| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <462609D1.50300@bx.jp.nec.com>
Date: Wed, 18 Apr 2007 21:06:41 +0900
From: Keiichi KII <k-keiichi@...jp.nec.com>
To: mpm@...enic.com
CC: davem@...emloft.net, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: [RFC][PATCH -mm take4 2/6] support multiple logging
From: Keiichi KII <k-keiichi@...jp.nec.com>
This patch contains the following changes for supporting multiple logging
agents.
1. extend netconsole to multiple netpolls
To send kernel messages to multiple logging agents, extend netcosnole
to be able to use multiple netpolls. Each netpoll sends kernel messages
to its own logging agent.
2. change config parameter format
We change config parameter format from single configuration to multiple
configurations separated by ';'.
ex) sending kernel messages to destination1 and destination2 using eth0.
modprobe netconsole \
netconsole="@/eth0,@[destination1]/;@/eth0,@[destination2]/"
3. introduce CONFIG_NETCONSOLE_DYNCON config to change between
existing netconsole and netconsole applying the above function.
Signed-off-by: Keiichi KII <k-keiichi@...jp.nec.com>
Signed-off-by: Takayoshi Kochi <t-kochi@...jp.nec.com>
---
Index: mm/drivers/net/netconsole.c
===================================================================
--- mm.orig/drivers/net/netconsole.c
+++ mm/drivers/net/netconsole.c
@@ -61,15 +61,102 @@ static struct netpoll np = {
.remote_port = 6666,
.remote_mac = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
};
-static int configured = 0;
#define MAX_PRINT_CHUNK 1000
+#ifdef CONFIG_NETCONSOLE_DYNCON
+struct netconsole_target {
+ struct list_head list;
+ int id;
+ struct netpoll np;
+};
+
+static LIST_HEAD(target_list);
+static DEFINE_SPINLOCK(target_list_lock);
+
+static int add_target(char* target_config);
+static void remove_target(struct netconsole_target *nt);
+static void cleanup_netconsole(void);
+
+static int add_target(char* target_config)
+{
+ int retval = 0;
+ static atomic_t target_count = ATOMIC_INIT(0);
+ struct netconsole_target *new_target;
+
+ new_target = kzalloc(sizeof(*new_target), GFP_KERNEL);
+ if (!new_target) {
+ printk(KERN_ERR "netconsole: kmalloc() failed!\n");
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ new_target->np = np;
+ if (netpoll_parse_options(&new_target->np, target_config)) {
+ printk(KERN_ERR "netconsole: can't parse config:%s\n",
+ target_config);
+ kfree(new_target);
+ retval = -EINVAL;
+ goto out;
+ }
+ if (netpoll_setup(&new_target->np)) {
+ printk(KERN_ERR "netconsole: can't setup netpoll:%s\n",
+ target_config);
+ kfree(new_target);
+ retval = -EINVAL;
+ goto out;
+ }
+
+ new_target->id = atomic_inc_return(&target_count);
+
+ printk(KERN_INFO "netconsole: add target: "
+ "remote ip_addr=%d.%d.%d.%d remote port=%d\n",
+ HIPQUAD(new_target->np.remote_ip), new_target->np.remote_port);
+
+ spin_lock(&target_list_lock);
+ list_add(&new_target->list, &target_list);
+ spin_unlock(&target_list_lock);
+
+ out:
+ return retval;
+}
+
+static void remove_target(struct netconsole_target *nt)
+{
+ spin_lock(&target_list_lock);
+ list_del(&nt->list);
+ if (list_empty(&target_list))
+ netpoll_cleanup(&nt->np);
+ spin_unlock(&target_list_lock);
+ kfree(nt);
+}
+#endif /* CONFIG_NETCONSOLE_DYNCON */
+
static void write_msg(struct console *con, const char *msg, unsigned int len)
{
int frag, left;
unsigned long flags;
+#ifdef CONFIG_NETCONSOLE_DYNCON
+ struct netconsole_target *target;
+
+ if (list_empty(&target_list))
+ return;
+ local_irq_save(flags);
+ spin_lock(&target_list_lock);
+
+ for(left = len; left; ) {
+ frag = min(left, MAX_PRINT_CHUNK);
+ list_for_each_entry(target, &target_list, list) {
+ netpoll_send_udp(&target->np, msg, frag);
+ }
+ msg += frag;
+ left -= frag;
+ }
+
+ spin_unlock(&target_list_lock);
+ local_irq_restore(flags);
+#else
if (!np.dev)
return;
@@ -83,6 +170,7 @@ static void write_msg(struct console *co
}
local_irq_restore(flags);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
}
static struct console netconsole = {
@@ -91,39 +179,60 @@ static struct console netconsole = {
.write = write_msg
};
+#ifndef MODULE
static int __init option_setup(char *opt)
{
- configured = !netpoll_parse_options(&np, opt);
+ strncpy(config, opt, 256);
return 1;
}
__setup("netconsole=", option_setup);
+#endif
static int __init init_netconsole(void)
{
- int err;
+ char *tmp = config;
+#ifdef CONFIG_NETCONSOLE_DYNCON
+ char *p;
- if(strlen(config))
- option_setup(config);
-
- if(!configured) {
- printk("netconsole: not configured, aborting\n");
+ register_console(&netconsole);
+ if(!strlen(config)) {
+ printk(KERN_ERR "netconsole: not configured\n");
return 0;
}
-
- err = netpoll_setup(&np);
- if (err)
- return err;
-
+ while ((p = strsep(&tmp, ";")) != NULL) {
+ if (add_target(p)) {
+ printk(KERN_ERR
+ "netconsole: can't add target to netconsole\n");
+ cleanup_netconsole();
+ return -EINVAL;
+ }
+ }
+#else
+ if (!strlen(config) ||
+ netpoll_parse_options(&np, tmp) || netpoll_setup(&np)) {
+ printk(KERN_ERR "netconsole: can't parse config:%s\n", tmp);
+ return -EINVAL;
+ }
register_console(&netconsole);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
printk(KERN_INFO "netconsole: network logging started\n");
return 0;
}
static void cleanup_netconsole(void)
{
+#ifdef CONFIG_NETCONSOLE_DYNCON
+ struct netconsole_target *nt, *tmp;
+
+ unregister_console(&netconsole);
+ list_for_each_entry_safe(nt, tmp, &target_list, list) {
+ remove_target(nt);
+ }
+#else
unregister_console(&netconsole);
netpoll_cleanup(&np);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
}
module_init(init_netconsole);
Index: mm/drivers/net/Kconfig
===================================================================
--- mm.orig/drivers/net/Kconfig
+++ mm/drivers/net/Kconfig
@@ -2986,6 +2986,14 @@ config NETCONSOLE
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
+config NETCONSOLE_DYNCON
+ default y
+ bool "Support for multiple logging and UI for netconsole"
+ depends on NETCONSOLE
+ ---help---
+ This option enables multiple logging and changing dynamically
+ configurations (e.g. IP adderss, port number and so on)
+ by using sysfs and ioctl.
endif #NETDEVICES
config NETPOLL
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists