| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070420120026.GF21752@zarina>
Date: Fri, 20 Apr 2007 16:00:26 +0400
From: Anton Vorontsov <cbou@...l.ru>
To: linux-kernel@...r.kernel.org
Cc: kernel-discuss@...dhelds.org
Subject: [PATCH 6/7] ds2760 W1 slave
This is W1 slave for ds2760 chip, found inside almost every HP iPaq and
HTC PDAs/phones.
Signed-off-by: Anton Vorontsov <cbou@...l.ru>
---
drivers/w1/slaves/Kconfig | 13 +++
drivers/w1/slaves/Makefile | 1 +
drivers/w1/slaves/w1_ds2760.c | 162 +++++++++++++++++++++++++++++++++++++++++
drivers/w1/slaves/w1_ds2760.h | 50 +++++++++++++
drivers/w1/w1_family.h | 1 +
5 files changed, 227 insertions(+), 0 deletions(-)
create mode 100644 drivers/w1/slaves/w1_ds2760.c
create mode 100644 drivers/w1/slaves/w1_ds2760.h
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 904e5ae..df95d6c 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -35,4 +35,17 @@ config W1_SLAVE_DS2433_CRC
Each block has 30 bytes of data and a two byte CRC16.
Full block writes are only allowed if the CRC is valid.
+config W1_SLAVE_DS2760
+ tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
+ depends on W1
+ help
+ If you enable this you will have the DS2760 battery monitor
+ chip support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 725dcfd..a8eb752 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -5,4 +5,5 @@
obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
+obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
new file mode 100644
index 0000000..1bd1c6d
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -0,0 +1,162 @@
+/*
+ * 1-Wire implementation for the ds2760 chip
+ *
+ * Copyright (c) 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@....hu>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_ds2760.h"
+
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return 0;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (addr > DS2760_DATA_SIZE || addr < 0) {
+ count = 0;
+ goto out;
+ }
+ if (addr + count > DS2760_DATA_SIZE)
+ count = DS2760_DATA_SIZE - addr;
+
+ if (!w1_reset_select_slave(sl)) {
+ if (!io) {
+ w1_write_8(sl->master, W1_DS2760_READ_DATA);
+ w1_write_8(sl->master, addr);
+ count = w1_read_block(sl->master, buf, count);
+ } else {
+ w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+ w1_write_8(sl->master, addr);
+ w1_write_block(sl->master, buf, count);
+ /* XXX w1_write_block returns void, not n_written */
+ }
+ }
+
+out:
+ mutex_unlock(&sl->master->mutex);
+
+ return count;
+}
+
+int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
+{
+ return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
+{
+ return w1_ds2760_io(dev, buf, addr, count, 1);
+}
+
+#if 0
+/* Code below works, but unused currently, thus produces "defined but not
+ * used" warning. It stays here for reference and future needs, feel free
+ * to drop "#if 0" when you're about to use it. */
+
+/* io = 0 means copy from EEPROM to SRAM, 1 means from SRAM to EEPROM */
+static int w1_ds2760_eeprom(struct device *dev, int addr, int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (!w1_reset_select_slave(sl)) {
+ if (!io)
+ w1_write_8(sl->master, W1_DS2760_RECALL_DATA);
+ else
+ w1_write_8(sl->master, W1_DS2760_COPY_DATA);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->mutex);
+
+ return ret;
+}
+
+static int w1_ds2760_recall(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom(dev, addr, 0);
+}
+
+static int w1_ds2760_copy(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom(dev, addr, 1);
+}
+#endif
+
+static ssize_t w1_ds2760_read_bin(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ return w1_ds2760_read(dev, buf, off, count);
+}
+
+static struct bin_attribute w1_ds2760_bin_attr = {
+ .attr = {
+ .name = "w1_slave",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = DS2760_DATA_SIZE,
+ .read = w1_ds2760_read_bin,
+};
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
+{
+ return sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
+}
+
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
+{
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
+}
+
+static struct w1_family_ops w1_ds2760_fops = {
+ .add_slave = w1_ds2760_add_slave,
+ .remove_slave = w1_ds2760_remove_slave,
+};
+
+static struct w1_family w1_ds2760_family = {
+ .fid = W1_FAMILY_DS2760,
+ .fops = &w1_ds2760_fops,
+};
+
+static int __init w1_ds2760_init(void)
+{
+ printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor "
+ " chip - (c) 2004-2005, Szabolcs Gyurko\n");
+ return w1_register_family(&w1_ds2760_family);
+}
+
+static void __exit w1_ds2760_exit(void)
+{
+ w1_unregister_family(&w1_ds2760_family);
+}
+
+EXPORT_SYMBOL(w1_ds2760_read);
+EXPORT_SYMBOL(w1_ds2760_write);
+
+module_init(w1_ds2760_init);
+module_exit(w1_ds2760_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@....hu>");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
new file mode 100644
index 0000000..0ee92b9
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -0,0 +1,50 @@
+/*
+ * 1-Wire implementation for the ds2760 chip
+ *
+ * Copyright (c) 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@....hu>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#ifndef __w1_ds2760_h__
+#define __w1_ds2760_h__
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP 0xAA
+#define W1_DS2760_READ_DATA 0x69
+#define W1_DS2760_WRITE_DATA 0x6C
+#define W1_DS2760_COPY_DATA 0x48
+#define W1_DS2760_RECALL_DATA 0xB8
+#define W1_DS2760_LOCK 0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE 0x40
+
+#define DS2760_PROTECTION_REG 0x00
+#define DS2760_STATUS_REG 0x01
+#define DS2760_EEPROM_REG 0x07
+#define DS2760_SPECIAL_FEATURE_REG 0x08
+#define DS2760_VOLTAGE_MSB 0x0c
+#define DS2760_VOLTAGE_LSB 0x0d
+#define DS2760_CURRENT_MSB 0x0e
+#define DS2760_CURRENT_LSB 0x0f
+#define DS2760_CURRENT_ACCUM_MSB 0x10
+#define DS2760_CURRENT_ACCUM_LSB 0x11
+#define DS2760_TEMP_MSB 0x18
+#define DS2760_TEMP_LSB 0x19
+#define DS2760_EEPROM_BLOCK0 0x20
+#define DS2760_ACTIVE_FULL 0x20
+#define DS2760_EEPROM_BLOCK1 0x30
+#define DS2760_RATED_CAPACITY 0x32
+#define DS2760_CURRENT_OFFSET_BIAS 0x33
+#define DS2760_ACTIVE_EMPTY 0x3b
+
+extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
+ size_t count);
+extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
+ size_t count);
+
+#endif /* !__w1_ds2760_h__ */
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 1e2ac40..ef1e1da 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -33,6 +33,7 @@
#define W1_THERM_DS1822 0x22
#define W1_EEPROM_DS2433 0x23
#define W1_THERM_DS18B20 0x28
+#define W1_FAMILY_DS2760 0x30
#define MAXNAMELEN 32
--
1.5.1.1-dirty
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists