lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1177712499.3688.25.camel@mulgrave.il.steeleye.com>
Date:	Fri, 27 Apr 2007 17:21:39 -0500
From:	James Bottomley <James.Bottomley@...elEye.com>
To:	Bob Tracy <rct@...rkin.frus.com>
Cc:	linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org
Subject: Re: BAD_SG_DMA panic in aha1542

On Fri, 2007-04-27 at 16:47 -0500, Bob Tracy wrote:
> I previously reported an ISA DMA issue for the 2.6.12 kernel.  The issue
> persists through at least 2.6.18.  SCSI controller is an Adaptec
> AHA-1542B (ISA).
> 
> The action "mount -t iso9660 /dev/scd0 /mnt/cdrom -r"
> 
> produces
> 
> (cdrom detection messages as various modules autoload, then...)

Knowing what these messages are is would be helpful; it tells me what
point in the initialisation it got to. 

> sgpnt[0:1] page c1ee5af0/0x1ee5af0 length 32
> Kernel panic - not syncing: Buffer at physical address > 16 Mb used for aha1542
> 
> As before, no problems using the sda hard disk (which is the boot drive):
> everything works reliably until I touch the cdrom drive.
> 
> I'll be happy to assist with the debugging, but the system with the
> aha1542 has no development facilities, i.e., I'll have to build test
> kernels on a different system, and turnaround is going to be slow :-(.

I'm interested.

This is clearly a use_sg==1 path that has failed to bounce the buffer
for some reason ... and I was contemplating eliminating the GFP_DMA from
our sr driver because I thought the block bouncing had it covered.

It might also be helpful to apply this patch.  It should give a stack
trace of the problem command and not immediately panic the box.

Thanks,

James

diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 1d239f6..4ee7d99 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -75,7 +75,7 @@ static void BAD_SG_DMA(Scsi_Cmnd * SCpnt,
 	/*
 	 * Not safe to continue.
 	 */
-	panic("Buffer at physical address > 16Mb used for aha1542");
+	WARN_ON(1);
 }
 
 #include<linux/stat.h>
@@ -725,8 +725,12 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 				panic("Foooooooood fight!");
 			};
 			any2scsi(cptr[i].dataptr, SCSI_SG_PA(&sgpnt[i]));
-			if (SCSI_SG_PA(&sgpnt[i]) + sgpnt[i].length - 1 > ISA_DMA_THRESHOLD)
+			if (SCSI_SG_PA(&sgpnt[i]) + sgpnt[i].length - 1 > ISA_DMA_THRESHOLD) {
 				BAD_SG_DMA(SCpnt, sgpnt, SCpnt->use_sg, i);
+				SCpnt->result = DID_ERROR << 16;
+				done(SCpnt);
+				return 0;
+			}
 			any2scsi(cptr[i].datalen, sgpnt[i].length);
 		};
 		any2scsi(ccb[mbo].datalen, SCpnt->use_sg * sizeof(struct chain));




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ