[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070420145126.GC25051@redhat.com>
Date: Fri, 20 Apr 2007 10:51:26 -0400
From: Dave Jones <davej@...hat.com>
To: Jeremy Fitzhardinge <jeremy@...p.org>
Cc: Adrian Bunk <bunk@...sta.de>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
pavel@...e.cz, linux-pm@...ts.osdl.org,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...e.hu>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
"Rafael J. Wysocki" <rjw@...k.pl>, gregkh@...e.de
Subject: Re: [2/2] 2.6.21-rc7: known regressions
On Thu, Apr 19, 2007 at 10:33:39PM -0700, Jeremy Fitzhardinge wrote:
> Dave Jones wrote:
> > Hmm, given you hit the hpet problems and I didn't I think our X60's
> > aren't quite so similar. Mine is the one with the swivelly touchscreen
> > tablet-pc mode. I understand they made a regular 'laptop' X60 too,
> > is that the one you have perhaps?
>
> Yes, mine is a normal laptop X60. Still, its hard to imagine how they
> could be very different; same CPU, same chipset, same graphics. The
> main difference is that your's has a Wacom tablet, presumably attached
> to USB.
>
> Details attached. How does it compare to your machine?
-1142MB HIGHMEM available.
+118MB HIGHMEM available.
So you have more RAM than I do :)
-NX (Execute Disable) protection: active
You enabled PAE, I didn't..
(Though I have tried both, makes no difference)
DMI present.
+Using APIC driver default
Hmm.
ACPI: RSDP 000F67B0, 0024 (r2 LENOVO)
-ACPI: XSDT 7F6D1896, 008C (r1 LENOVO TP-7B 2060 LTP 0)
-ACPI: FACP 7F6D1A00, 00F4 (r3 LENOVO TP-7B 2060 LNVO 1)
+ACPI: XSDT 3F6D12F5, 008C (r1 LENOVO TP-7J 1050 LTP 0)
+ACPI: FACP 3F6D1400, 00F4 (r3 LENOVO TP-7J 1050 LNVO 1)
BIOS differences (lots of these)
-Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
+Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
Probably due to the RAM differences shuffling the memmap.
-Kernel command line: ro root=LABEL=/ acpi_sleep=s3_bios combined_mode=libata
+Kernel command line: ro root=/dev/VolGroup00/LogVol00 profile=1
Hmm. I tried..
acpi_sleep=s3_bios
acpi_sleep=s3_mode
acpi_sleep=s3_bios,s3_mode
all did nothing for me.
-CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
+CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
Probably PAE
-CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
+CPU0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz stepping 0c
slightly different CPU, but probably not enough to make any difference.
-BUG: at arch/i386/kernel/sched-clock.c:170 init_sched_clock()
- [<c01091b5>] show_trace_log_lvl+0x1a/0x30
- [<c010980c>] show_trace+0x12/0x14
- [<c01098cb>] dump_stack+0x16/0x18
- [<c0468dbd>] init_sched_clock+0x58/0x9b
- [<c0461502>] init+0x14b/0x241
- [<c0108d97>] kernel_thread_helper+0x7/0x10
- =======================
heh, one for Ingo :)
-ACPI: ACPI Dock Station Driver
-ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
-ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
-ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
Hmm, I should try without the dock stuff built.
-PCI: Using MMCONFIG
+PCI: PCI BIOS revision 2.10 entry at 0xfd82b, last bus=24
+PCI: Using configuration type 1
Think I've tried with and without MMCONFIG
-pnp: PnP ACPI: found 11 devices
+pnp: PnP ACPI: found 13 devices
My Wacom tablet is one of them. There's also a mysterious 13th device :)
ibm_acpi: IBM ThinkPad ACPI Extras v0.13
ibm_acpi: http://ibm-acpi.sf.net/
-ibm_acpi: ThinkPad EC firmware 7BHT37WW-1.10
+ibm_acpi: ThinkPad EC firmware 7JHT12WW-1.03
possibly just because of the touchscreen.
So most of the differences seem to be BIOS/firmware rather than hardware.
The PCI bus layout is identical for eg.
Looking at your .config, I notice that you don't have CONFIG_FB_BACKLIGHT set
(because you don't have any framebuffer drivers that use it enabled).
Can you enable say.. CONFIG_FB_RADEON=m and CONFIG_FB_RADEON_BACKLIGHT=y
(which should turn on CONFIG_FB_BACKLIGHT=y by dependancy), and see if
it stops working for you? (You don't even need to load radeonfb.ko, just
have it compiled).
Dave
--
http://www.codemonkey.org.uk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists