| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.61.0704102342050.32056@yvahk01.tjqt.qr>
Date: Tue, 10 Apr 2007 23:42:45 +0200 (MEST)
From: Jan Engelhardt <jengelh@...ux01.gwdg.de>
To: "James E.J. Bottomley" <James.Bottomley@...elEye.com>
cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-scsi@...r.kernel.org
Subject: [PATCH 29/30] Use menuconfig objects - SCSI
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@....de>
Index: linux-2.6.21-rc5/drivers/scsi/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/Kconfig
+++ linux-2.6.21-rc5/drivers/scsi/Kconfig
@@ -279,12 +279,16 @@ source "drivers/scsi/libsas/Kconfig"
endmenu
-menu "SCSI low-level drivers"
+menuconfig SCSI_LOWLEVEL
+ bool "SCSI low-level drivers"
depends on SCSI!=n
+ default y
+
+if SCSI_LOWLEVEL
config ISCSI_TCP
tristate "iSCSI Initiator over TCP/IP"
- depends on SCSI && INET
+ depends on INET
select CRYPTO
select CRYPTO_MD5
select CRYPTO_CRC32C
@@ -308,25 +312,25 @@ config ISCSI_TCP
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
- depends on SGI_IP22 && SCSI
+ depends on SGI_IP22
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
config SCSI_DECNCR
tristate "DEC NCR53C94 Scsi Driver"
- depends on MACH_DECSTATION && SCSI && TC
+ depends on MACH_DECSTATION && TC
help
Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on MACH_DECSTATION && SCSI && 32BIT
+ depends on MACH_DECSTATION && 32BIT
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -339,7 +343,7 @@ config BLK_DEV_3W_XXXX_RAID
config SCSI_3W_9XXX
tristate "3ware 9xxx SATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports the 9000 series 3ware SATA-RAID cards.
@@ -350,7 +354,7 @@ config SCSI_3W_9XXX
config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
@@ -361,7 +365,7 @@ config SCSI_7000FASST
config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports the ACARD SCSI host adapter.
Support Chip <ATP870 ATP876 ATP880 ATP885>
@@ -370,7 +374,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
- depends on ISA && SCSI && !64BIT
+ depends on ISA && !64BIT
select SCSI_SPI_ATTRS
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
@@ -386,7 +390,7 @@ config SCSI_AHA152X
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
@@ -400,7 +404,7 @@ config SCSI_AHA1542
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
- depends on EISA && SCSI
+ depends on EISA
---help---
This is support for a SCSI host adapter. It is explained in section
3.5 of the SCSI-HOWTO, available from
@@ -413,7 +417,7 @@ config SCSI_AHA1740
config SCSI_AACRAID
tristate "Adaptec AACRAID support"
- depends on SCSI && PCI
+ depends on PCI
help
This driver supports a variety of Dell, HP, Adaptec, IBM and
ICP storage products. For a list of supported products, refer
@@ -427,7 +431,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
- depends on (ISA || EISA || PCI ) && SCSI
+ depends on ISA || EISA || PCI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
@@ -471,7 +475,7 @@ source "drivers/scsi/aic94xx/Kconfig"
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI
+ depends on !64BIT && PCI
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -482,7 +486,6 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on SCSI
depends on ISA || EISA || PCI
depends on BROKEN || X86_32
help
@@ -495,7 +498,7 @@ config SCSI_ADVANSYS
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
@@ -507,7 +510,7 @@ config SCSI_IN2000
config SCSI_ARCMSR
tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports all of ARECA's SATA RAID controller cards.
This is an ARECA-maintained driver by Erich Chen.
@@ -523,7 +526,7 @@ source "drivers/scsi/megaraid/Kconfig.me
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx Controller support"
- depends on SCSI && PCI
+ depends on PCI
help
This option enables support for HighPoint RocketRAID 3xxx
controllers.
@@ -533,7 +536,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
+ depends on (PCI || ISA || MCA) && ISA_DMA_API
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
@@ -555,7 +558,7 @@ config SCSI_OMIT_FLASHPOINT
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on PCI && SCSI
+ depends on PCI
select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -565,7 +568,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
select SCSI_SPI_ATTRS
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
@@ -578,7 +581,7 @@ config SCSI_DTC3280
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ depends on (ISA || EISA || PCI) && ISA_DMA_API
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -626,7 +629,7 @@ config SCSI_EATA_MAX_TAGS
config SCSI_EATA_PIO
tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on (ISA || EISA || PCI) && SCSI && BROKEN
+ depends on (ISA || EISA || PCI) && BROKEN
---help---
This driver supports all EATA-PIO protocol compliant SCSI Host
Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
@@ -640,7 +643,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
- depends on (ISA || PCI) && SCSI
+ depends on ISA || PCI
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -659,7 +662,7 @@ config SCSI_FUTURE_DOMAIN
config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
- depends on MCA_LEGACY && SCSI
+ depends on MCA_LEGACY
---help---
This is support for Future Domain MCS 600/700 MCA SCSI adapters.
Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
@@ -672,7 +675,7 @@ config SCSI_FD_MCS
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ depends on (ISA || EISA || PCI) && ISA_DMA_API
---help---
Formerly called GDT SCSI Disk Array Controller Support.
@@ -686,7 +689,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
- depends on ISA && SCSI
+ depends on ISA
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
@@ -706,7 +709,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
- depends on ISA && SCSI
+ depends on ISA
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
@@ -732,7 +735,7 @@ config SCSI_GENERIC_NCR53C400
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA_LEGACY && SCSI
+ depends on MCA_LEGACY
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
@@ -802,7 +805,7 @@ config IBMMCA_SCSI_DEV_RESET
config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -838,7 +841,7 @@ config SCSI_IBMVSCSIS
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on PCI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -849,7 +852,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on PCI && SCSI
+ depends on PCI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -860,7 +863,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
- depends on SCSI && PARPORT_PC
+ depends on PARPORT_PC
---help---
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -887,7 +890,7 @@ config SCSI_PPA
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
- depends on SCSI && PARPORT_PC
+ depends on PARPORT_PC
---help---
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -943,7 +946,7 @@ config SCSI_IZIP_SLOW_CTR
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for the NCR53c406a SCSI host adapter. For user
configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
@@ -955,7 +958,7 @@ config SCSI_NCR53C406A
config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA
select SCSI_SPI_ATTRS
help
This is a driver for the MicroChannel Dual 700 card produced by
@@ -967,7 +970,7 @@ config SCSI_NCR_D700
config SCSI_LASI700
tristate "HP Lasi SCSI support for 53c700/710"
- depends on GSC && SCSI
+ depends on GSC
select SCSI_SPI_ATTRS
help
This is a driver for the SCSI controller in the Lasi chip found in
@@ -976,7 +979,7 @@ config SCSI_LASI700
config SCSI_SNI_53C710
tristate "SNI RM SCSI support for 53c710"
- depends on SNI_RM && SCSI
+ depends on SNI_RM
select SCSI_SPI_ATTRS
select 53C700_LE_ON_BE
help
@@ -990,7 +993,7 @@ config 53C700_LE_ON_BE
config SCSI_STEX
tristate "Promise SuperTrak EX Series support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This driver supports Promise SuperTrak EX series storage controllers.
@@ -1002,7 +1005,7 @@ config SCSI_STEX
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
select SCSI_SPI_ATTRS
---help---
This driver supports the whole NCR53C8XX/SYM53C8XX family of
@@ -1069,7 +1072,7 @@ config SCSI_SYM53C8XX_MMIO
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
- depends on PCI && SCSI && ATA
+ depends on PCI && ATA
select FW_LOADER
---help---
This driver supports the IBM Power Linux family RAID adapters.
@@ -1096,7 +1099,7 @@ config SCSI_IPR_DUMP
config SCSI_ZALON
tristate "Zalon SCSI support"
- depends on GSC && SCSI
+ depends on GSC
select SCSI_SPI_ATTRS
help
The Zalon is a GSC/HSC bus interface chip that sits between the
@@ -1107,7 +1110,7 @@ config SCSI_ZALON
config SCSI_NCR_Q720
tristate "NCR Quad 720 MCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA
select SCSI_SPI_ATTRS
help
This is a driver for the MicroChannel Quad 720 card produced by
@@ -1217,7 +1220,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
+ depends on MCA_LEGACY && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
@@ -1228,7 +1231,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
@@ -1242,7 +1245,7 @@ config SCSI_PAS16
config SCSI_PSI240I
tristate "PSI240i support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for the PSI240i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1253,7 +1256,7 @@ config SCSI_PSI240I
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
@@ -1281,7 +1284,7 @@ config SCSI_QLOGIC_FC_FIRMWARE
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
help
Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
@@ -1290,7 +1293,7 @@ config SCSI_QLOGIC_1280
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
- depends on SBUS && SCSI
+ depends on SBUS
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
controllers are known under Solaris as qpti and in the openprom as
@@ -1305,7 +1308,7 @@ source "drivers/scsi/qla4xxx/Kconfig"
config SCSI_LPFC
tristate "Emulex LightPulse Fibre Channel Support"
- depends on PCI && SCSI
+ depends on PCI
select SCSI_FC_ATTRS
help
This lpfc driver supports the Emulex LightPulse
@@ -1313,7 +1316,7 @@ config SCSI_LPFC
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1327,7 +1330,7 @@ config SCSI_SEAGATE
# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
- depends on (EISA || MCA) && SCSI
+ depends on EISA || MCA
select SCSI_SPI_ATTRS
---help---
This driver for NCR53c710 based SCSI host adapters.
@@ -1341,7 +1344,7 @@ config 53C700_IO_MAPPED
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
adapter that comes with some HP scanners. This driver requires that
@@ -1359,7 +1362,7 @@ config SCSI_SYM53C416
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
- depends on PCI && SCSI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
---help---
This driver supports PCI SCSI host adapters based on the ASIC
TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
@@ -1374,7 +1377,7 @@ config SCSI_DC395x
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
@@ -1390,7 +1393,7 @@ config SCSI_DC390T
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
@@ -1406,7 +1409,7 @@ config SCSI_T128
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
@@ -1455,7 +1458,7 @@ config SCSI_U14_34F_MAX_TAGS
config SCSI_ULTRASTOR
tristate "UltraStor SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA
---help---
This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
adapter family. This driver is explained in section 3.12 of the
@@ -1472,7 +1475,7 @@ config SCSI_ULTRASTOR
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
- depends on PCI && SCSI && !64BIT
+ depends on PCI && !64BIT
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1483,7 +1486,6 @@ config SCSI_NSP32
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
- depends on SCSI
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
@@ -1496,7 +1498,7 @@ config SCSI_DEBUG
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
- depends on PPC32 && PPC_PMAC && SCSI
+ depends on PPC32 && PPC_PMAC
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
@@ -1527,7 +1529,7 @@ config SCSI_MESH_RESET_DELAY_MS
config SCSI_MAC53C94
tristate "53C94 (Power Mac external SCSI) support"
- depends on PPC32 && PPC_PMAC && SCSI
+ depends on PPC32 && PPC_PMAC
help
On Power Macintoshes (and clones) with two SCSI buses, the external
SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
@@ -1541,7 +1543,7 @@ source "drivers/scsi/arm/Kconfig"
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
- depends on MACH_JAZZ && SCSI
+ depends on MACH_JAZZ
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
@@ -1549,7 +1551,7 @@ config JAZZ_ESP
config A3000_SCSI
tristate "A3000 WD33C93A support"
- depends on AMIGA && SCSI
+ depends on AMIGA
help
If you have an Amiga 3000 and have SCSI devices connected to the
built-in SCSI controller, say Y. Otherwise, say N.
@@ -1559,7 +1561,7 @@ config A3000_SCSI
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
say N.
@@ -1569,7 +1571,7 @@ config A2091_SCSI
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO
---help---
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
@@ -1582,7 +1584,7 @@ config GVP11_SCSI
config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with an original (MkI) Phase5 Cyberstorm
accelerator board and the optional Cyberstorm SCSI controller,
@@ -1590,7 +1592,7 @@ config CYBERSTORM_SCSI
config CYBERSTORMII_SCSI
tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
and the optional Cyberstorm SCSI controller, say Y. Otherwise,
@@ -1598,7 +1600,7 @@ config CYBERSTORMII_SCSI
config BLZ2060_SCSI
tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
and want to use the onboard SCSI controller, say Y. Otherwise,
@@ -1606,7 +1608,7 @@ config BLZ2060_SCSI
config BLZ1230_SCSI
tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
1260 accelerator, and the optional SCSI module, say Y. Otherwise,
@@ -1614,14 +1616,14 @@ config BLZ1230_SCSI
config FASTLANE_SCSI
tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
config SCSI_AMIGA7XX
bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
- depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
+ depends on AMIGA && EXPERIMENTAL && BROKEN
help
Support for various NCR53c710-based SCSI controllers on the Amiga.
This includes:
@@ -1640,7 +1642,7 @@ config SCSI_AMIGA7XX
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && SCSI && EXPERIMENTAL
+ depends on ZORRO && EXPERIMENTAL
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one,
@@ -1649,7 +1651,7 @@ config OKTAGON_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
- depends on ATARI && SCSI && BROKEN
+ depends on ATARI && BROKEN
select SCSI_SPI_ATTRS
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
@@ -1701,7 +1703,7 @@ config MAC_SCSI
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
- depends on MAC && SCSI
+ depends on MAC
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes. If you have one of these say Y and read the
@@ -1721,7 +1723,7 @@ config MVME147_SCSI
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
- depends on MVME16x && SCSI && BROKEN
+ depends on MVME16x && BROKEN
select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
@@ -1730,7 +1732,7 @@ config MVME16x_SCSI
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
- depends on BVME6000 && SCSI && BROKEN
+ depends on BVME6000 && BROKEN
select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
@@ -1747,7 +1749,7 @@ config SCSI_NCR53C7xx_FAST
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI
+ depends on SUN3
select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
@@ -1765,7 +1767,7 @@ config SUN3X_ESP
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
- depends on SBUS && SCSI
+ depends on SBUS
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
@@ -1777,7 +1779,7 @@ config SCSI_SUNESP
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
- depends on S390 && QDIO && SCSI
+ depends on S390 && QDIO
select SCSI_FC_ATTRS
help
If you want to access SCSI devices attached to your IBM eServer
@@ -1791,7 +1793,7 @@ config ZFCP
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
- depends on SCSI && PCI
+ depends on PCI
select SCSI_TGT
help
If you wish to use SRP target drivers, say Y.
@@ -1799,7 +1801,7 @@ config SCSI_SRP
To compile this driver as a module, choose M here: the
module will be called libsrp.
-endmenu
+endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
Index: linux-2.6.21-rc5/drivers/scsi/aic7xxx/Kconfig.aic79xx
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ linux-2.6.21-rc5/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -4,7 +4,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI && SCSI
+ depends on PCI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Ultra 320 PCI-X
Index: linux-2.6.21-rc5/drivers/scsi/arm/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/arm/Kconfig
+++ linux-2.6.21-rc5/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI && BROKEN
+ depends on ARCH_ACORN && BROKEN
select SCSI_SPI_ATTRS
help
This enables support for the Acorn SCSI card (aka30). If you have an
@@ -32,7 +32,7 @@ config SCSI_ACORNSCSI_SYNC
config SCSI_ARXESCSI
tristate "ARXE SCSI support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN
help
Around 1991, Arxe Systems Limited released a high density floppy
disc interface for the Acorn Archimedes range, to allow the use of
@@ -44,21 +44,21 @@ config SCSI_ARXESCSI
config SCSI_CUMANA_2
tristate "CumanaSCSI II support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN
help
This enables support for the Cumana SCSI II card. If you have an
Acorn system with one of these, say Y. If unsure, say N.
config SCSI_EESOXSCSI
tristate "EESOX support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN
help
This enables support for the EESOX SCSI card. If you have an Acorn
system with one of these, say Y, otherwise say N.
config SCSI_POWERTECSCSI
tristate "PowerTec support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN
help
This enables support for the Powertec SCSI card on Acorn systems. If
you have one of these, say Y. If unsure, say N.
@@ -68,7 +68,7 @@ comment "The following drivers are not f
config SCSI_CUMANA_1
tristate "CumanaSCSI I support (EXPERIMENTAL)"
- depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ depends on ARCH_ACORN && EXPERIMENTAL
select SCSI_SPI_ATTRS
help
This enables support for the Cumana SCSI I card. If you have an
@@ -76,7 +76,7 @@ config SCSI_CUMANA_1
config SCSI_ECOSCSI
tristate "EcoScsi support (EXPERIMENTAL)"
- depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
+ depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K)
select SCSI_SPI_ATTRS
help
This enables support for the EcoSCSI card -- a small card that sits
@@ -85,7 +85,7 @@ config SCSI_ECOSCSI
config SCSI_OAK1
tristate "Oak SCSI support (EXPERIMENTAL)"
- depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ depends on ARCH_ACORN && EXPERIMENTAL
select SCSI_SPI_ATTRS
help
This enables support for the Oak SCSI card. If you have an Acorn
Index: linux-2.6.21-rc5/drivers/scsi/megaraid/Kconfig.megaraid
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/megaraid/Kconfig.megaraid
+++ linux-2.6.21-rc5/drivers/scsi/megaraid/Kconfig.megaraid
@@ -1,12 +1,12 @@
config MEGARAID_NEWGEN
bool "LSI Logic New Generation RAID Device Drivers"
- depends on PCI && SCSI
+ depends on PCI
help
LSI Logic RAID Device Drivers
config MEGARAID_MM
tristate "LSI Logic Management Module (New Driver)"
- depends on PCI && SCSI && MEGARAID_NEWGEN
+ depends on PCI && MEGARAID_NEWGEN
help
Management Module provides ioctl, sysfs support for LSI Logic
RAID controllers.
@@ -16,7 +16,7 @@ config MEGARAID_MM
config MEGARAID_MAILBOX
tristate "LSI Logic MegaRAID Driver (New Driver)"
- depends on PCI && SCSI && MEGARAID_MM
+ depends on PCI && MEGARAID_MM
help
List of supported controllers
@@ -66,7 +66,7 @@ config MEGARAID_MAILBOX
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters. This driver also support the all U320
@@ -77,7 +77,7 @@ config MEGARAID_LEGACY
config MEGARAID_SAS
tristate "LSI Logic MegaRAID SAS RAID Module"
- depends on PCI && SCSI
+ depends on PCI
help
Module for LSI Logic's SAS based RAID controllers.
To compile this driver as a module, choose 'm' here.
Index: linux-2.6.21-rc5/drivers/scsi/pcmcia/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/pcmcia/Kconfig
+++ linux-2.6.21-rc5/drivers/scsi/pcmcia/Kconfig
@@ -2,8 +2,12 @@
# PCMCIA SCSI adapter configuration
#
-menu "PCMCIA SCSI adapter support"
+menuconfig SCSI_PCMCIA
+ bool "PCMCIA SCSI adapter support"
depends on SCSI!=n && PCMCIA!=n && MODULES
+ default y
+
+if SCSI_PCMCIA
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
@@ -80,4 +84,4 @@ config PCMCIA_SYM53C500
To compile this driver as a module, choose M here: the
module will be called sym53c500_cs.
-endmenu
+endif # SCSI_PCMCIA
Index: linux-2.6.21-rc5/drivers/scsi/qla2xxx/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/qla2xxx/Kconfig
+++ linux-2.6.21-rc5/drivers/scsi/qla2xxx/Kconfig
@@ -1,6 +1,6 @@
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
- depends on PCI && SCSI
+ depends on PCI
select SCSI_FC_ATTRS
select FW_LOADER
---help---
Index: linux-2.6.21-rc5/drivers/scsi/qla4xxx/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/scsi/qla4xxx/Kconfig
+++ linux-2.6.21-rc5/drivers/scsi/qla4xxx/Kconfig
@@ -1,6 +1,6 @@
config SCSI_QLA_ISCSI
tristate "QLogic ISP4XXX host adapter family support"
- depends on PCI && SCSI && NET
+ depends on PCI && NET
select SCSI_ISCSI_ATTRS
---help---
This driver supports the QLogic 40xx (ISP4XXX) iSCSI host
#<EOF>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists