, KEY_F2), /* Home */
- KEY(4, 1, KEY_F3), /* Office */
- KEY(4, 2, KEY_F4), /* Mobile */
- KEY(7, 7, KEY_F5), /* SMS */
- KEY(5, 7, KEY_F6), /* Email */
+ KEY(4, 0, KEY_F2), /* Home */
+ KEY(4, 1, KEY_F3), /* Office */
+ KEY(4, 2, KEY_F4), /* Mobile */
+ KEY(7, 7, KEY_F5), /* SMS */
+ KEY(5, 7, KEY_F6), /* Email */
/* QWERTY portion of keypad */
KEY(4, 3, KEY_Q),
@@ -107,7 +107,7 @@ static int ams_delta_keymap[] = {
KEY(3, 6, KEY_M),
KEY(2, 6, KEY_SPACE),
- KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
+ KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
KEY(3, 7, KEY_LEFTCTRL), /* Vol down */
0
@@ -158,6 +158,10 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
}
};
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
@@ -169,6 +173,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
};
static struct omap_board_config_kernel ams_delta_config[] = {
+ { OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
{ OMAP_TAG_USB, &ams_delta_usb_config },
};
@@ -199,6 +204,11 @@ static struct platform_device ams_delta_kp_device = {
.resource = ams_delta_kp_resources,
};
+static struct platform_device ams_delta_lcd_device = {
+ .name = "lcd_ams_delta",
+ .id = -1,
+};
+
static struct platform_device ams_delta_led_device = {
.name = "ams-delta-led",
.id = -1
@@ -206,6 +216,7 @@ static struct platform_device ams_delta_led_device = {
static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_kp_device,
+ &ams_delta_lcd_device,
&ams_delta_led_device,
};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index ad51939..d97ff63 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -139,6 +139,66 @@ static struct platform_device h2_nor_device = {
.resource = &h2_nor_resource,
};
+#if 0 /* REVISIT: Enable when nand_platform_data is applied */
+
+static struct mtd_partition h2_nand_partitions[] = {
+#if 0
+ /* REVISIT: enable these partitions if you make NAND BOOT
+ * work on your H2 (rev C or newer); published versions of
+ * x-load only support P2 and H3.
+ */
+ {
+ .name = "xloader",
+ .offset = 0,
+ .size = 64 * 1024,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "bootloader",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 256 * 1024,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 192 * 1024,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * SZ_1M,
+ },
+#endif
+ {
+ .name = "filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
+static struct nand_platform_data h2_nand_data = {
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .parts = h2_nand_partitions,
+ .nr_parts = ARRAY_SIZE(h2_nand_partitions),
+};
+
+static struct resource h2_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device h2_nand_device = {
+ .name = "omapnand",
+ .id = 0,
+ .dev = {
+ .platform_data = &h2_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &h2_nand_resource,
+};
+#endif
+
static struct resource h2_smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
@@ -218,11 +278,15 @@ static struct resource h2_irda_resources[] = {
.flags = IORESOURCE_IRQ,
},
};
+
+static u64 irda_dmamask = 0xffffffff;
+
static struct platform_device h2_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h2_irda_data,
+ .dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h2_irda_resources),
.resource = h2_irda_resources,
@@ -270,6 +334,7 @@ static struct platform_device h2_mcbsp1_device = {
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
+ //&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
@@ -333,6 +398,13 @@ static struct omap_board_config_kernel h2_config[] = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
+#define H2_NAND_RB_GPIO_PIN 62
+
+static int h2_nand_dev_ready(struct nand_platform_data *data)
+{
+ return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
+}
+
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
@@ -347,6 +419,13 @@ static void __init h2_init(void)
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
h2_nor_resource.end += SZ_32M - 1;
+#if 0 /* REVISIT: Enable when nand_platform_data is applied */
+ h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
+ h2_nand_resource.end += SZ_4K - 1;
+ if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
+ h2_nand_data.dev_ready = h2_nand_dev_ready;
+#endif
+
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7b260b7..1ce0ec3 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -44,6 +44,8 @@
#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
@@ -349,11 +351,14 @@ static struct resource h3_irda_resources[] = {
},
};
+static u64 irda_dmamask = 0xffffffff;
+
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
+ .dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
@@ -364,6 +369,41 @@ static struct platform_device h3_lcd_device = {
.id = -1,
};
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(15),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
+
+ .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
+ //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "H3 TSC2101",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, // tsc2101_configure,
+ .codec_set_samplerate = NULL, // tsc2101_set_samplerate,
+ .codec_clock_setup = NULL, // tsc2101_clock_setup,
+ .codec_clock_on = NULL, // tsc2101_clock_on,
+ .codec_clock_off = NULL, // tsc2101_clock_off,
+ .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h3_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -372,6 +412,7 @@ static struct platform_device *devices[] __initdata = {
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_mcbsp1_device,
};
static struct omap_usb_config h3_usb_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 70014f7..8ea0cef 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -34,6 +34,8 @@
#include <asm/arch/aic23.h>
#include <asm/arch/gpio.h>
+#include "../plat-omap/dsp/dsp_common.h"
+
static void __init omap_nokia770_init_irq(void)
{
/* On Nokia 770, the SleepX signal is masked with an
@@ -91,7 +93,7 @@ static struct platform_device nokia770_kp_device = {
};
static struct platform_device *nokia770_devices[] __initdata = {
- &nokia770_kp_device,
+ &nokia770_kp_device,
};
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
@@ -105,7 +107,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
[0] = {
- .modalias = "lcd_mipid",
+ .modalias = "lcd_mipid",
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
@@ -153,6 +155,7 @@ static struct omap_board_config_kernel nokia770_config[] = {
{ OMAP_TAG_MMC, &nokia770_mmc_config },
};
+#if defined(CONFIG_OMAP_DSP)
/*
* audio power control
*/
@@ -183,7 +186,7 @@ static void nokia770_audio_pwr_up(void)
clk_enable(dspxor_ck);
/* Turn on codec */
- tlv320aic23_power_up();
+ aic23_power_up();
if (omap_get_gpio_datain(HEADPHONE_GPIO))
/* HP not connected, turn on amplifier */
@@ -197,7 +200,7 @@ static void codec_delayed_power_down(struct work_struct *work)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
- tlv320aic23_power_down();
+ aic23_power_down();
clk_disable(dspxor_ck);
up(&audio_pwr_sem);
}
@@ -213,7 +216,8 @@ static void nokia770_audio_pwr_down(void)
schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */
}
-void nokia770_audio_pwr_up_request(int stage)
+static int
+nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
@@ -221,9 +225,11 @@ void nokia770_audio_pwr_up_request(int stage)
/* force audio_pwr_state = 0, even if it was 1. */
audio_pwr_state = 0;
up(&audio_pwr_sem);
+ return 0;
}
-void nokia770_audio_pwr_down_request(int stage)
+static int
+nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
switch (stage) {
@@ -239,7 +245,38 @@ void nokia770_audio_pwr_down_request(int stage)
break;
}
up(&audio_pwr_sem);
+ return 0;
+}
+
+static struct dsp_kfunc_device nokia770_audio_device = {
+ .name = "audio",
+ .type = DSP_KFUNC_DEV_TYPE_AUDIO,
+ .enable = nokia770_audio_pwr_up_request,
+ .disable = nokia770_audio_pwr_down_request,
+};
+
+static __init int omap_dsp_init(void)
+{
+ int ret;
+
+ dspxor_ck = clk_get(0, "dspxor_ck");
+ if (IS_ERR(dspxor_ck)) {
+ printk(KERN_ERR "couldn't acquire dspxor_ck\n");
+ return PTR_ERR(dspxor_ck);
+ }
+
+ ret = dsp_kfunc_device_register(&nokia770_audio_device);
+ if (ret) {
+ printk(KERN_ERR
+ "KFUNC device registration faild: %s\n",
+ nokia770_audio_device.name);
+ goto out;
+ }
+ return 0;
+ out:
+ return ret;
}
+#endif /* CONFIG_OMAP_DSP */
static void __init omap_nokia770_init(void)
{
@@ -251,9 +288,7 @@ static void __init omap_nokia770_init(void)
omap_board_config = nokia770_config;
omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_serial_init();
- omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request;
- omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request;
- dspxor_ck = clk_get(0, "dspxor_ck");
+ omap_dsp_init();
}
static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 7d0cf7a..253c539 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4c5b443..c23e8b6 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -321,116 +321,6 @@ static struct tsc2102_config palmte_tsc2102_config = {
.alsa_config = &palmte_alsa_config,
};
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
- .spcr2 = FRST | GRST | XRST | XINTM(3),
- .xcr2 = XDATDLY(1) | XFIG,
- .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
- .pcr0 = SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
- .name = "TSC2102 audio",
- .mcbsp_regs_alsa = &palmte_mcbsp1_regs,
- .codec_configure_dev = NULL, /* tsc2102_configure, */
- .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2102_clock_setup, */
- .codec_clock_on = NULL, /* tsc2102_clock_on, */
- .codec_clock_off = NULL, /* tsc2102_clock_off, */
- .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
-};
-
-#ifdef CONFIG_APM
-/*
- * Values measured in 10 minute intervals averaged over 10 samples.
- * May differ slightly from device to device but should be accurate
- * enough to give basic idea of battery life left and trigger
- * potential alerts.
- */
-static const int palmte_battery_sample[] = {
- 2194, 2157, 2138, 2120,
- 2104, 2089, 2075, 2061,
- 2048, 2038, 2026, 2016,
- 2008, 1998, 1989, 1980,
- 1970, 1958, 1945, 1928,
- 1910, 1888, 1860, 1827,
- 1791, 1751, 1709, 1656,
-};
-
-#define INTERVAL 10
-#define BATTERY_HIGH_TRESHOLD 66
-#define BATTERY_LOW_TRESHOLD 33
-
-static void palmte_get_power_status(struct apm_power_info *info, int *battery)
-{
- int charging, batt, hi, lo, mid;
-
- charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
- batt = battery[0];
- if (charging)
- batt -= 60;
-
- hi = ARRAY_SIZE(palmte_battery_sample);
- lo = 0;
-
- info->battery_flag = 0;
- info->units = APM_UNITS_MINS;
-
- if (batt > palmte_battery_sample[lo]) {
- info->battery_life = 100;
- info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
- } else if (batt <= palmte_battery_sample[hi - 1]) {
- info->battery_life = 0;
- info->time = 0;
- } else {
- while (hi > lo + 1) {
- mid = (hi + lo) >> 2;
- if (batt <= palmte_battery_sample[mid])
- lo = mid;
- else
- hi = mid;
- }
-
- mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
- hi = palmte_battery_sample[lo] - batt;
- info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
- ARRAY_SIZE(palmte_battery_sample);
- info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
- lo) - INTERVAL * hi / mid;
- }
-
- if (charging) {
- info->ac_line_status = APM_AC_ONLINE;
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
- } else {
- info->ac_line_status = APM_AC_OFFLINE;
- if (info->battery_life > BATTERY_HIGH_TRESHOLD)
- info->battery_status = APM_BATTERY_STATUS_HIGH;
- else if (info->battery_life > BATTERY_LOW_TRESHOLD)
- info->battery_status = APM_BATTERY_STATUS_LOW;
- else
- info->battery_status = APM_BATTERY_STATUS_CRITICAL;
- }
-
- if (info->battery_life > BATTERY_HIGH_TRESHOLD)
- info->battery_flag |= APM_BATTERY_FLAG_HIGH;
- else if (info->battery_life > BATTERY_LOW_TRESHOLD)
- info->battery_flag |= APM_BATTERY_FLAG_LOW;
- else
- info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
-}
-#else
-#define palmte_get_power_status NULL
-#endif
-
-static struct tsc2102_config palmte_tsc2102_config = {
- .use_internal = 0,
- .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
- .temp_at25c = { 2200, 2615 },
- .apm_report = palmte_get_power_status,
- .alsa_config = &palmte_alsa_config,
-};
-
static struct omap_board_config_kernel palmte_config[] = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@@ -449,17 +339,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
},
};
-static struct spi_board_info palmte_spi_info[] __initdata = {
- {
- .modalias = "tsc2102",
- .bus_num = 2, /* uWire (officially) */
- .chip_select = 0, /* As opposed to 3 */
- .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
- .platform_data = &palmte_tsc2102_config,
- .max_speed_hz = 8000000,
- },
-};
-
/* Periodically check for changes on important input pins */
struct timer_list palmte_pin_timer;
int prev_power, prev_headphones;
@@ -539,8 +418,6 @@ static void __init omap_palmte_init(void)
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
- spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-
omap_serial_init();
palmte_gpio_setup();
}
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 3c9a41a..e47010f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -314,8 +314,8 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
};
static struct omap_board_config_kernel palmtt_config[] = {
- { OMAP_TAG_USB, &palmtt_usb_config },
- { OMAP_TAG_LCD, &palmtt_lcd_config },
+ { OMAP_TAG_USB, &palmtt_usb_config },
+ { OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 54abbaa..b1ef1be 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -199,12 +199,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmZ71 AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+ .codec_configure_dev = NULL, // aic23_configure,
+ .codec_set_samplerate = NULL, // aic23_set_samplerate,
+ .codec_clock_setup = NULL, // aic23_clock_setup,
+ .codec_clock_on = NULL, // aic23_clock_on,
+ .codec_clock_off = NULL, // aic23_clock_off,
+ .get_default_samplerate = NULL, // aic23_get_default_samplerate,
};
static struct platform_device palmz71_mcbsp1_device = {
@@ -346,7 +346,7 @@ palmz71_gpio_setup(int early)
palmz71_powercable, SA_SAMPLE_RANDOM,
"palmz71-cable", 0))
printk(KERN_ERR
- "IRQ request for power cable failed!\n");
+ "IRQ request for power cable failed!\n");
palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
}
}
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 447a586..214dd19 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
/* Setup panic notifier */
- notifier_chain_register(&panic_notifier_list, &panic_block);
+ atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index b1cebdd..100aea4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,8 @@
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -36,10 +38,14 @@
#include <asm/arch/keypad.h>
#include <asm/arch/menelaus.h>
#include <asm/arch/dma.h>
+#include <asm/arch/gpmc.h>
#include "prcm-regs.h"
#include <asm/io.h>
+#define H4_FLASH_CS 0
+#define H4_SMC91X_CS 1
+
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = {
};
static struct resource h4_flash_resource = {
- .start = H4_CS0_BASE,
- .end = H4_CS0_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
@@ -133,6 +137,7 @@ static struct platform_device h4_flash_device = {
/* Select between the IrDA and aGPS module
*/
+#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
static int h4_select_irda(struct device *dev, int state)
{
unsigned char expa;
@@ -192,6 +197,10 @@ static int h4_transceiver_mode(struct device *dev, int mode)
return 0;
}
+#else
+static int h4_select_irda(struct device *dev, int state) { return 0; }
+static int h4_transceiver_mode(struct device *dev, int mode) { return 0; }
+#endif
static struct omap_irda_config h4_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
@@ -253,16 +262,80 @@ static struct platform_device *h4_devices[] __initdata = {
&h4_lcd_device,
};
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+ return (omap_readl(OMAP242X_CONTROL_STATUS) & 0xFFF);
+}
+
+/* FIXME: This function should be moved to some other file, gpmc.c? */
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ * correctly. The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+ u32 mux;
+ mux = get_sysboot_value();
+ if ((mux & 0xF) == 0xd)
+ return 1; /* NAND config (could be either) */
+ if (mux & 0x2) /* if mux'ed */
+ return 1;
+ else
+ return 0;
+}
+
static inline void __init h4_init_debug(void)
{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ unsigned int muxed, rate;
+ struct clk *l3ck;
+
+ eth_cs = H4_SMC91X_CS;
+
+ l3ck = clk_get(NULL, "core_l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (is_gpmc_muxed())
+ muxed = 0x200;
+ else
+ muxed = 0;
+
/* Make sure CS1 timings are correct */
- GPMC_CONFIG1_1 = 0x00011200;
- GPMC_CONFIG2_1 = 0x001f1f01;
- GPMC_CONFIG3_1 = 0x00080803;
- GPMC_CONFIG4_1 = 0x1c091c09;
- GPMC_CONFIG5_1 = 0x041f1f1f;
- GPMC_CONFIG6_1 = 0x000004c4;
- GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+ 0x00011000 | muxed);
+
+ if (rate >= 160000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else if (rate >= 130000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else {/* rate = 100000000 */
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+ }
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
@@ -270,11 +343,24 @@ static inline void __init h4_init_debug(void)
gpmc_cs_free(eth_cs);
}
+static void __init h4_init_flash(void)
+{
+ unsigned long base;
+
+ if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
+ printk("Can't request GPMC CS for flash\n");
+ return;
+ }
+ h4_flash_resource.start = base;
+ h4_flash_resource.end = base + SZ_64M - 1;
+}
+
static void __init omap_h4_init_irq(void)
{
omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
+ h4_init_flash();
}
static struct omap_uart_config h4_uart_config __initdata = {
@@ -336,9 +422,75 @@ static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_MMC, &h4_mmc_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
- { OMAP_TAG_USB, &h4_usb_config },
+ { OMAP_TAG_USB, &h4_usb_config },
};
+#ifdef CONFIG_MACH_OMAP_H4_TUSB
+
+#include <linux/usb/musb.h>
+
+static struct musb_hdrc_platform_data tusb_data = {
+ .mode = MUSB_OTG,
+ .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
+
+ /* 1.8V supplied by Menelaus, other voltages supplied by VBAT;
+ * so no switching.
+ */
+};
+
+static void __init tusb_evm_setup(void)
+{
+ static char announce[] __initdata =
+ KERN_INFO "TUSB 6010 EVM\n";
+ int irq;
+ unsigned dmachan = 0;
+
+ /* There are at least 32 different combinations of boards that
+ * are loosely called "H4", with a 2420 ... different OMAP chip
+ * revisions (with pin mux changes for DMAREQ, GPMC errata, etc),
+ * modifications of the CPU board, mainboard, EVM, TUSB etc.
+ * Plus omap2422, omap2423, etc.
+ *
+ * So you might need to tweak this setup to make the TUSB EVM
+ * behave on your particular setup ...
+ */
+
+ /* Already set up: GPMC AD[0..15], CLK, nOE, nWE, nADV_ALE */
+ omap_cfg_reg(E2_GPMC_NCS2);
+ omap_cfg_reg(L2_GPMC_NCS7);
+ omap_cfg_reg(M1_GPMC_WAIT2);
+
+ switch ((system_rev >> 8) & 0x0f) {
+ case 0: /* ES 1.0 */
+ case 1: /* ES 2.0 */
+ /* Assume early board revision without optional ES2.0
+ * rework to swap J15 & AA10 so DMAREQ0 works
+ */
+ omap_cfg_reg(AA10_242X_GPIO13);
+ irq = 13;
+ // omap_cfg_reg(J15_24XX_DMAREQ0);
+ break;
+ default:
+ /* Later Menelaus boards can support all 6 DMA request
+ * lines, at the price of boot flash A23-A26.
+ */
+ omap_cfg_reg(J15_24XX_GPIO99);
+ irq = 99;
+ omap_cfg_reg(AA10_242X_DMAREQ0);
+ omap_cfg_reg(AA6_242X_DMAREQ1);
+ dmachan = (1 << 1) | (1 << 0);
+ break;
+ }
+
+ if (tusb6010_setup_interface(&tusb_data,
+ TUSB6010_REFCLK_24, /* waitpin */ 2,
+ /* async cs */ 2, /* sync cs */ 7,
+ irq, dmachan) == 0)
+ printk(announce);
+}
+
+#endif
+
static void __init omap_h4_init(void)
{
/*
@@ -371,6 +523,14 @@ static void __init omap_h4_init(void)
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap_serial_init();
+
+ /* smc91x, debug leds, ps/2, extra uarts */
+ h4_init_debug();
+
+#ifdef CONFIG_MACH_OMAP_H4_TUSB
+ tusb_evm_setup();
+#endif
+
}
static void __init omap_h4_map_io(void)
--
1.4.4.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists