diff -Naur linux-2.6.20.6/Documentation/usb/bulk_tx_hacks.txt linux-2.6.20.6_jca/Documentation/usb/bulk_tx_hacks.txt
--- linux-2.6.20.6/Documentation/usb/bulk_tx_hacks.txt	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.20.6_jca/Documentation/usb/bulk_tx_hacks.txt	2007-04-13 09:59:19.000000000 -0400
@@ -0,0 +1,28 @@
+bulk_tx_hacks.txt
+Copyright (C) 2007 Jeremy C. Andrus <jeremy@jeremya.com>
+Started:   2007-April-13
+
+
+How to use a 1024-byte bulk transfer packet
+
+There are some devices/companies which have decided to use
+a bulk transfer packet size which is larger than the maximum
+specified in the USB spec. Because I was interested in using
+such a device, I found it necessary to devise a way to allow
+this functionality in the linux kernel. 
+
+It is reasonably simple to create a 1024-byte bulk transfer
+URB. Simply OR the 'URB_1024_BYTE_PKT' value into the URB's
+transfer_flags field before submitting it to the system:
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	usb_fill_bulk_urb( urb, ... );
+
+	/* this allows the URB's buffer to be 1024 bytes */
+	urb->transfer_flags |= URB_1024_BYTE_PKT;
+	
+	retval = usb_submit_urb( urb, GFP_KERNEL );
+	
+	usb_free_urb( urb );
+
diff -Naur linux-2.6.20.6/drivers/usb/host/Kconfig linux-2.6.20.6_jca/drivers/usb/host/Kconfig
--- linux-2.6.20.6/drivers/usb/host/Kconfig	2007-04-06 16:02:48.000000000 -0400
+++ linux-2.6.20.6_jca/drivers/usb/host/Kconfig	2007-04-13 10:00:36.000000000 -0400
@@ -67,6 +67,20 @@
 
 	  If unsure, say N.
 
+config USB_EHCI_1024BYTE_BULK_PKTS
+	bool "Allow 1024-byte packets in Bulk Transfer mode"
+	depends on USB_EHCI_HCD && EXPERIMENTAL
+	---help---
+	  The USB specification allows a maximum bulk transfer packet size
+	  of 512 bytes. There are a few devices which have decided to break
+	  this specification and use 1024 byte packets. This option allows
+	  the use of the larger packet size with a very specific flag set 
+	  in the URB.
+	  
+	  See the Documentation/usb/bulk_tx_hacks.txt file for details.
+	  
+	  If unsure, say N.
+
 config USB_ISP116X_HCD
 	tristate "ISP116X HCD support"
 	depends on USB
diff -Naur linux-2.6.20.6/drivers/usb/host/ehci-q.c linux-2.6.20.6_jca/drivers/usb/host/ehci-q.c
--- linux-2.6.20.6/drivers/usb/host/ehci-q.c	2007-04-06 16:02:48.000000000 -0400
+++ linux-2.6.20.6_jca/drivers/usb/host/ehci-q.c	2007-04-13 09:47:09.000000000 -0400
@@ -751,7 +751,12 @@
 			info2 |= (EHCI_TUNE_MULT_HS << 30);
 		} else if (type == PIPE_BULK) {
 			info1 |= (EHCI_TUNE_RL_HS << 28);
-			info1 |= 512 << 16;	/* usb2 fixed maxpacket */
+#ifdef CONFIG_USB_EHCI_1024BYTE_BULK_PKTS
+			if ( urb->transfer_flags & URB_1024_BYTE_PKT )
+				info1 |= 1024 << 16; /* HACK for Micron Dev Kits requiring 1024 byte packets... */
+			else
+#endif
+				info1 |= 512 << 16; /* usb2 fixed maxpacket */
 			info2 |= (EHCI_TUNE_MULT_HS << 30);
 		} else {		/* PIPE_INTERRUPT */
 			info1 |= max_packet (maxp) << 16;
diff -Naur linux-2.6.20.6/include/linux/usb.h linux-2.6.20.6_jca/include/linux/usb.h
--- linux-2.6.20.6/include/linux/usb.h	2007-04-06 16:02:48.000000000 -0400
+++ linux-2.6.20.6_jca/include/linux/usb.h	2007-04-13 09:47:09.000000000 -0400
@@ -904,6 +904,9 @@
 #define URB_ZERO_PACKET		0x0040	/* Finish bulk OUT with short packet */
 #define URB_NO_INTERRUPT	0x0080	/* HINT: no non-error interrupt
 					 * needed */
+#ifdef CONFIG_USB_EHCI_1024BYTE_BULK_PKTS
+#define URB_1024_BYTE_PKT	0x8000 /* Use a max packet length of 1024 bytes instead of 512 */
+#endif
 
 struct usb_iso_packet_descriptor {
 	unsigned int offset;