[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4622FA61.4000901@alcatel-lucent.com>
Date: Mon, 16 Apr 2007 12:24:01 +0800
From: gshan <gshan@...atel-lucent.com>
To: linux-kernel@...r.kernel.org
Subject: Unable to mount root fs on unknown-block(1,0)
Hi Folks,
I got problem to boot linux 2.6.25 using u-boot-1.1.4, any ideas?
-------------------------
U-Boot 1.1.4 (Apr 14 2007 - 00:57:01)
CPU: XPC850xxZTB at 50 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: 8 MB
FLASH: 4 MB
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Hit any key to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 90.0.0.1; our IP address is 90.0.0.2
Filename 'uImage'.
Load address: 0x100000
Loading: #################################################################
#################################################################
################################
done
Bytes transferred = 825541 (c98c5 hex)
=> printenv
bootdelay=5
baudrate=9600
loads_echo=1
ethact=SCC ETHERNET
netmask=0xff000000
vlan=0xffff
nvlan=0xffff
clocks_in_mhz=1
bootcmd=tftp 0x100000 uImage
autostart=no
filesize=c98c5
fileaddr=100000
ipaddr=90.0.0.2
serverip=90.0.0.1
bootargs=root=/dev/ram rw
stdin=serial
stdout=serial
stderr=serial
Environment size: 293/16380 bytes
=> bdinfo
memstart = 0x00000000
memsize = 0x00800000
flashstart = 0x10000000
flashsize = 0x00400000
flashoffset = 0x00021000
sramstart = 0x00000000
sramsize = 0x00800000
immr_base = 0xFFF00000
bootflags = 0x00000001
intfreq = 50 MHz
busfreq = 50 MHz
ethaddr = 00:00:00:00:00:00
IP addr = 90.0.0.2
baudrate = 9600 bps
=> tftp 0x200000 aaa
Using SCC ETHERNET device
TFTP from server 90.0.0.1; our IP address is 90.0.0.2
Filename 'aaa'.
Load address: 0x200000
Loading: #
done
Bytes transferred = 776 (308 hex)
=> bootm 0x100000 0x200000
## Booting image at 00100000 ...
Image Name: Linux-2.6.15
Created: 2007-04-15 16:56:44 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 825477 Bytes = 806.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00200000 ...
Image Name: ramdisk
Created: 2007-04-15 17:31:31 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 712 Bytes = 0.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 007b8000, end 007b82c8 ... OK
Linux version 2.6.15 (root@...alhost.localdomain) (gcc version 4.0.0
(DENX ELDK 4.0 4.0.0)) #182 Mon Apr 16 00:56:43 CST 2007
Built 1 zonelists
Kernel command line: root=/dev/ram rw
PID hash table entries: 64 (order: 6, 1024 bytes)
50
Decrementer Frequency = 187500000/60
Console: colour dummy device 80x25
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 6236k available (1408k kernel code, 364k data, 84k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 0k freed
NET: Registered protocol family 16
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Serial: CPM driver $Revision: 0.01 $
ttyCPM0 at MMIO 0xfff00a80 (irq = 20) is a CPM UART
RAMDISK driver initialized: 2 RAM disks of 1024K size 1024 blocksize
loop: loaded (max 8 devices)
eth0: CPM ENET Version 0.2 on SCC1, 00:00:00:00:00:00
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: -1, 2048 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(1,0)
<0>Rebooting in 180 seconds..
Thanks,
Gavin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists