| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1176154294883-git-send-email-tony@atomide.com>
Date: Mon, 9 Apr 2007 17:30:52 -0400
From: Tony Lindgren <tony@...mide.com>
To: linux-kernel@...r.kernel.org
Cc: David Brownell <dbrownell@...rs.sourceforge.net>,
Tony Lindgren <tony@...mide.com>
Subject: [PATCH 9/18] ARM: OMAP: abstract debug card setup (smc, leds)
From: David Brownell <dbrownell@...rs.sourceforge.net>
Additional cleanup for debug boards on H2/P2/H3/H4: move the init
code that's not board-specific into a new file where it can be easily
shared between all the different boards (avoiding code duplication,
and making it easier to support more devices). Make H4 use that.
This should be easy to drop in to the OMAP1 boards using these debug
cards; the only difference seems to be that the p2 does an extra reset
of the smc using the fpga (probably all boards could do that, if it's
necessary) and doesn't use the gpio mux or request APIs.
Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
arch/arm/mach-omap2/Kconfig | 2 +-
arch/arm/mach-omap2/board-h4.c | 46 +------------------
arch/arm/plat-omap/Kconfig | 9 +++-
arch/arm/plat-omap/Makefile | 1 +
arch/arm/plat-omap/debug-devices.c | 86 ++++++++++++++++++++++++++++++++++++
include/asm-arm/arch-omap/board.h | 4 ++
6 files changed, 102 insertions(+), 46 deletions(-)
Index: linux-2.6/arch/arm/mach-omap2/Kconfig
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/Kconfig 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/Kconfig 2007-04-09 15:25:03.000000000 -0400
@@ -21,7 +21,7 @@ config MACH_OMAP_GENERIC
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
- select OMAP_DEBUG_LEDS if LEDS || LEDS_OMAP_DEBUG
+ select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
Index: linux-2.6/arch/arm/mach-omap2/board-h4.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/board-h4.c 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/board-h4.c 2007-04-09 15:25:03.000000000 -0400
@@ -131,26 +131,6 @@ static struct platform_device h4_flash_d
.resource = &h4_flash_resource,
};
-static struct resource h4_smc91x_resources[] = {
- [0] = {
- .start = OMAP24XX_ETHR_START, /* Physical */
- .end = OMAP24XX_ETHR_START + 0xf,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(h4_smc91x_resources),
- .resource = h4_smc91x_resources,
-};
-
/* Select between the IrDA and aGPS module
*/
static int h4_select_irda(struct device *dev, int state)
@@ -266,29 +246,14 @@ static struct platform_device h4_lcd_dev
.id = -1,
};
-static struct resource h4_led_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device h4_led_device = {
- .name = "omap_dbg_led",
- .id = -1,
- .num_resources = ARRAY_SIZE(h4_led_resources),
- .resource = h4_led_resources,
-};
-
static struct platform_device *h4_devices[] __initdata = {
- &h4_smc91x_device,
&h4_flash_device,
&h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
- &h4_led_device,
};
-static inline void __init h4_init_smc91x(void)
+static inline void __init h4_init_debug(void)
{
/* Make sure CS1 timings are correct */
GPMC_CONFIG1_1 = 0x00011200;
@@ -301,12 +266,8 @@ static inline void __init h4_init_smc91x
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
- if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- OMAP24XX_ETHR_GPIO_IRQ);
- return;
- }
- omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+ if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+ gpmc_cs_free(eth_cs);
}
static void __init omap_h4_init_irq(void)
@@ -314,7 +275,6 @@ static void __init omap_h4_init_irq(void
omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
- h4_init_smc91x();
}
static struct omap_uart_config h4_uart_config __initdata = {
Index: linux-2.6/arch/arm/plat-omap/Kconfig
===================================================================
--- linux-2.6.orig/arch/arm/plat-omap/Kconfig 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/arch/arm/plat-omap/Kconfig 2007-04-09 15:25:03.000000000 -0400
@@ -19,10 +19,15 @@ endchoice
comment "OMAP Feature Selections"
-config OMAP_DEBUG_LEDS
+config OMAP_DEBUG_DEVICES
bool
help
- For debug card leds on TI reference boards.
+ For debug cards on TI reference boards.
+
+config OMAP_DEBUG_LEDS
+ bool
+ depends on OMAP_DEBUG_DEVICES
+ default y if LEDS || LEDS_OMAP_DEBUG
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
Index: linux-2.6/arch/arm/plat-omap/Makefile
===================================================================
--- linux-2.6.orig/arch/arm/plat-omap/Makefile 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/arch/arm/plat-omap/Makefile 2007-04-09 15:25:03.000000000 -0400
@@ -17,4 +17,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
Index: linux-2.6/arch/arm/plat-omap/debug-devices.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/arch/arm/plat-omap/debug-devices.c 2007-04-09 15:25:03.000000000 -0400
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/plat-omap/debug-devices.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Modified from mach-omap2/board-h4.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+
+/* Many OMAP development platforms reuse the same "debug board"; these
+ * platforms include H2, H3, H4, and Perseus2.
+ */
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct resource led_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device led_device = {
+ .name = "omap_dbg_led",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(led_resources),
+ .resource = led_resources,
+};
+
+static struct platform_device *debug_devices[] __initdata = {
+ &smc91x_device,
+ &led_device,
+ /* ps2 kbd + mouse ports */
+ /* 4 extra uarts */
+ /* 6 input dip switches */
+ /* 8 output pins */
+};
+
+int __init debug_card_init(u32 addr, unsigned gpio)
+{
+ int status;
+
+ smc91x_resources[0].start = addr + 0x300;
+ smc91x_resources[0].end = addr + 0x30f;
+
+ smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio);
+ smc91x_resources[1].end = OMAP_GPIO_IRQ(gpio);
+
+ status = omap_request_gpio(gpio);
+ if (status < 0) {
+ printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
+ return status;
+ }
+ omap_set_gpio_direction(gpio, 1);
+
+ led_resources[0].start = addr;
+ led_resources[0].end = addr + SZ_4K - 1;
+
+ return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
+}
Index: linux-2.6/include/asm-arm/arch-omap/board.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/board.h 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/board.h 2007-04-09 15:25:03.000000000 -0400
@@ -179,4 +179,8 @@ extern const void *omap_get_var_config(u
extern struct omap_board_config_kernel *omap_board_config;
extern int omap_board_config_size;
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists