[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1177347358.28021.24294.camel@hal.voltaire.com>
Date: 23 Apr 2007 12:55:59 -0400
From: Hal Rosenstock <halr@...taire.com>
To: Joachim Fenkes <fenkes@...ibm.com>
Cc: LinuxPPC-Dev <linuxppc-dev@...abs.org>,
LKML <linux-kernel@...r.kernel.org>,
OF-General <general@...ts.openfabrics.org>,
Roland Dreier <rolandd@...co.com>
Subject: Re: [ofa-general] [PATCH] eHCA: Add "Modify Port" verb
Hi Joachim,
On Mon, 2007-04-23 at 12:23, Joachim Fenkes wrote:
> Add "Modify Port" verb support to eHCA driver.
> ib_cm needs this to initialize properly.
>
>
> Signed-off-by: Joachim Fenkes <fenkes@...ibm.com>
> ---
>
> ehca_hca.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++--
> hcp_if.c | 24 ++++++++++++++++++++++++
> hcp_if.h | 4 ++++
> 3 files changed, 74 insertions(+), 2 deletions(-)
>
> diff -urp a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
> --- a/drivers/infiniband/hw/ehca/ehca_hca.c 2007-02-04 19:44:54.000000000 +0100
> +++ b/drivers/infiniband/hw/ehca/ehca_hca.c 2007-04-23 18:09:38.000000000 +0200
> @@ -147,6 +147,7 @@ int ehca_query_port(struct ib_device *ib
> break;
> }
>
> + props->port_cap_flags = rblock->capability_mask;
> props->gid_tbl_len = rblock->gid_tbl_len;
> props->max_msg_sz = rblock->max_msg_sz;
> props->bad_pkey_cntr = rblock->bad_pkey_cntr;
> @@ -233,10 +234,53 @@ query_gid1:
> return ret;
> }
>
> +const u32 allowed_port_caps = (
> + IB_PORT_SM | IB_PORT_LED_INFO_SUP | IB_PORT_CM_SUP |
> + IB_PORT_SNMP_TUNNEL_SUP | IB_PORT_DEVICE_MGMT_SUP |
> + IB_PORT_VENDOR_CLASS_SUP);
I didn't think IB_PORT_SM was allowed (as QP0 is not exposed) or does
this just fail later when it is attempted to be actually set ?
-- Hal
> +
> int ehca_modify_port(struct ib_device *ibdev,
> u8 port, int port_modify_mask,
> struct ib_port_modify *props)
> {
> - /* Not implemented yet */
> - return -EFAULT;
> + int ret = 0;
> + struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, ib_device);
> + struct hipz_query_port *rblock;
> + u32 cap;
> + u64 hret;
> +
> + if ((props->set_port_cap_mask | props->clr_port_cap_mask)
> + & ~allowed_port_caps) {
> + ehca_err(&shca->ib_device, "Non-changeable bits set in masks "
> + "set=%x clr=%x allowed=%x", props->set_port_cap_mask,
> + props->clr_port_cap_mask, allowed_port_caps);
> + return -EINVAL;
> + }
> +
> + rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
> + if (!rblock) {
> + ehca_err(&shca->ib_device, "Can't allocate rblock memory.");
> + return -ENOMEM;
> + }
> +
> + if (hipz_h_query_port(shca->ipz_hca_handle, port, rblock) != H_SUCCESS) {
> + ehca_err(&shca->ib_device, "Can't query port properties");
> + ret = -EINVAL;
> + goto modify_port1;
> + }
> +
> + cap = (rblock->capability_mask | props->set_port_cap_mask)
> + & ~props->clr_port_cap_mask;
> +
> + hret = hipz_h_modify_port(shca->ipz_hca_handle, port,
> + cap, props->init_type, port_modify_mask);
> + if (hret != H_SUCCESS) {
> + ehca_err(&shca->ib_device, "Modify port failed hret=%lx", hret);
> + ret = -EINVAL;
> + }
> +
> +modify_port1:
> + ehca_free_fw_ctrlblock(rblock);
> +
> + return ret;
> }
> diff -urp a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
> --- a/drivers/infiniband/hw/ehca/hcp_if.c 2007-02-04 19:44:54.000000000 +0100
> +++ b/drivers/infiniband/hw/ehca/hcp_if.c 2007-04-23 18:06:09.000000000 +0200
> @@ -70,6 +70,10 @@
> #define H_ALL_RES_QP_SQUEUE_SIZE_PAGES EHCA_BMASK_IBM(0, 31)
> #define H_ALL_RES_QP_RQUEUE_SIZE_PAGES EHCA_BMASK_IBM(32, 63)
>
> +#define H_MP_INIT_TYPE EHCA_BMASK_IBM(44, 47)
> +#define H_MP_SHUTDOWN EHCA_BMASK_IBM(48, 48)
> +#define H_MP_RESET_QKEY_CTR EHCA_BMASK_IBM(49, 49)
> +
> /* direct access qp controls */
> #define DAQP_CTRL_ENABLE 0x01
> #define DAQP_CTRL_SEND_COMP 0x20
> @@ -364,6 +368,26 @@ u64 hipz_h_query_port(const struct ipz_a
> return ret;
> }
>
> +u64 hipz_h_modify_port(const struct ipz_adapter_handle adapter_handle,
> + const u8 port_id, const u32 port_cap,
> + const u8 init_type, const int modify_mask)
> +{
> + u64 port_attributes = port_cap;
> +
> + if (modify_mask & IB_PORT_SHUTDOWN)
> + port_attributes |= EHCA_BMASK_SET(H_MP_SHUTDOWN, 1);
> + if (modify_mask & IB_PORT_INIT_TYPE)
> + port_attributes |= EHCA_BMASK_SET(H_MP_INIT_TYPE, init_type);
> + if (modify_mask & IB_PORT_RESET_QKEY_CNTR)
> + port_attributes |= EHCA_BMASK_SET(H_MP_RESET_QKEY_CTR, 1);
> +
> + return ehca_plpar_hcall_norets(H_MODIFY_PORT,
> + adapter_handle.handle, /* r4 */
> + port_id, /* r5 */
> + port_attributes, /* r6 */
> + 0, 0, 0, 0);
> +}
> +
> u64 hipz_h_query_hca(const struct ipz_adapter_handle adapter_handle,
> struct hipz_query_hca *query_hca_rblock)
> {
> diff -urp a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
> --- a/drivers/infiniband/hw/ehca/hcp_if.h 2007-02-04 19:44:54.000000000 +0100
> +++ b/drivers/infiniband/hw/ehca/hcp_if.h 2007-04-23 18:06:09.000000000 +0200
> @@ -85,6 +85,10 @@ u64 hipz_h_query_port(const struct ipz_a
> const u8 port_id,
> struct hipz_query_port *query_port_response_block);
>
> +u64 hipz_h_modify_port(const struct ipz_adapter_handle adapter_handle,
> + const u8 port_id, const u32 port_cap,
> + const u8 init_type, const int modify_mask);
> +
> u64 hipz_h_query_hca(const struct ipz_adapter_handle adapter_handle,
> struct hipz_query_hca *query_hca_rblock);
>
>
> _______________________________________________
> general mailing list
> general@...ts.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists