[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20074201532.jhCN1hLvxaAengJm@cisco.com>
Date: Fri, 20 Apr 2007 15:32:37 -0700
From: Roland Dreier <rolandd@...co.com>
To: general@...ts.openfabrics.org, linux-kernel@...r.kernel.org
Subject: [PATCH 6/6] [RFC]mlx4 build system stuff
Hook up mlx4_core and mlx4_ib drivers to Kconfig and Makefiles.
Signed-off-by: Roland Dreier <rolandd@...co.com>
---
infiniband/Kconfig | 2 ++
infiniband/Makefile | 1 +
infiniband/hw/mlx4/Kconfig | 9 +++++++++
infiniband/hw/mlx4/Makefile | 3 +++
net/Kconfig | 14 ++++++++++++++
net/Makefile | 1 +
net/mlx4/Makefile | 4 ++++
7 files changed, 34 insertions(+)
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 82afba5..37deaae 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -45,6 +45,8 @@ source "drivers/infiniband/hw/ehca/Kconfig"
source "drivers/infiniband/hw/amso1100/Kconfig"
source "drivers/infiniband/hw/cxgb3/Kconfig"
+source "drivers/infiniband/hw/mlx4/Kconfig"
+
source "drivers/infiniband/ulp/ipoib/Kconfig"
source "drivers/infiniband/ulp/srp/Kconfig"
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index da2066c..75f325e 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_INFINIBAND_IPATH) += hw/ipath/
obj-$(CONFIG_INFINIBAND_EHCA) += hw/ehca/
obj-$(CONFIG_INFINIBAND_AMSO1100) += hw/amso1100/
obj-$(CONFIG_INFINIBAND_CXGB3) += hw/cxgb3/
+obj-$(CONFIG_MLX4_INFINIBAND) += hw/mlx4/
obj-$(CONFIG_INFINIBAND_IPOIB) += ulp/ipoib/
obj-$(CONFIG_INFINIBAND_SRP) += ulp/srp/
obj-$(CONFIG_INFINIBAND_ISER) += ulp/iser/
diff --git a/drivers/infiniband/hw/mlx4/Kconfig b/drivers/infiniband/hw/mlx4/Kconfig
new file mode 100644
index 0000000..b8912cd
--- /dev/null
+++ b/drivers/infiniband/hw/mlx4/Kconfig
@@ -0,0 +1,9 @@
+config MLX4_INFINIBAND
+ tristate "Mellanox ConnectX HCA support"
+ depends on INFINIBAND
+ select MLX4_CORE
+ ---help---
+ This driver provides low-level InfiniBand support for
+ Mellanox ConnectX PCI Express host channel adapters (HCAs).
+ This is required to use InfiniBand protocols such as
+ IP-over-IB or SRP with these devices.
diff --git a/drivers/infiniband/hw/mlx4/Makefile b/drivers/infiniband/hw/mlx4/Makefile
new file mode 100644
index 0000000..70f09c7
--- /dev/null
+++ b/drivers/infiniband/hw/mlx4/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MLX4_INFINIBAND) += mlx4_ib.o
+
+mlx4_ib-y := ah.o cq.o doorbell.o mad.o main.o mr.o qp.o srq.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c3f9f59..842f020 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2493,6 +2493,20 @@ config PASEMI_MAC
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
+config MLX4_CORE
+ tristate
+ depends on PCI
+ default n
+
+config MLX4_DEBUG
+ bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
+ default y
+ ---help---
+ This option causes debugging code to be compiled into the
+ mlx4_core driver. The output can be turned on via the
+ debug_level module parameter (which can also be set after
+ the driver is loaded through sysfs).
+
endmenu
source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 33af833..1604e1a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -197,6 +197,7 @@ obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_MACB) += macb.o
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
new file mode 100644
index 0000000..4f18889
--- /dev/null
+++ b/drivers/net/mlx4/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_MLX4_CORE) += mlx4_core.o
+
+mlx4_core-y := alloc.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o mr.o \
+ pd.o profile.o qp.o reset.o srq.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists