| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <11761543144181-git-send-email-tony@atomide.com>
Date: Mon, 9 Apr 2007 17:30:58 -0400
From: Tony Lindgren <tony@...mide.com>
To: linux-kernel@...r.kernel.org
Cc: Kai Svahn <kai.svahn@...ia.com>, Tony Lindgren <tony@...mide.com>
Subject: [PATCH 15/18] ARM: OMAP: Merge PM code from N800 tree
From: Kai Svahn <kai.svahn@...ia.com>
This patch merges omap2 PM code from N800 tree.
Patch adds support for sleep while idle for omap2
and handy serial console debbugging code. It also
moves code from pm-domain.c to pm.c.
This code can be used as a base for developing
power management for all omap24xx boards.
Signed-off-by: Kai Svahn <kai.svahn@...ia.com>
Signed-off-by: Tony Lindgren <tony@...mide.com>
Index: linux-2.6/arch/arm/mach-omap2/Makefile
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/Makefile 2007-04-09 14:52:28.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/Makefile 2007-04-09 15:17:39.000000000 -0400
@@ -9,7 +9,7 @@ obj-y := irq.o id.o io.o sram-fn.o memor
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Power Management
-obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
Index: linux-2.6/arch/arm/mach-omap2/pm-domain.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/pm-domain.c 2007-04-05 15:33:53.000000000 -0400
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,299 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm-domain.c
- *
- * Power domain functions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@...mide.com>
- *
- * Some code based on earlier OMAP2 sample PM code
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@...com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-
-#include "prcm-regs.h"
-
-/* Power domain offsets */
-#define PM_MPU_OFFSET 0x100
-#define PM_CORE_OFFSET 0x200
-#define PM_GFX_OFFSET 0x300
-#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
-#define PM_PLL_OFFSET 0x500 /* Autoidle only */
-#define PM_DSP_OFFSET 0x800
-#define PM_MDM_OFFSET 0xc00
-
-/* Power domain wake-up dependency control register */
-#define PM_WKDEP_OFFSET 0xc8
-#define EN_MDM (1 << 5)
-#define EN_WKUP (1 << 4)
-#define EN_GFX (1 << 3)
-#define EN_DSP (1 << 2)
-#define EN_MPU (1 << 1)
-#define EN_CORE (1 << 0)
-
-/* Core power domain state transition control register */
-#define PM_PWSTCTRL_OFFSET 0xe0
-#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
-#define MEM4RETSTATE (1 << 6)
-#define MEM3RETSTATE (1 << 5)
-#define MEM2RETSTATE (1 << 4)
-#define MEM1RETSTATE (1 << 3)
-#define LOGICRETSTATE (1 << 2) /* Logic is retained */
-#define POWERSTATE_OFF 0x3
-#define POWERSTATE_RETENTION 0x1
-#define POWERSTATE_ON 0x0
-
-/* Power domain state register */
-#define PM_PWSTST_OFFSET 0xe4
-
-/* Hardware supervised state transition control register */
-#define CM_CLKSTCTRL_OFFSET 0x48
-#define AUTOSTAT_MPU (1 << 0) /* MPU */
-#define AUTOSTAT_DSS (1 << 2) /* Core */
-#define AUTOSTAT_L4 (1 << 1) /* Core */
-#define AUTOSTAT_L3 (1 << 0) /* Core */
-#define AUTOSTAT_GFX (1 << 0) /* GFX */
-#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
-#define AUTOSTAT_DSP (1 << 0) /* DSP */
-#define AUTOSTAT_MDM (1 << 0) /* MDM */
-
-/* Automatic control of interface clock idling */
-#define CM_AUTOIDLE1_OFFSET 0x30
-#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
-#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
-#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
-#define AUTO_54M(x) (((x) & 0x3) << 6)
-#define AUTO_96M(x) (((x) & 0x3) << 2)
-#define AUTO_DPLL(x) (((x) & 0x3) << 0)
-#define AUTO_STOPPED 0x3
-#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
-#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
-#define AUTO_DISABLED 0x0
-
-/* Voltage control PRCM_VOLTCTRL bits */
-#define AUTO_EXTVOLT (1 << 15)
-#define FORCE_EXTVOLT (1 << 14)
-#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
-#define MEMRETCTRL (1 << 8)
-#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
-#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
-
-#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
-#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
-#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
-
-static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
-{
- return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
-}
-
-static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
-{
- prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
-}
-
-static u32 pmdomain_get_powerstate(int domain_offset)
-{
- return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_powerstate(u32 state, int domain_offset)
-{
- prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autocontrol(int domain_offset)
-{
- return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
-{
- prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autoidle1(int domain_offset)
-{
- return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle2(int domain_offset)
-{
- return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle3(int domain_offset)
-{
- return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle4(int domain_offset)
-{
- return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
-}
-
-static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
-{
- prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
-{
- prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
-{
- prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
-{
- prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
-}
-
-/*
- * Configures power management domains to idle clocks automatically.
- */
-void pmdomain_set_autoidle(void)
-{
- u32 val;
-
- /* Set PLL auto stop for 54M, 96M & DPLL */
- pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
- AUTO_96M(AUTO_STOPPED) |
- AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
-
- /* External clock input control
- * REVISIT: Should this be in clock framework?
- */
- PRCM_CLKSRC_CTRL |= (0x3 << 3);
-
- /* Configure number of 32KHz clock cycles for sys_clk */
- PRCM_CLKSSETUP = 0x00ff;
-
- /* Configure automatic voltage transition */
- PRCM_VOLTSETUP = 0;
- val = PRCM_VOLTCTRL;
- val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
- val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
- PRCM_VOLTCTRL = val;
-
- /* Disable emulation tools functional clock */
- PRCM_CLKEMUL_CTRL = 0x0;
-
- /* Set core memory retention state */
- val = pmdomain_get_powerstate(PM_CORE_OFFSET);
- if (cpu_is_omap2420()) {
- val &= ~(0x7 << 3);
- val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
- } else {
- val &= ~(0xf << 3);
- val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
- MEM1RETSTATE);
- }
- pmdomain_set_powerstate(val, PM_CORE_OFFSET);
-
- /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
- val = SMS_SYSCONFIG;
- val &= ~(0x3 << 3);
- val |= (0x2 << 3) | (1 << 0);
- SMS_SYSCONFIG |= val;
-
- val = SDRC_SYSCONFIG;
- val &= ~(0x3 << 3);
- val |= (0x2 << 3);
- SDRC_SYSCONFIG = val;
-
- /* Configure L3 interface for smart idle.
- * REVISIT: Enable autoidle bit0 ?
- */
- val = GPMC_SYSCONFIG;
- val &= ~(0x3 << 3);
- val |= (0x2 << 3) | (1 << 0);
- GPMC_SYSCONFIG = val;
-
- pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
- PM_MPU_OFFSET);
- pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
- if (!cpu_is_omap2420())
- pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
-
- /* Assume suspend function has saved the state for DSP and GFX */
- pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
- pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
-
-#if 0
- /* REVISIT: Internal USB needs special handling */
- force_standby_usb();
- if (cpu_is_omap2430())
- force_hsmmc();
- sdram_self_refresh_on_idle_req(1);
-#endif
-
- /* Enable clock auto control for all domains.
- * Note that CORE domain includes also DSS, L4 & L3.
- */
- pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
- pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
- pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
- PM_CORE_OFFSET);
- if (cpu_is_omap2420())
- pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
- PM_DSP_OFFSET);
- else {
- pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
- pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
- }
-
- /* Enable clock autoidle for all domains */
- pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
- if (cpu_is_omap2420()) {
- pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
- pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
- pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
- } else {
- pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
- pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
- pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
- pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
- }
- pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
- pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
-}
-
-/*
- * Initializes power domains by removing wake-up dependencies and powering
- * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
- * must re-enable DSP and GFX when used.
- */
-void __init pmdomain_init(void)
-{
- /* Remove all domain wakeup dependencies */
- pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
- pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
- pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
- pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
- if (cpu_is_omap2430())
- pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
-
- /* Power down DSP and GFX */
- pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
- pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
-}
Index: linux-2.6/arch/arm/mach-omap2/pm.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/pm.c 2007-04-05 15:33:53.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/pm.c 2007-04-09 15:18:58.000000000 -0400
@@ -3,11 +3,15 @@
*
* OMAP2 Power Management Routines
*
+ * Copyright (C) 2005 Texas Instruments, Inc.
* Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@...mide.com>
*
- * Copyright (C) 2005 Texas Instruments, Inc.
+ * Written by:
* Richard Woodruff <r-woodruff2@...com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@...ia.com>
+ * Igor Stoppa <igor.stoppa@...ia.com>
*
* Based on pm.c for omap1
*
@@ -24,6 +28,7 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,27 +41,610 @@
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/board.h>
+
+#define PRCM_BASE 0x48008000
+#define PRCM_REVISION 0x000
+#define PRCM_SYSCONFIG 0x010
+#define PRCM_IRQSTATUS_MPU 0x018
+#define PRCM_IRQENABLE_MPU 0x01c
+#define PRCM_VOLTCTRL 0x050
+#define AUTO_EXTVOLT (1 << 15)
+#define FORCE_EXTVOLT (1 << 14)
+#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
+#define MEMRETCTRL (1 << 8)
+#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
+#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
+#define PRCM_CLKSRC_CTRL 0x060
+#define PRCM_CLKOUT_CTRL 0x070
+#define PRCM_CLKEMUL_CTRL 0x078
+#define PRCM_CLKCFG_CTRL 0x080
+#define PRCM_VOLTSETUP 0x090
+#define PRCM_CLKSSETUP 0x094
+
+
+#define CM_CLKSEL_MPU 0x140
+#define CM_CLKSTCTRL_MPU 0x148
+#define AUTOSTAT_MPU (1 << 0)
+#define PM_WKDEP_MPU 0x1c8
+#define EN_WKUP (1 << 4)
+#define EN_GFX (1 << 3)
+#define EN_DSP (1 << 2)
+#define EN_MPU (1 << 1)
+#define EN_CORE (1 << 0)
+#define PM_PWSTCTRL_MPU 0x1e0
+#define PM_PWSTST_MPU 0x1e4
+
+
+#define CM_FCLKEN1_CORE 0x200
+#define CM_FCLKEN2_CORE 0x204
+#define CM_ICLKEN1_CORE 0x210
+#define CM_ICLKEN2_CORE 0x214
+#define CM_ICLKEN4_CORE 0x21c
+#define CM_IDLEST1_CORE 0x220
+#define CM_IDLEST2_CORE 0x224
+#define CM_AUTOIDLE1_CORE 0x230
+#define CM_AUTOIDLE2_CORE 0x234
+#define CM_AUTOIDLE3_CORE 0x238
+#define CM_AUTOIDLE4_CORE 0x23c
+#define CM_CLKSEL1_CORE 0x240
+#define CM_CLKSEL2_CORE 0x244
+#define CM_CLKSTCTRL_CORE 0x248
+#define AUTOSTAT_DSS (1 << 2)
+#define AUTOSTAT_L4 (1 << 1)
+#define AUTOSTAT_L3 (1 << 0)
+#define PM_WKEN1_CORE 0x2a0
+#define PM_WKEN2_CORE 0x2a4
+#define PM_WKST1_CORE 0x2b0
+#define PM_WKST2_CORE 0x2b4
+#define PM_WKDEP_CORE 0x2c8
+#define PM_PWSTCTRL_CORE 0x2e0
+#define PM_PWSTST_CORE 0x2e4
+
+
+#define CM_CLKSTCTRL_GFX 0x348
+#define AUTOSTAT_GFX (1 << 0)
+#define PM_WKDEP_GFX 0x3c8
+#define PM_PWSTCTRL_GFX 0x3e0
+
+
+#define CM_FCLKEN_WKUP 0x400
+#define CM_ICLKEN_WKUP 0x410
+#define CM_AUTOIDLE_WKUP 0x430
+#define PM_WKEN_WKUP 0x4a0
+#define EN_GPIOS (1 << 2)
+#define EN_GPT1 (1 << 0)
+#define PM_WKST_WKUP 0x4b0
+
+
+#define CM_CLKEN_PLL 0x500
+#define CM_IDLEST_CKGEN 0x520
+#define CM_AUTOIDLE_PLL 0x530
+#define CM_CLKSEL1_PLL 0x540
+#define CM_CLKSEL2_PLL 0x544
+
+
+#define CM_FCLKEN_DSP 0x800
+#define CM_ICLKEN_DSP 0x810
+#define CM_IDLEST_DSP 0x820
+#define CM_AUTOIDLE_DSP 0x830
+#define CM_CLKSEL_DSP 0x840
+#define CM_CLKSTCTRL_DSP 0x848
+#define AUTOSTAT_IVA (1 << 8)
+#define AUTOSTAT_DSP (1 << 0)
+#define RM_RSTCTRL_DSP 0x850
+#define RM_RSTST_DSP 0x858
+#define PM_WKDEP_DSP 0x8c8
+#define PM_PWSTCTRL_DSP 0x8e0
+#define PM_PWSTST_DSP 0x8e4
-#include "prcm-regs.h"
-
-static struct clk *vclk;
static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
+static void (*omap2_sram_suspend)(int dllctrl);
static void (*saved_idle)(void);
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
+static u32 prcm_base = IO_ADDRESS(PRCM_BASE);
+
+static inline void prcm_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, prcm_base + idx);
+}
+
+static inline u32 prcm_read_reg(int idx)
+{
+ return __raw_readl(prcm_base + idx);
+}
+
+static u32 omap2_read_32k_sync_counter(void)
+{
+ return omap_readl(0x48004010);
+}
+
+#ifdef CONFIG_PM_DEBUG
+int omap2_pm_debug = 0;
+
+static int serial_console_clock_disabled;
+static int serial_console_uart;
+static unsigned int serial_console_next_disable;
+
+static struct clk *console_iclk, *console_fclk;
+
+static void serial_console_kick(void)
+{
+ serial_console_next_disable = omap2_read_32k_sync_counter();
+ /* Keep the clocks on for 4 secs */
+ serial_console_next_disable += 4 * 32768;
+}
+
+static void serial_wait_tx(void)
+{
+ static const unsigned long uart_bases[3] = {
+ 0x4806a000, 0x4806c000, 0x4806e000
+ };
+ unsigned long lsr_reg;
+ int looped = 0;
+
+ /* Wait for TX FIFO and THR to get empty */
+ lsr_reg = IO_ADDRESS(uart_bases[serial_console_uart - 1] + (5 << 2));
+ while ((__raw_readb(lsr_reg) & 0x60) != 0x60)
+ looped = 1;
+ if (looped)
+ serial_console_kick();
+}
+
+static void serial_console_fclk_mask(u32 *f1, u32 *f2)
+{
+ switch (serial_console_uart) {
+ case 1:
+ *f1 &= ~(1 << 21);
+ break;
+ case 2:
+ *f1 &= ~(1 << 22);
+ break;
+ case 3:
+ *f2 &= ~(1 << 2);
+ break;
+ }
+}
+
+static void serial_console_sleep(int enable)
+{
+ if (console_iclk == NULL || console_fclk == NULL)
+ return;
+
+ if (enable) {
+ BUG_ON(serial_console_clock_disabled);
+ if (clk_get_usecount(console_fclk) == 0)
+ return;
+ if ((int) serial_console_next_disable - (int) omap2_read_32k_sync_counter() >= 0)
+ return;
+ serial_wait_tx();
+ clk_disable(console_iclk);
+ clk_disable(console_fclk);
+ serial_console_clock_disabled = 1;
+ } else {
+ int serial_wakeup = 0;
+ u32 l;
+
+ switch (serial_console_uart) {
+ case 1:
+ l = prcm_read_reg(PM_WKST1_CORE);
+ if (l & (1 << 21))
+ serial_wakeup = 1;
+ break;
+ case 2:
+ l = prcm_read_reg(PM_WKST1_CORE);
+ if (l & (1 << 22))
+ serial_wakeup = 1;
+ break;
+ case 3:
+ l = prcm_read_reg(PM_WKST2_CORE);
+ if (l & (1 << 2))
+ serial_wakeup = 1;
+ break;
+ }
+ if (serial_wakeup)
+ serial_console_kick();
+ if (!serial_console_clock_disabled)
+ return;
+ clk_enable(console_iclk);
+ clk_enable(console_fclk);
+ serial_console_clock_disabled = 0;
+ }
+}
+
+static void pm_init_serial_console(void)
+{
+ const struct omap_serial_console_config *conf;
+ char name[16];
+ u32 l;
+
+ conf = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
+ struct omap_serial_console_config);
+ if (conf == NULL)
+ return;
+ if (conf->console_uart > 3 || conf->console_uart < 1)
+ return;
+ serial_console_uart = conf->console_uart;
+ sprintf(name, "uart%d_fck", conf->console_uart);
+ console_fclk = clk_get(NULL, name);
+ if (IS_ERR(console_fclk))
+ console_fclk = NULL;
+ name[6] = 'i';
+ console_iclk = clk_get(NULL, name);
+ if (IS_ERR(console_fclk))
+ console_iclk = NULL;
+ if (console_fclk == NULL || console_iclk == NULL) {
+ serial_console_uart = 0;
+ return;
+ }
+ switch (serial_console_uart) {
+ case 1:
+ l = prcm_read_reg(PM_WKEN1_CORE);
+ l |= 1 << 21;
+ prcm_write_reg(PM_WKEN1_CORE, l);
+ break;
+ case 2:
+ l = prcm_read_reg(PM_WKEN1_CORE);
+ l |= 1 << 22;
+ prcm_write_reg(PM_WKEN1_CORE, l);
+ break;
+ case 3:
+ l = prcm_read_reg(PM_WKEN2_CORE);
+ l |= 1 << 2;
+ prcm_write_reg(PM_WKEN2_CORE, l);
+ break;
+ }
+}
+
+#define DUMP_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = prcm_read_reg(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+static void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_REG(PRCM_IRQENABLE_MPU);
+ DUMP_REG(CM_CLKSTCTRL_MPU);
+ DUMP_REG(PM_PWSTCTRL_MPU);
+ DUMP_REG(PM_PWSTST_MPU);
+ DUMP_REG(PM_WKDEP_MPU);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_REG(CM_FCLKEN1_CORE);
+ DUMP_REG(CM_FCLKEN2_CORE);
+ DUMP_REG(CM_FCLKEN_WKUP);
+ DUMP_REG(CM_ICLKEN1_CORE);
+ DUMP_REG(CM_ICLKEN2_CORE);
+ DUMP_REG(CM_ICLKEN_WKUP);
+ DUMP_REG(CM_CLKEN_PLL);
+ DUMP_REG(PRCM_CLKEMUL_CTRL);
+ DUMP_REG(CM_AUTOIDLE_PLL);
+ DUMP_REG(PM_PWSTST_CORE);
+ DUMP_REG(PRCM_CLKSRC_CTRL);
+#endif
+#if 0
+ /* DSP */
+ DUMP_REG(CM_FCLKEN_DSP);
+ DUMP_REG(CM_ICLKEN_DSP);
+ DUMP_REG(CM_IDLEST_DSP);
+ DUMP_REG(CM_AUTOIDLE_DSP);
+ DUMP_REG(CM_CLKSEL_DSP);
+ DUMP_REG(CM_CLKSTCTRL_DSP);
+ DUMP_REG(RM_RSTCTRL_DSP);
+ DUMP_REG(RM_RSTST_DSP);
+ DUMP_REG(PM_PWSTCTRL_DSP);
+ DUMP_REG(PM_PWSTST_DSP);
+#endif
+ } else {
+ DUMP_REG(PM_WKST1_CORE);
+ DUMP_REG(PM_WKST2_CORE);
+ DUMP_REG(PM_WKST_WKUP);
+ DUMP_REG(PRCM_IRQSTATUS_MPU);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ)
+ printk("--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(next_timer_interrupt() - jiffies));
+#else
+ printk("--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk("--- Woke up (slept for %u.%03u ms)\n", us / 1000, us % 1000);
+ for (i = 0; i < reg_count; i++)
+ printk("%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
+
+#else
+static inline void serial_console_sleep(int enable) {}
+static inline void pm_init_serial_console(void) {}
+static inline void omap2_pm_dump(int mode, int resume, unsigned int us) {}
+static inline void serial_console_fclk_mask(u32 *f1, u32 *f2) {}
+
+#define omap2_pm_debug 0
+
+#endif
+
+static unsigned short enable_dyn_sleep = 0; /* disabled till drivers are fixed */
+
+static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf)
+{
+ return sprintf(buf, "%hu\n", enable_dyn_sleep);
+}
+
+static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys,
+ const char * buf,
+ size_t n)
+{
+ unsigned short value;
+ if (sscanf(buf, "%hu", &value) != 1 ||
+ (value != 0 && value != 1)) {
+ printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+ return -EINVAL;
+ }
+ enable_dyn_sleep = value;
+ return n;
+}
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+static struct subsys_attribute sleep_while_idle_attr = {
+ .attr = {
+ .name = __stringify(sleep_while_idle),
+ .mode = 0644,
+ },
+ .show = omap_pm_sleep_while_idle_show,
+ .store = omap_pm_sleep_while_idle_store,
+};
+
+static struct clk *osc_ck, *emul_ck;
+
+#define CONTROL_DEVCONF __REG32(0x48000274)
+#define SDRC_DLLA_CTRL __REG32(0x68009060)
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = prcm_read_reg(CM_FCLKEN1_CORE);
+ f2 = prcm_read_reg(CM_FCLKEN2_CORE);
+ serial_console_fclk_mask(&f1, &f2);
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static int omap2_irq_pending(void)
+{
+ u32 pending_reg = IO_ADDRESS(0x480fe098);
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ if (__raw_readl(pending_reg))
+ return 1;
+ pending_reg += 0x20;
+ }
+ return 0;
+}
+
+static atomic_t sleep_block = ATOMIC_INIT(0);
+
+void omap2_block_sleep(void)
+{
+ atomic_inc(&sleep_block);
+}
+
+void omap2_allow_sleep(void)
+{
+ int i;
+
+ i = atomic_dec_return(&sleep_block);
+ BUG_ON(i < 0);
+}
-void omap2_pm_idle(void)
+static void omap2_enter_full_retention(void)
+{
+ u32 sleep_time = 0;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ prcm_write_reg(PM_WKST1_CORE, 0xffffffff);
+ prcm_write_reg(PM_WKST2_CORE, 0xffffffff);
+ prcm_write_reg(PM_WKST_WKUP, 0xffffffff);
+
+ /* Try to enter retention */
+ prcm_write_reg(PM_PWSTCTRL_MPU, (0x01 << 0) | (1 << 2));
+
+ /* Workaround to kill USB */
+ CONTROL_DEVCONF |= 0x00008000;
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ sleep_time = omap2_read_32k_sync_counter();
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap2_irq_pending())
+ goto no_sleep;
+
+ serial_console_sleep(1);
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(SDRC_DLLA_CTRL);
+no_sleep:
+ serial_console_sleep(0);
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+ u32 resume_time;
+
+ resume_time = omap2_read_32k_sync_counter();
+ tmp = resume_time - sleep_time;
+ tmp *= 1000000;
+ omap2_pm_dump(0, 1, tmp / 32768);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = prcm_read_reg(CM_FCLKEN1_CORE);
+ return l & ((1 << 19) | (1 << 20));
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ if (atomic_read(&sleep_block))
+ return 0;
+
+ /* Check for UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = prcm_read_reg(CM_FCLKEN1_CORE);
+ if (l & 0x04660001)
+ return 0;
+ /* Check for UART3. */
+ l = prcm_read_reg(CM_FCLKEN2_CORE);
+ if (l & (1 << 2))
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ u32 sleep_time = 0;
+ int only_idle = 0;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ prcm_write_reg(PM_WKST1_CORE, 0xffffffff);
+ prcm_write_reg(PM_WKST2_CORE, 0xffffffff);
+ prcm_write_reg(PM_WKST_WKUP, 0xffffffff);
+
+ /* Try to enter MPU retention */
+ prcm_write_reg(PM_PWSTCTRL_MPU, (0x01 << 0) | (1 << 2));
+ } else {
+ /* Block MPU retention */
+ prcm_write_reg(PM_PWSTCTRL_MPU, 1 << 2);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ sleep_time = omap2_read_32k_sync_counter();
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+ u32 resume_time;
+
+ resume_time = omap2_read_32k_sync_counter();
+ tmp = resume_time - sleep_time;
+ tmp *= 1000000;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp / 32768);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (!enable_dyn_sleep)
+ return 0;
+ if (omap2_fclks_active())
+ return 0;
+ if (atomic_read(&sleep_block) > 0)
+ return 0;
+ if (clk_get_usecount(osc_ck) > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
+
+ if (!omap2_can_sleep()) {
+ /* timer_dyn_reprogram() takes about 100-200 us to complete.
+ * In some contexts (e.g. when waiting for a GPMC-SDRAM DMA
+ * transfer to complete), the increased latency is too much.
+ *
+ * omap2_block_sleep() and omap2_allow_sleep() can be used
+ * to indicate this.
+ */
+ if (atomic_read(&sleep_block) == 0) {
+ timer_dyn_reprogram();
+ if (omap2_irq_pending())
+ goto out;
+ }
+ omap2_enter_mpu_retention();
+ goto out;
}
/*
@@ -66,7 +654,12 @@ void omap2_pm_idle(void)
*/
timer_dyn_reprogram();
- omap2_sram_idle();
+ if (omap2_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
local_fiq_enable();
local_irq_enable();
}
@@ -79,15 +672,12 @@ static int omap2_pm_prepare(suspend_stat
saved_idle = pm_idle;
pm_idle = NULL;
- switch (state)
- {
+ switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
-
case PM_SUSPEND_DISK:
return -ENOTSUPP;
-
default:
return -EINVAL;
}
@@ -95,250 +685,21 @@ static int omap2_pm_prepare(suspend_stat
return error;
}
-#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
- OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
- OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
-
-#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
-
-#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
- OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
- OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
-
-#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, ®, reg);
-
-static void omap2_pm_debug(char * desc)
-{
- printk("%s:\n", desc);
-
- preg(CM_CLKSTCTRL_MPU);
- preg(CM_CLKSTCTRL_CORE);
- preg(CM_CLKSTCTRL_GFX);
- preg(CM_CLKSTCTRL_DSP);
- preg(CM_CLKSTCTRL_MDM);
-
- preg(PM_PWSTCTRL_MPU);
- preg(PM_PWSTCTRL_CORE);
- preg(PM_PWSTCTRL_GFX);
- preg(PM_PWSTCTRL_DSP);
- preg(PM_PWSTCTRL_MDM);
-
- preg(PM_PWSTST_MPU);
- preg(PM_PWSTST_CORE);
- preg(PM_PWSTST_GFX);
- preg(PM_PWSTST_DSP);
- preg(PM_PWSTST_MDM);
-
- preg(CM_AUTOIDLE1_CORE);
- preg(CM_AUTOIDLE2_CORE);
- preg(CM_AUTOIDLE3_CORE);
- preg(CM_AUTOIDLE4_CORE);
- preg(CM_AUTOIDLE_WKUP);
- preg(CM_AUTOIDLE_PLL);
- preg(CM_AUTOIDLE_DSP);
- preg(CM_AUTOIDLE_MDM);
-
- preg(CM_ICLKEN1_CORE);
- preg(CM_ICLKEN2_CORE);
- preg(CM_ICLKEN3_CORE);
- preg(CM_ICLKEN4_CORE);
- preg(CM_ICLKEN_GFX);
- preg(CM_ICLKEN_WKUP);
- preg(CM_ICLKEN_DSP);
- preg(CM_ICLKEN_MDM);
-
- preg(CM_IDLEST1_CORE);
- preg(CM_IDLEST2_CORE);
- preg(CM_IDLEST3_CORE);
- preg(CM_IDLEST4_CORE);
- preg(CM_IDLEST_GFX);
- preg(CM_IDLEST_WKUP);
- preg(CM_IDLEST_CKGEN);
- preg(CM_IDLEST_DSP);
- preg(CM_IDLEST_MDM);
-
- preg(RM_RSTST_MPU);
- preg(RM_RSTST_GFX);
- preg(RM_RSTST_WKUP);
- preg(RM_RSTST_DSP);
- preg(RM_RSTST_MDM);
-
- preg(PM_WKDEP_MPU);
- preg(PM_WKDEP_CORE);
- preg(PM_WKDEP_GFX);
- preg(PM_WKDEP_DSP);
- preg(PM_WKDEP_MDM);
-
- preg(CM_FCLKEN_WKUP);
- preg(CM_ICLKEN_WKUP);
- preg(CM_IDLEST_WKUP);
- preg(CM_AUTOIDLE_WKUP);
- preg(CM_CLKSEL_WKUP);
-
- preg(PM_WKEN_WKUP);
- preg(PM_WKST_WKUP);
-}
-
-static inline void omap2_pm_save_registers(void)
-{
- /* Save interrupt registers */
- OMAP24XX_SAVE(INTC_MIR0);
- OMAP24XX_SAVE(INTC_MIR1);
- OMAP24XX_SAVE(INTC_MIR2);
-
- /* Save power control registers */
- OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
- OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
- OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
- OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
- OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
-
- /* Save power state registers */
- OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
- OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
- OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
- OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
- OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
-
- /* Save autoidle registers */
- OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
- OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
- OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
- OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
- OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
- OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
- OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
- OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
-
- /* Save idle state registers */
- OMAP24XX_SAVE(CM_IDLEST1_CORE);
- OMAP24XX_SAVE(CM_IDLEST2_CORE);
- OMAP24XX_SAVE(CM_IDLEST3_CORE);
- OMAP24XX_SAVE(CM_IDLEST4_CORE);
- OMAP24XX_SAVE(CM_IDLEST_GFX);
- OMAP24XX_SAVE(CM_IDLEST_WKUP);
- OMAP24XX_SAVE(CM_IDLEST_CKGEN);
- OMAP24XX_SAVE(CM_IDLEST_DSP);
- OMAP24XX_SAVE(CM_IDLEST_MDM);
-
- /* Save clock registers */
- OMAP24XX_SAVE(CM_FCLKEN1_CORE);
- OMAP24XX_SAVE(CM_FCLKEN2_CORE);
- OMAP24XX_SAVE(CM_ICLKEN1_CORE);
- OMAP24XX_SAVE(CM_ICLKEN2_CORE);
- OMAP24XX_SAVE(CM_ICLKEN3_CORE);
- OMAP24XX_SAVE(CM_ICLKEN4_CORE);
-}
-
-static inline void omap2_pm_restore_registers(void)
-{
- /* Restore clock state registers */
- OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
- OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
- OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
- OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
- OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
-
- /* Restore power state registers */
- OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
- OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
- OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
- OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
- OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
-
- /* Restore idle state registers */
- OMAP24XX_RESTORE(CM_IDLEST1_CORE);
- OMAP24XX_RESTORE(CM_IDLEST2_CORE);
- OMAP24XX_RESTORE(CM_IDLEST3_CORE);
- OMAP24XX_RESTORE(CM_IDLEST4_CORE);
- OMAP24XX_RESTORE(CM_IDLEST_GFX);
- OMAP24XX_RESTORE(CM_IDLEST_WKUP);
- OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
- OMAP24XX_RESTORE(CM_IDLEST_DSP);
- OMAP24XX_RESTORE(CM_IDLEST_MDM);
-
- /* Restore autoidle registers */
- OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
- OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
- OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
- OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
- OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
- OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
- OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
- OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
-
- /* Restore clock registers */
- OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
- OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
- OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
- OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
- OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
- OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
-
- /* REVISIT: Clear interrupts here */
-
- /* Restore interrupt registers */
- OMAP24XX_RESTORE(INTC_MIR0);
- OMAP24XX_RESTORE(INTC_MIR1);
- OMAP24XX_RESTORE(INTC_MIR2);
-}
-
static int omap2_pm_suspend(void)
{
- int processor_type = 0;
-
- /* REVISIT: 0x21 or 0x26? */
- if (cpu_is_omap2420())
- processor_type = 0x21;
-
- if (!processor_type)
- return -ENOTSUPP;
-
- local_irq_disable();
- local_fiq_disable();
-
- omap2_pm_save_registers();
-
- /* Disable interrupts except for the wake events */
- INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
- INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
- INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
-
- pmdomain_set_autoidle();
-
- /* Clear old wake-up events */
- PM_WKST1_CORE = 0;
- PM_WKST2_CORE = 0;
- PM_WKST_WKUP = 0;
-
- /* Enable wake-up events */
- PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
- PM_WKEN2_CORE = (1 << 2); /* UART3 */
- PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
-
- /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
- * in the SRAM suspend code */
- CM_FCLKEN1_CORE = 0;
- CM_FCLKEN2_CORE = 0;
- CM_ICLKEN1_CORE = 0;
- CM_ICLKEN3_CORE = 0;
- CM_ICLKEN4_CORE = 0;
+ u32 wken_wkup, mir1;
- omap2_pm_debug("Status before suspend");
+ wken_wkup = prcm_read_reg(PM_WKEN_WKUP);
+ prcm_write_reg(PM_WKEN_WKUP, wken_wkup & ~EN_GPT1);
- /* Must wait for serial buffers to clear */
- mdelay(200);
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
- /* Jump to SRAM suspend code
- * REVISIT: When is this SDRC_DLLB_CTRL?
- */
- omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
-
- /* Back from sleep */
- omap2_pm_restore_registers();
+ omap2_enter_full_retention();
- local_fiq_enable();
- local_irq_enable();
+ omap_writel(mir1, 0x480fe0a4);
+ prcm_write_reg(PM_WKEN_WKUP, wken_wkup);
return 0;
}
@@ -347,8 +708,7 @@ static int omap2_pm_enter(suspend_state_
{
int ret = 0;
- switch (state)
- {
+ switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap2_pm_suspend();
@@ -376,16 +736,100 @@ static struct pm_ops omap_pm_ops = {
.finish = omap2_pm_finish,
};
+static void __init prcm_setup_regs(void)
+{
+ u32 l;
+
+ /* Enable autoidle */
+ prcm_write_reg(PRCM_SYSCONFIG, 1 << 0);
+
+ /* Set all domain wakeup dependencies */
+ prcm_write_reg(PM_WKDEP_MPU, EN_WKUP);
+ prcm_write_reg(PM_WKDEP_DSP, 0);
+ prcm_write_reg(PM_WKDEP_GFX, 0);
+
+ l = prcm_read_reg(PM_PWSTCTRL_CORE);
+ /* Enable retention for all memory blocks */
+ l |= (1 << 3) | (1 << 4) | (1 << 5);
+ /* Set power state to RETENTION */
+ l &= ~0x03;
+ l |= 0x01 << 0;
+ prcm_write_reg(PM_PWSTCTRL_CORE, l);
+
+ prcm_write_reg(PM_PWSTCTRL_MPU, (0x01 << 0) | (1 << 2));
+
+ /* Power down DSP and GFX */
+ prcm_write_reg(PM_PWSTCTRL_DSP, (1 << 18) | 0x03);
+ prcm_write_reg(PM_PWSTCTRL_GFX, (1 << 18) | 0x03);
+
+ /* Enable clock auto control for all domains */
+ prcm_write_reg(CM_CLKSTCTRL_MPU, AUTOSTAT_MPU);
+ prcm_write_reg(CM_CLKSTCTRL_CORE, AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3);
+ prcm_write_reg(CM_CLKSTCTRL_GFX, AUTOSTAT_GFX);
+ prcm_write_reg(CM_CLKSTCTRL_DSP, AUTOSTAT_IVA | AUTOSTAT_DSP);
+
+ /* Enable clock autoidle for all domains */
+ prcm_write_reg(CM_AUTOIDLE1_CORE, 0xfffffff9);
+ prcm_write_reg(CM_AUTOIDLE2_CORE, 0x07);
+ prcm_write_reg(CM_AUTOIDLE3_CORE, 0x07);
+ prcm_write_reg(CM_AUTOIDLE4_CORE, 0x1f);
+
+ prcm_write_reg(CM_AUTOIDLE_DSP, 0x02);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ prcm_write_reg(CM_AUTOIDLE_PLL, (0x03 << 0) | (0x03 << 2) | (0x03 << 6));
+
+ prcm_write_reg(CM_AUTOIDLE_WKUP, 0x3f);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prcm_write_reg(PRCM_CLKSSETUP, 15);
+
+ /* Configure automatic voltage transition */
+ prcm_write_reg(PRCM_VOLTSETUP, 2);
+ l = AUTO_EXTVOLT | SETOFF_LEVEL(1) | MEMRETCTRL | \
+ SETRET_LEVEL(1) | VOLT_LEVEL(0);
+ prcm_write_reg(PRCM_VOLTCTRL, l);
+
+ /* Enable wake-up events */
+ prcm_write_reg(PM_WKEN_WKUP, EN_GPIOS | EN_GPT1);
+}
+
int __init omap2_pm_init(void)
{
- printk("Power Management for TI OMAP.\n");
+ u32 l;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prcm_read_reg(PRCM_REVISION);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
- vclk = clk_get(NULL, "virt_prcm_set");
- if (IS_ERR(vclk)) {
- printk(KERN_ERR "Could not get PM vclk\n");
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
return -ENODEV;
}
+ prcm_setup_regs();
+
+ pm_init_serial_console();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
@@ -393,16 +837,17 @@ int __init omap2_pm_init(void)
*/
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
omap24xx_idle_loop_suspend_sz);
-
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
omap24xx_cpu_suspend_sz);
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
- pmdomain_init();
+ l = subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+ if (l)
+ printk(KERN_ERR "subsys_create_file failed: %d\n", l);
return 0;
}
-__initcall(omap2_pm_init);
+late_initcall(omap2_pm_init);
Index: linux-2.6/arch/arm/mach-omap2/sleep.S
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/sleep.S 2007-04-05 15:33:53.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/sleep.S 2007-04-09 15:17:39.000000000 -0400
@@ -5,6 +5,10 @@
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@...com>
*
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@...ia.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -26,14 +30,6 @@
#include <asm/arch/io.h>
#include <asm/arch/pm.h>
-#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
-#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
-#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
-#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
-#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
-#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
-#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
-
#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
@@ -53,7 +49,7 @@
*/
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
- mov r0, #0 @ clear for mcr setup
+ mov r0, #0x0 @ clear for mrc call
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
ldmfd sp!, {r0, pc} @ restore regs and return
@@ -67,9 +63,6 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
*
* Input:
* R0 : DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
*
* The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
* when we get called, but the DLL probably isn't. We will wait a bit more in
@@ -129,14 +122,8 @@ A_SDRC_POWER:
.word A_SDRC_POWER_V
A_SDRC0:
.word A_SDRC0_V
-A_CM_CLKSEL2_PLL_S:
- .word A_CM_CLKSEL2_PLL_V
-A_CM_CLKEN_PLL:
- .word A_CM_CLKEN_PLL_V
A_SDRC_DLLA_CTRL_S:
.word A_SDRC_DLLA_CTRL_V
-A_SDRC_MANUAL_S:
- .word A_SDRC_MANUAL_V
ENTRY(omap24xx_cpu_suspend_sz)
.word . - omap24xx_cpu_suspend
Index: linux-2.6/include/asm-arm/arch-omap/pm.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/pm.h 2007-04-05 15:33:53.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/pm.h 2007-04-09 15:17:39.000000000 -0400
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-omap/pm.h
+ * linux/include/asm/arch-omap/pm.h
*
* Header file for OMAP Power Management Routines
*
@@ -115,6 +115,8 @@
#include <linux/clk.h>
+extern struct subsystem power_subsys;
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
@@ -132,6 +134,8 @@ void clk_deny_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
+extern void omap2_block_sleep(void);
+extern void omap2_allow_sleep(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
@@ -181,10 +185,6 @@ extern void omap_serial_wake_trigger(int
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -294,63 +294,5 @@ enum mpui1610_save_state {
#endif
};
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
Index: linux-2.6/include/asm-arm/arch-omap/gpio.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/gpio.h 2007-04-05 15:33:53.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/gpio.h 2007-04-09 15:17:39.000000000 -0400
@@ -75,6 +75,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
/*-------------------------------------------------------------------------*/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists