| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <11761525051719-git-send-email-tony@atomide.com>
Date: Mon, 9 Apr 2007 17:01:07 -0400
From: Tony Lindgren <tony@...mide.com>
To: linux-kernel@...r.kernel.org
Cc: David Brownell <dbrownell@...rs.sourceforge.net>,
Tony Lindgren <tony@...mide.com>
Subject: [PATCH 5/10] ARM: OMAP: gpio object shrinkage, cleanup
From: David Brownell <dbrownell@...rs.sourceforge.net>
More GPIO/IRQ cleanup:
- compile-time removal of much useless code
* mpuio support on non-OMAP1.
* 15xx/730/24xx gpio support on 1610
* 15xx/730/16xx gpio support on 24xx
* etc
- remove all BUG() calls, which are always bad news ... replaced some
with normal fault reports for that call, others with WARN_ON(1).
- small mpuio bugfix: add missing set_type() method
Oh, and fix a minor merge issue: inode->u.generic_ip is now gone.
Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
arch/arm/plat-omap/gpio.c | 166 +++++++++++++++++++++++++++++++++++----------
1 files changed, 130 insertions(+), 36 deletions(-)
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -267,21 +267,34 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_IO_CNTL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DIRECTION;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
+#endif
+ default:
+ WARN_ON(1);
+ return;
}
l = __raw_readl(reg);
if (is_input)
@@ -309,6 +322,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_OUTPUT;
l = __raw_readl(reg);
@@ -317,6 +331,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -325,6 +341,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_DATAOUT;
@@ -332,6 +350,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP1610_GPIO_CLEAR_DATAOUT;
l = 1 << gpio;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -340,6 +360,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -347,8 +369,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP24XX_GPIO_CLEARDATAOUT;
l = 1 << gpio;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -372,28 +395,37 @@ int omap_get_gpio_datain(int gpio)
void __iomem *reg;
if (check_gpio(gpio) < 0)
- return -1;
+ return -EINVAL;
bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_INPUT_LATCH;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DATAIN;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
+#endif
default:
- BUG();
- return -1;
+ return -EINVAL;
}
return (__raw_readl(reg)
& (1 << get_gpio_index(gpio))) != 0;
@@ -443,6 +475,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
@@ -453,6 +486,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
@@ -463,6 +498,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (gpio & 0x08)
@@ -470,9 +506,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
reg += OMAP1610_GPIO_EDGE_CTRL1;
gpio &= 0x07;
- /* We allow only edge triggering, i.e. two lowest bits */
- if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL))
- BUG();
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
if (trigger & __IRQT_RISEDGE)
@@ -504,7 +537,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
break;
#endif
default:
- BUG();
goto bad;
}
__raw_writel(l, reg);
@@ -519,7 +551,7 @@ static int gpio_irq_type(unsigned irq, unsigned type)
unsigned gpio;
int retval;
- if (irq > IH_MPUIO_BASE)
+ if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
else
gpio = irq - IH_GPIO_BASE;
@@ -527,9 +559,12 @@ static int gpio_irq_type(unsigned irq, unsigned type)
if (check_gpio(gpio) < 0)
return -EINVAL;
- if (type & IRQT_PROBE)
+ if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
- if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL)))
+
+ /* OMAP1 allows only only edge triggering */
+ if (!cpu_is_omap24xx()
+ && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
bank = get_gpio_bank(gpio);
@@ -548,24 +583,34 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
void __iomem *reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
/* MPUIO irqstatus is reset by reading the status register,
* so do nothing here */
return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQSTATUS1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(gpio_mask, reg);
@@ -588,31 +633,41 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
u32 mask;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQENABLE1;
mask = 0xffff;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
mask = 0xffffffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return 0;
}
@@ -629,6 +684,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
l = __raw_readl(reg);
@@ -637,6 +693,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -645,6 +703,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_IRQENABLE1;
@@ -652,6 +712,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
l = gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -660,6 +722,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -667,8 +731,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
l = gpio_mask;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -837,8 +902,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
desc->chip->ack(irq);
bank = get_irq_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510)
isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
@@ -984,6 +1051,22 @@ static void gpio_unmask_irq(unsigned int irq)
_set_gpio_irqenable(bank, gpio_idx, 1);
}
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .shutdown = gpio_irq_shutdown,
+ .ack = gpio_ack_irq,
+ .mask = gpio_mask_irq,
+ .unmask = gpio_unmask_irq,
+ .set_type = gpio_irq_type,
+ .set_wake = gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
static void mpuio_ack_irq(unsigned int irq)
{
/* The ISR is reset automatically, so do nothing here. */
@@ -1005,23 +1088,26 @@ static void mpuio_unmask_irq(unsigned int irq)
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .shutdown = gpio_irq_shutdown,
- .ack = gpio_ack_irq,
- .mask = gpio_mask_irq,
- .unmask = gpio_unmask_irq,
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
+ .ack = mpuio_ack_irq,
+ .mask = mpuio_mask_irq,
+ .unmask = mpuio_unmask_irq,
.set_type = gpio_irq_type,
- .set_wake = gpio_wake_enable,
};
-static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .ack = mpuio_ack_irq,
- .mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq,
- .set_type = gpio_irq_type,
-};
+
+#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank) 0
+
+#endif
+
+/*---------------------------------------------------------------------*/
static int initialized;
static struct clk * gpio_ick;
@@ -1097,9 +1183,8 @@ static int __init _omap_gpio_init(void)
bank->reserved_map = 0;
bank->base = IO_ADDRESS(bank->base);
spin_lock_init(&bank->lock);
- if (bank->method == METHOD_MPUIO) {
+ if (bank_is_mpuio(bank))
omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
- }
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
@@ -1140,7 +1225,7 @@ static int __init _omap_gpio_init(void)
#endif
for (j = bank->virtual_irq_start;
j < bank->virtual_irq_start + gpio_count; j++) {
- if (bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
set_irq_chip(j, &mpuio_irq_chip);
else
set_irq_chip(j, &gpio_irq_chip);
@@ -1180,16 +1265,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1217,14 +1306,18 @@ static int omap_gpio_resume(struct sys_device *dev)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1404,7 +1497,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
unsigned bankwidth = 16;
u32 mask = 1;
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
gpio = OMAP_MPUIO(0);
else if (cpu_is_omap24xx() || cpu_is_omap730())
bankwidth = 32;
@@ -1419,7 +1512,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
value = omap_get_gpio_datain(gpio);
is_in = gpio_is_input(bank, mask);
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
seq_printf(s, "MPUIO %2d: ", j);
else
seq_printf(s, "GPIO %3d: ", gpio);
@@ -1460,7 +1553,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
seq_printf(s, "\n");
}
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO) {
+ if (bank_is_mpuio(bank)) {
seq_printf(s, "\n");
gpio = 0;
}
@@ -1470,7 +1563,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
static int dbg_gpio_open(struct inode *inode, struct file *file)
{
- return single_open(file, dbg_gpio_show, inode->u.generic_ip/*i_private*/);
+ return single_open(file, dbg_gpio_show, &inode->i_private);
}
static const struct file_operations debug_fops = {
@@ -1482,7 +1575,8 @@ static const struct file_operations debug_fops = {
static int __init omap_gpio_debuginit(void)
{
- (void) debugfs_create_file("omap_gpio", S_IRUGO, NULL, NULL, &debug_fops);
+ (void) debugfs_create_file("omap_gpio", S_IRUGO,
+ NULL, NULL, &debug_fops);
return 0;
}
late_initcall(omap_gpio_debuginit);
--
1.4.4.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists