[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070422141423.GA8928@infradead.org>
Date: Sun, 22 Apr 2007 15:14:24 +0100
From: Christoph Hellwig <hch@...radead.org>
To: Alan Cox <alan@...rguk.ukuu.org.uk>, rene@...ctcode.de,
todorovic.s@...glemail.com
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: InitIO SCSI: Volunteers required
On Fri, Apr 20, 2007 at 10:38:49AM +0100, Alan Cox wrote:
> I'm looking for some testers for a revamp of the initio driver. No real
> code changes other than to hopefully stop it exploding on load on 64bit,
> but a major reorganisation, commenting and "de-windowsification" so the
> code is actually readable and I can do the pci_find_device to
> pci_get_device transitions.
Once again a pci_get_device conversation isn't all that helpfull at all.
fortunately in this case I've done a patch to convert this driver to
proper pci probing in 2004, and I've attached the forward-ported version
below now that we've actually found some testers that weren't locatable
back then..
This doesn't change much outside the initialization and irq code, so
any additional de-crappyfication will hopefully apply ontop.
Signed-off-by: Christoph Hellwig <hch@....de>
Index: linux-2.6/drivers/scsi/initio.c
===================================================================
--- linux-2.6.orig/drivers/scsi/initio.c 2007-04-22 15:06:10.000000000 +0200
+++ linux-2.6/drivers/scsi/initio.c 2007-04-22 15:10:17.000000000 +0200
@@ -3,6 +3,7 @@
*
* Copyright (c) 1994-1998 Initio Corporation
* Copyright (c) 1998 Bas Vermeulen <bvermeul@...ckstar.xs4all.nl>
+ * Copyright (c) 2004 Christoph Hellwig <hch@....de>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -137,60 +138,17 @@
#include "initio.h"
#define SENSE_SIZE 14
-
#define i91u_MAXQUEUE 2
-#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
-#define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */
-#define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */
-#define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */
-#define I920_DEVICE_ID 0x0002 /* Initio's other product ID */
+#define DEBUG_QUEUE 0
+#define DEBUG_STATE 0
#ifdef DEBUG_i91u
static unsigned int i91u_debug = DEBUG_DEFAULT;
-#endif
-
-#define TUL_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
-
-typedef struct PCI_ID_Struc {
- unsigned short vendor_id;
- unsigned short device_id;
-} PCI_ID;
-
-static int tul_num_ch = 4; /* Maximum 4 adapters */
-static int tul_num_scb;
-static int tul_tag_enable = 1;
-static SCB *tul_scb;
-
-#ifdef DEBUG_i91u
static int setup_debug = 0;
#endif
static void i91uSCBPost(BYTE * pHcb, BYTE * pScb);
-
-/* PCI Devices supported by this driver */
-static struct pci_device_id i91u_pci_devices[] = {
- { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { }
-};
-MODULE_DEVICE_TABLE(pci, i91u_pci_devices);
-
-#define DEBUG_INTERRUPT 0
-#define DEBUG_QUEUE 0
-#define DEBUG_STATE 0
-#define INT_DISC 0
-
-/*--- external functions --*/
-static void tul_se2_wait(void);
-
-/*--- forward refrence ---*/
-static SCB *tul_find_busy_scb(HCS * pCurHcb, WORD tarlun);
-static SCB *tul_find_done_scb(HCS * pCurHcb);
-
static int tulip_main(HCS * pCurHcb);
static int tul_next_state(HCS * pCurHcb);
@@ -239,16 +197,11 @@ static int tul_se2_rd_all(WORD CurBase);
static void tul_se2_update_all(WORD CurBase); /* setup default pattern */
static void tul_read_eeprom(WORD CurBase);
- /* ---- INTERNAL VARIABLES ---- */
-static HCS tul_hcs[MAX_SUPPORTED_ADAPTERS];
-static INI_ADPT_STRUCT i91u_adpt[MAX_SUPPORTED_ADAPTERS];
-
/*NVRAM nvram, *nvramp = &nvram; */
static NVRAM i91unvram;
static NVRAM *i91unvramp;
-
static UCHAR i91udftNvRam[64] =
{
/*----------- header -----------*/
@@ -582,52 +535,6 @@ void tul_read_eeprom(WORD CurBase)
TUL_WR(CurBase + TUL_GCTRL, gctrl & ~TUL_GCTRL_EEPROM_BIT);
} /* read_eeprom */
-static int Addi91u_into_Adapter_table(WORD wBIOS, WORD wBASE, BYTE bInterrupt,
- BYTE bBus, BYTE bDevice)
-{
- int i, j;
-
- for (i = 0; i < MAX_SUPPORTED_ADAPTERS; i++) {
- if (i91u_adpt[i].ADPT_BIOS < wBIOS)
- continue;
- if (i91u_adpt[i].ADPT_BIOS == wBIOS) {
- if (i91u_adpt[i].ADPT_BASE == wBASE) {
- if (i91u_adpt[i].ADPT_Bus != 0xFF)
- return 1;
- } else if (i91u_adpt[i].ADPT_BASE < wBASE)
- continue;
- }
- for (j = MAX_SUPPORTED_ADAPTERS - 1; j > i; j--) {
- i91u_adpt[j].ADPT_BASE = i91u_adpt[j - 1].ADPT_BASE;
- i91u_adpt[j].ADPT_INTR = i91u_adpt[j - 1].ADPT_INTR;
- i91u_adpt[j].ADPT_BIOS = i91u_adpt[j - 1].ADPT_BIOS;
- i91u_adpt[j].ADPT_Bus = i91u_adpt[j - 1].ADPT_Bus;
- i91u_adpt[j].ADPT_Device = i91u_adpt[j - 1].ADPT_Device;
- }
- i91u_adpt[i].ADPT_BASE = wBASE;
- i91u_adpt[i].ADPT_INTR = bInterrupt;
- i91u_adpt[i].ADPT_BIOS = wBIOS;
- i91u_adpt[i].ADPT_Bus = bBus;
- i91u_adpt[i].ADPT_Device = bDevice;
- return 0;
- }
- return 1;
-}
-
-static void init_i91uAdapter_table(void)
-{
- int i;
-
- for (i = 0; i < MAX_SUPPORTED_ADAPTERS; i++) { /* Initialize adapter structure */
- i91u_adpt[i].ADPT_BIOS = 0xffff;
- i91u_adpt[i].ADPT_BASE = 0xffff;
- i91u_adpt[i].ADPT_INTR = 0xff;
- i91u_adpt[i].ADPT_Bus = 0xff;
- i91u_adpt[i].ADPT_Device = 0xff;
- }
- return;
-}
-
static void tul_stop_bm(HCS * pCurHcb)
{
@@ -640,15 +547,6 @@ static void tul_stop_bm(HCS * pCurHcb)
}
/***************************************************************************/
-static void get_tulipPCIConfig(HCS * pCurHcb, int ch_idx)
-{
- pCurHcb->HCS_Base = i91u_adpt[ch_idx].ADPT_BASE; /* Supply base address */
- pCurHcb->HCS_BIOS = i91u_adpt[ch_idx].ADPT_BIOS; /* Supply BIOS address */
- pCurHcb->HCS_Intr = i91u_adpt[ch_idx].ADPT_INTR; /* Supply interrupt line */
- return;
-}
-
-/***************************************************************************/
static int tul_reset_scsi(HCS * pCurHcb, int seconds)
{
TUL_WR(pCurHcb->HCS_Base + TUL_SCtrl0, TSC_RST_BUS);
@@ -667,41 +565,11 @@ static int tul_reset_scsi(HCS * pCurHcb,
return (SCSI_RESET_SUCCESS);
}
-/***************************************************************************/
-static int init_tulip(HCS * pCurHcb, SCB * scbp, int tul_num_scb,
- BYTE * pbBiosAdr, int seconds)
+static void init_tulip(HCS *pCurHcb, BYTE *pbBiosAdr)
{
int i;
BYTE *pwFlags;
BYTE *pbHeads;
- SCB *pTmpScb, *pPrevScb = NULL;
-
- pCurHcb->HCS_NumScbs = tul_num_scb;
- pCurHcb->HCS_Semaph = 1;
- spin_lock_init(&pCurHcb->HCS_SemaphLock);
- pCurHcb->HCS_JSStatus0 = 0;
- pCurHcb->HCS_Scb = scbp;
- pCurHcb->HCS_NxtPend = scbp;
- pCurHcb->HCS_NxtAvail = scbp;
- for (i = 0, pTmpScb = scbp; i < tul_num_scb; i++, pTmpScb++) {
- pTmpScb->SCB_TagId = i;
- if (i != 0)
- pPrevScb->SCB_NxtScb = pTmpScb;
- pPrevScb = pTmpScb;
- }
- pPrevScb->SCB_NxtScb = NULL;
- pCurHcb->HCS_ScbEnd = pTmpScb;
- pCurHcb->HCS_FirstAvail = scbp;
- pCurHcb->HCS_LastAvail = pPrevScb;
- spin_lock_init(&pCurHcb->HCS_AvailLock);
- pCurHcb->HCS_FirstPend = NULL;
- pCurHcb->HCS_LastPend = NULL;
- pCurHcb->HCS_FirstBusy = NULL;
- pCurHcb->HCS_LastBusy = NULL;
- pCurHcb->HCS_FirstDone = NULL;
- pCurHcb->HCS_LastDone = NULL;
- pCurHcb->HCS_ActScb = NULL;
- pCurHcb->HCS_ActTcs = NULL;
tul_read_eeprom(pCurHcb->HCS_Base);
/*---------- get H/A configuration -------------*/
@@ -773,17 +641,13 @@ static int init_tulip(HCS * pCurHcb, SCB
pCurHcb->HCS_ActTags[i] = 0;
pCurHcb->HCS_MaxTags[i] = 0xFF;
} /* for */
- printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
- pCurHcb->HCS_Base, pCurHcb->HCS_Intr,
- pCurHcb->HCS_BIOS, pCurHcb->HCS_SCSI_ID);
/*------------------- reset SCSI Bus ---------------------------*/
if (pCurHcb->HCS_Config & HCC_SCSI_RESET) {
printk("i91u: Reset SCSI Bus ... \n");
- tul_reset_scsi(pCurHcb, seconds);
+ tul_reset_scsi(pCurHcb, 10);
}
TUL_WR(pCurHcb->HCS_Base + TUL_SCFG1, 0x17);
TUL_WR(pCurHcb->HCS_Base + TUL_SIntEnable, 0xE9);
- return (0);
}
/***************************************************************************/
@@ -1149,8 +1013,6 @@ static int tul_bad_seq(HCS * pCurHcb)
{
SCB *pCurScb;
- printk("tul_bad_seg c=%d\n", pCurHcb->HCS_Index);
-
if ((pCurScb = pCurHcb->HCS_ActScb) != NULL) {
tul_unlink_busy_scb(pCurHcb, pCurScb);
pCurScb->SCB_HaStat = HOST_BAD_PHAS;
@@ -1304,27 +1166,6 @@ static void tul_exec_scb(HCS * pCurHcb,
}
/***************************************************************************/
-static int tul_isr(HCS * pCurHcb)
-{
- /* Enter critical section */
-
- if (TUL_RD(pCurHcb->HCS_Base, TUL_Int) & TSS_INT_PENDING) {
- if (pCurHcb->HCS_Semaph == 1) {
- TUL_WR(pCurHcb->HCS_Base + TUL_Mask, 0x1F);
- /* Disable Tulip SCSI Int */
- pCurHcb->HCS_Semaph = 0;
-
- tulip_main(pCurHcb);
-
- pCurHcb->HCS_Semaph = 1;
- TUL_WR(pCurHcb->HCS_Base + TUL_Mask, 0x0F);
- return (1);
- }
- }
- return (0);
-}
-
-/***************************************************************************/
int tulip_main(HCS * pCurHcb)
{
SCB *pCurScb;
@@ -2750,134 +2591,27 @@ int tul_wait_done_disc(HCS * pCurHcb)
static irqreturn_t i91u_intr(int irqno, void *dev_id)
{
- struct Scsi_Host *dev = dev_id;
+ struct Scsi_Host *shost = dev_id;
+ HCS *pCurHcb = (HCS *)shost->hostdata;
unsigned long flags;
-
- spin_lock_irqsave(dev->host_lock, flags);
- tul_isr((HCS *)dev->base);
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static int tul_NewReturnNumberOfAdapters(void)
-{
- struct pci_dev *pDev = NULL; /* Start from none */
- int iAdapters = 0;
- long dRegValue;
- WORD wBIOS;
- int i = 0;
- init_i91uAdapter_table();
+ if (!TUL_RD(pCurHcb->HCS_Base, TUL_Int) & TSS_INT_PENDING)
+ return IRQ_NONE;
- for (i = 0; i < ARRAY_SIZE(i91u_pci_devices); i++)
- {
- while ((pDev = pci_find_device(i91u_pci_devices[i].vendor, i91u_pci_devices[i].device, pDev)) != NULL) {
- if (pci_enable_device(pDev))
- continue;
- pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
- wBIOS = (UWORD) (dRegValue & 0xFF);
- if (((dRegValue & 0xFF00) >> 8) == 0xFF)
- dRegValue = 0;
- wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
- if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING
- "i91u: Could not set 32 bit DMA mask\n");
- continue;
- }
-
- if (Addi91u_into_Adapter_table(wBIOS,
- (pDev->resource[0].start),
- pDev->irq,
- pDev->bus->number,
- (pDev->devfn >> 3)
- ) == 0)
- iAdapters++;
- }
- }
-
- return (iAdapters);
-}
-
-static int i91u_detect(struct scsi_host_template * tpnt)
-{
- HCS *pHCB;
- struct Scsi_Host *hreg;
- unsigned long i; /* 01/14/98 */
- int ok = 0, iAdapters;
- ULONG dBiosAdr;
- BYTE *pbBiosAdr;
-
- /* Get total number of adapters in the motherboard */
- iAdapters = tul_NewReturnNumberOfAdapters();
- if (iAdapters == 0) /* If no tulip founded, return */
- return (0);
-
- tul_num_ch = (iAdapters > tul_num_ch) ? tul_num_ch : iAdapters;
- /* Update actually channel number */
- if (tul_tag_enable) { /* 1.01i */
- tul_num_scb = MAX_TARGETS * i91u_MAXQUEUE;
- } else {
- tul_num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
- } /* Update actually SCBs per adapter */
-
- /* Get total memory needed for HCS */
- i = tul_num_ch * sizeof(HCS);
- memset((unsigned char *) &tul_hcs[0], 0, i); /* Initialize tul_hcs 0 */
- /* Get total memory needed for SCB */
-
- for (; tul_num_scb >= MAX_TARGETS + 3; tul_num_scb--) {
- i = tul_num_ch * tul_num_scb * sizeof(SCB);
- if ((tul_scb = kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
- break;
- }
- if (tul_scb == NULL) {
- printk("i91u: SCB memory allocation error\n");
- return (0);
- }
- memset((unsigned char *) tul_scb, 0, i);
-
- for (i = 0, pHCB = &tul_hcs[0]; /* Get pointer for control block */
- i < tul_num_ch;
- i++, pHCB++) {
- get_tulipPCIConfig(pHCB, i);
-
- dBiosAdr = pHCB->HCS_BIOS;
- dBiosAdr = (dBiosAdr << 4);
-
- pbBiosAdr = phys_to_virt(dBiosAdr);
-
- init_tulip(pHCB, tul_scb + (i * tul_num_scb), tul_num_scb, pbBiosAdr, 10);
- request_region(pHCB->HCS_Base, 256, "i91u"); /* Register */
+ spin_lock_irqsave(shost->host_lock, flags);
+ if (pCurHcb->HCS_Semaph == 1) {
+ TUL_WR(pCurHcb->HCS_Base + TUL_Mask, 0x1F);
+ /* Disable Tulip SCSI Int */
+ pCurHcb->HCS_Semaph = 0;
- pHCB->HCS_Index = i; /* 7/29/98 */
- hreg = scsi_register(tpnt, sizeof(HCS));
- if(hreg == NULL) {
- release_region(pHCB->HCS_Base, 256);
- return 0;
- }
- hreg->io_port = pHCB->HCS_Base;
- hreg->n_io_port = 0xff;
- hreg->can_queue = tul_num_scb; /* 03/05/98 */
- hreg->unique_id = pHCB->HCS_Base;
- hreg->max_id = pHCB->HCS_MaxTar;
- hreg->max_lun = 32; /* 10/21/97 */
- hreg->irq = pHCB->HCS_Intr;
- hreg->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */
- hreg->base = (unsigned long)pHCB;
- hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
+ tulip_main(pCurHcb);
- /* Initial tulip chip */
- ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
- if (ok < 0) {
- printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
- return 0;
- }
+ pCurHcb->HCS_Semaph = 1;
+ TUL_WR(pCurHcb->HCS_Base + TUL_Mask, 0x0F);
}
- tpnt->this_id = -1;
- tpnt->can_queue = 1;
-
- return 1;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ return IRQ_HANDLED;
}
static void i91uBuildSCB(HCS * pHCB, SCB * pSCB, struct scsi_cmnd * SCpnt)
@@ -2951,8 +2685,8 @@ static void i91uBuildSCB(HCS * pHCB, SCB
static int i91u_queuecommand(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
- HCS *pHCB = (HCS *) cmd->device->host->base;
- register SCB *pSCB;
+ HCS *pHCB = (HCS *)cmd->device->host->hostdata;
+ SCB *pSCB;
cmd->scsi_done = done;
@@ -2972,9 +2706,7 @@ static int i91u_queuecommand(struct scsi
*/
static int i91u_abort(struct scsi_cmnd * SCpnt)
{
- HCS *pHCB;
-
- pHCB = (HCS *) SCpnt->device->host->base;
+ HCS *pHCB = (HCS *) SCpnt->device->host->hostdata;
return tul_abort_srb(pHCB, SCpnt);
}
@@ -2986,7 +2718,7 @@ static int i91u_reset(struct scsi_cmnd *
{ /* I need Host Control Block Information */
HCS *pHCB;
- pHCB = (HCS *) SCpnt->device->host->base;
+ pHCB = (HCS *) SCpnt->device->host->hostdata;
if (reset_flags & (SCSI_RESET_SUGGEST_BUS_RESET | SCSI_RESET_SUGGEST_HOST_RESET))
return tul_reset_scsi_bus(pHCB);
@@ -2997,9 +2729,7 @@ static int i91u_reset(struct scsi_cmnd *
static int i91u_bus_reset(struct scsi_cmnd * SCpnt)
{
- HCS *pHCB;
-
- pHCB = (HCS *) SCpnt->device->host->base;
+ HCS *pHCB = (HCS *) SCpnt->device->host->hostdata;
spin_lock_irq(SCpnt->device->host->host_lock);
tul_reset_scsi(pHCB, 0);
@@ -3014,11 +2744,8 @@ static int i91u_bus_reset(struct scsi_cm
static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
sector_t capacity, int *info_array)
{
- HCS *pHcb; /* Point to Host adapter control block */
- TCS *pTcb;
-
- pHcb = (HCS *) sdev->host->base;
- pTcb = &pHcb->HCS_Tcs[sdev->id];
+ HCS *pHcb = (HCS *)sdev->host->hostdata;
+ TCS *pTcb = &pHcb->HCS_Tcs[sdev->id];
if (pTcb->TCS_DrvHead) {
info_array[0] = pTcb->TCS_DrvHead;
@@ -3143,32 +2870,179 @@ static void i91uSCBPost(BYTE * pHcb, BYT
tul_release_scb(pHCB, pSCB); /* Release SCB for current channel */
}
-/*
- * Release ressources
- */
-static int i91u_release(struct Scsi_Host *hreg)
+static struct scsi_host_template initio_template = {
+ .proc_name = "INI9100U",
+ .name = "Initio INI-9X00U/UW SCSI device driver",
+ .queuecommand = i91u_queuecommand,
+ .eh_bus_reset_handler = i91u_bus_reset,
+ .bios_param = i91u_biosparam,
+ .can_queue = MAX_TARGETS * i91u_MAXQUEUE,
+ .this_id = 1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int __devinit initio_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
- free_irq(hreg->irq, hreg);
- release_region(hreg->io_port, 256);
+ struct Scsi_Host *shost;
+ HCS *pHCB;
+ SCB *pTmpScb, *pPrevScb = NULL, *scbp;
+ long dRegValue;
+ WORD wBIOS;
+ int error, i;
+
+ error = pci_enable_device(pdev);
+ if (error)
+ goto out;
+
+ pci_read_config_dword(pdev, 0x44, (u32 *) &dRegValue);
+ wBIOS = (UWORD) (dRegValue & 0xFF);
+ if (((dRegValue & 0xFF00) >> 8) == 0xFF)
+ dRegValue = 0;
+ wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+ printk(KERN_WARNING
+ "initio: Could not set 32 bit DMA mask\n");
+ error = -ENODEV;
+ goto out_disable_device;
+ }
+
+ shost = scsi_host_alloc(&initio_template, sizeof(HCS));
+ if (!shost) {
+ printk(KERN_WARNING
+ "initio: Could not allocate host structure.k\n");
+ error = -ENOMEM;
+ goto out_disable_device;
+ }
+
+ pHCB = (HCS *)shost->hostdata;
+ memset(pHCB, 0, sizeof(HCS));
+
+ pHCB->HCS_Base = pci_resource_start(pdev, 0);
+
+ if (!request_region(pHCB->HCS_Base, 256, "i91u")) {
+ printk(KERN_WARNING "initio: io port 0x%x, is busy.\n", pHCB->HCS_Base);
+ error = -ENODEV;
+ goto out_host_put;
+ }
+
+ pHCB->HCS_NumScbs = MAX_TARGETS * i91u_MAXQUEUE;
+
+ scbp = kmalloc(pHCB->HCS_NumScbs * sizeof(SCB), GFP_DMA);
+ if (!scbp) {
+ printk(KERN_WARNING "initio: cannot allocated SCB array.\n");
+ error = -ENOMEM;
+ goto out_release_region;
+ }
+ memset(scbp, 0, pHCB->HCS_NumScbs * sizeof(SCB));
+
+ pHCB->HCS_Semaph = 1;
+ spin_lock_init(&pHCB->HCS_SemaphLock);
+ pHCB->HCS_Scb = scbp;
+ pHCB->HCS_NxtPend = scbp;
+ pHCB->HCS_NxtAvail = scbp;
+ for (i = 0, pTmpScb = scbp; i < pHCB->HCS_NumScbs; i++, pTmpScb++) {
+ pTmpScb->SCB_TagId = i;
+ if (i != 0)
+ pPrevScb->SCB_NxtScb = pTmpScb;
+ pPrevScb = pTmpScb;
+ }
+ pHCB->HCS_ScbEnd = pTmpScb;
+ pHCB->HCS_FirstAvail = scbp;
+ pHCB->HCS_LastAvail = pPrevScb;
+ spin_lock_init(&pHCB->HCS_AvailLock);
+
+ init_tulip(pHCB, phys_to_virt(wBIOS << 4));
+
+ shost->io_port = pHCB->HCS_Base;
+ shost->n_io_port = 0xff;
+ shost->unique_id = pHCB->HCS_Base;
+ shost->max_id = pHCB->HCS_MaxTar;
+ shost->max_lun = 32;
+ shost->irq = pdev->irq;
+ shost->this_id = pHCB->HCS_SCSI_ID;
+ shost->base = pHCB->HCS_Base;
+ shost->sg_tablesize = TOTAL_SG_ENTRY;
+
+ error = request_irq(pdev->irq, i91u_intr,
+ IRQF_DISABLED|IRQF_SHARED, "i91u", shost);
+ if (error < 0) {
+ printk(KERN_WARNING "initio: unable to request IRQ %d\n",
+ pdev->irq);
+ goto out_free_scbs;
+ }
+
+ pci_set_drvdata(pdev, shost);
+
+ error = scsi_add_host(shost, &pdev->dev);
+ if (error)
+ goto out_free_irq;
+
+ scsi_scan_host(shost);
return 0;
-}
-MODULE_LICENSE("Dual BSD/GPL");
-static struct scsi_host_template driver_template = {
- .proc_name = "INI9100U",
- .name = i91u_REVID,
- .detect = i91u_detect,
- .release = i91u_release,
- .queuecommand = i91u_queuecommand,
-// .abort = i91u_abort,
-// .reset = i91u_reset,
- .eh_bus_reset_handler = i91u_bus_reset,
- .bios_param = i91u_biosparam,
- .can_queue = 1,
- .this_id = 1,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING,
+ out_free_irq:
+ free_irq(pdev->irq, shost);
+ out_free_scbs:
+ kfree(pHCB->HCS_Scb);
+ out_release_region:
+ release_region(pHCB->HCS_Base, 256);
+ out_host_put:
+ scsi_host_put(shost);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void __devexit initio_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ HCS *pHCB = (HCS *)shost->hostdata;
+
+ scsi_remove_host(shost);
+
+ free_irq(pdev->irq, shost);
+ release_region(pHCB->HCS_Base, 256);
+
+ scsi_host_put(shost);
+ kfree(pHCB->HCS_Scb);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id initio_pci_tbl[] = {
+ {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
+
+static struct pci_driver initio_pci_driver = {
+ .name = "initio",
+ .id_table = initio_pci_tbl,
+ .probe = initio_probe_one,
+ .remove = __devexit_p(initio_remove_one),
};
-#include "scsi_module.c"
+static int __init initio_init(void)
+{
+ return pci_register_driver(&initio_pci_driver);
+}
+
+static void __exit initio_exit(void)
+{
+ pci_unregister_driver(&initio_pci_driver);
+}
+
+MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
+MODULE_AUTHOR("Initio Corporation");
+MODULE_LICENSE("Dual BSD/GPL");
+
+module_init(initio_init);
+module_exit(initio_exit);
Index: linux-2.6/drivers/scsi/initio.h
===================================================================
--- linux-2.6.orig/drivers/scsi/initio.h 2007-04-22 15:06:11.000000000 +0200
+++ linux-2.6/drivers/scsi/initio.h 2007-04-22 15:06:30.000000000 +0200
@@ -523,28 +523,16 @@ typedef struct Tar_Ctrl_Struc {
#define TCF_DRV_EN_TAG 0x0800
#define TCF_DRV_255_63 0x0400
-typedef struct I91u_Adpt_Struc {
- UWORD ADPT_BIOS; /* 0 */
- UWORD ADPT_BASE; /* 1 */
- UBYTE ADPT_Bus; /* 2 */
- UBYTE ADPT_Device; /* 3 */
- UBYTE ADPT_INTR; /* 4 */
-} INI_ADPT_STRUCT;
-
-
/***********************************************************************
Host Adapter Control Structure
************************************************************************/
typedef struct Ha_Ctrl_Struc {
UWORD HCS_Base; /* 00 */
- UWORD HCS_BIOS; /* 02 */
- UBYTE HCS_Intr; /* 04 */
UBYTE HCS_SCSI_ID; /* 05 */
UBYTE HCS_MaxTar; /* 06 */
UBYTE HCS_NumScbs; /* 07 */
UBYTE HCS_Flags; /* 08 */
- UBYTE HCS_Index; /* 09 */
UBYTE HCS_HaId; /* 0A */
UBYTE HCS_Config; /* 0B */
UWORD HCS_IdMask; /* 0C */
@@ -681,14 +669,8 @@ typedef struct _NVRAM {
#define DISC_ALLOW 0xC0 /* Disconnect is allowed */
#define SCSICMD_RequestSense 0x03
-typedef struct _HCSinfo {
- ULONG base;
- UCHAR vec;
- UCHAR bios; /* High byte of BIOS address */
- USHORT BaseAndBios; /* high byte: pHcsInfo->bios,low byte:pHcsInfo->base */
-} HCSINFO;
-
#define TUL_RD(x,y) (UCHAR)(inb( (int)((ULONG)(x+y)) ))
+#define TUL_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
#define TUL_RDLONG(x,y) (ULONG)(inl((int)((ULONG)(x+y)) ))
#define TUL_WR( adr,data) outb( (UCHAR)(data), (int)(adr))
#define TUL_WRSHORT(adr,data) outw( (UWORD)(data), (int)(adr))
@@ -717,4 +699,3 @@ typedef struct _HCSinfo {
#define SCSI_RESET_BUS_RESET 0x100
#define SCSI_RESET_HOST_RESET 0x200
#define SCSI_RESET_ACTION 0xff
-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists