Message-Id: <11777142633770-git-send-email-gregkh@suse.de>
Date:	Fri, 27 Apr 2007 15:50:57 -0700
From:	Greg Kroah-Hartman <gregkh@...e.de>
To:	linux-kernel@...r.kernel.org
Cc:	torvalds@...l.org, Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH 2/3] UIO: Documentation

From: Hans J. Koch <hjk@...utronix.de>

Documentation for the UIO interface

From: Hans J. Koch <hjk@...utronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
 Documentation/DocBook/kernel-api.tmpl |    4 +
 Documentation/DocBook/uio-howto.tmpl  |  498 +++++++++++++++++++++++++++++++++
 2 files changed, 502 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/DocBook/uio-howto.tmpl

diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 0bb9023..40e968d 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -396,6 +396,10 @@ X!Edrivers/pnp/system.c
 !Edrivers/pnp/manager.c
 !Edrivers/pnp/support.c
      </sect1>
+     <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+     </sect1>
   </chapter>
 
   <chapter id="blkdev">
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
new file mode 100644
index 0000000..bd2209f
--- /dev/null
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -0,0 +1,498 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<article id="index">
+<articleinfo>
+<title>The Userspace I/O HOWTO</title>
+
+<author>
+      <firstname>Hans-Jürgen</firstname>
+      <surname>Koch</surname>
+      <authorblurb><para>Linux developer, Linutronix</para></authorblurb>
+	<affiliation>
+	<orgname>
+		<ulink url="http://www.linutronix.de">Linutronix</ulink>
+	</orgname>
+
+	<address>
+	   <email>hjk@...utronix.de</email>
+	</address>
+    </affiliation>
+</author>
+
+<pubdate>2006-12-11</pubdate>
+
+<abstract>
+	<para>This HOWTO describes concept and usage of Linux kernel's
+		Userspace I/O system.</para>
+</abstract>
+
+<revhistory>
+	<revision>
+	<revnumber>0.2</revnumber>
+	<date>2007-02-13</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Update after multiple mappings were added.</revremark>
+	</revision>
+	<revision>
+	<revnumber>0.1</revnumber>
+	<date>2006-12-11</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>First draft.</revremark>
+	</revision>
+</revhistory>
+</articleinfo>
+
+<sect1 id="aboutthisdoc">
+<?dbhtml filename="about.html"?>
+<title>About this document</title>
+
+<sect2 id="copyright">
+<?dbhtml filename="copyright.html"?>
+<title>Copyright and License</title>
+<para>
+      Copyright (c) 2006 by Hans-Jürgen Koch.</para>
+<para>
+This documentation is Free Software licensed under the terms of the
+GPL version 2.
+</para>
+</sect2>
+
+<sect2 id="translations">
+<?dbhtml filename="translations.html"?>
+<title>Translations</title>
+
+<para>If you know of any translations for this document, or you are
+interested in translating it, please email me
+<email>hjk@...utronix.de</email>.
+</para>
+</sect2>
+
+<sect2 id="preface">
+<title>Preface</title>
+	<para>
+	For many types of devices, creating a Linux kernel driver is
+	overkill.  All that is really needed is some way to handle an
+	interrupt and provide access to the memory space of the
+	device.  The logic of controlling the device does not
+	necessarily have to be within the kernel, as the device does
+	not need to take advantage of any of other resources that the
+	kernel provides.  One such common class of devices that are
+	like this are for industrial I/O cards.
+	</para>
+	<para>
+	To address this situation, the userspace I/O system (UIO) was
+	designed.  For typical industrial I/O cards, only a very small
+	kernel module is needed. The main part of the driver will run in
+	user space. This simplifies development and reduces the risk of
+	serious bugs within a kernel module.
+	</para>
+</sect2>
+
+<sect2 id="thanks">
+<title>Acknowledgments</title>
+	<para>I'd like to thank Thomas Gleixner and Benedikt Spranger of
+	Linutronix, who have not only written most of the UIO code, but also
+	helped greatly writing this HOWTO by giving me all kinds of background
+	information.</para>
+</sect2>
+
+<sect2 id="feedback">
+<title>Feedback</title>
+	<para>Find something wrong with this document? (Or perhaps something
+	right?) I would love to hear from you. Please email me at
+	<email>hjk@...utronix.de</email>.</para>
+</sect2>
+</sect1>
+
+<sect1 id="about">
+<?dbhtml filename="about.html"?>
+<title>About UIO</title>
+
+<para>If you use UIO for your card's driver, here's what you get:</para>
+
+<itemizedlist>
+<listitem>
+	<para>only one small kernel module to write and maintain.</para>
+</listitem>
+<listitem>
+	<para>develop the main part of your driver in user space,
+	with all the tools and libraries you're used to.</para>
+</listitem>
+<listitem>
+	<para>bugs in your driver won't crash the kernel.</para>
+</listitem>
+<listitem>
+	<para>updates of your driver can take place without recompiling
+	the kernel.</para>
+</listitem>
+<listitem>
+	<para>if you need to keep some parts of your driver closed source,
+	you can do so without violating the GPL license on the kernel.</para>
+</listitem>
+</itemizedlist>
+
+<sect2 id="how_uio_works">
+<title>How UIO works</title>
+	<para>
+	Each UIO device is accessed through a device file and several
+	sysfs attribute files. The device file will be called
+	<filename>/dev/uio0</filename> for the first device, and
+	<filename>/dev/uio1</filename>, <filename>/dev/uio2</filename>
+	and so on for subsequent devices.
+	</para>
+
+	<para><filename>/dev/uioX</filename> is used to access the
+	address space of the card. Just use
+	<function>mmap()</function> to access registers or RAM
+	locations of your card.
+	</para>
+
+	<para>
+	Interrupts are handled by reading from
+	<filename>/dev/uioX</filename>. A blocking
+	<function>read()</function> from
+	<filename>/dev/uioX</filename> will return as soon as an
+	interrupt occurs. You can also use
+	<function>select()</function> on
+	<filename>/dev/uioX</filename> to wait for an interrupt. The
+	integer value read from <filename>/dev/uioX</filename>
+	represents the total interrupt count. You can use this number
+	to figure out if you missed some interrupts.
+	</para>
+
+	<para>
+	To handle interrupts properly, your custom kernel module can
+	provide its own interrupt handler. It will automatically be
+	called by the built-in handler.
+	</para>
+
+	<para>
+	For cards that don't generate interrupts but need to be
+	polled, there is the possibility to set up a timer that
+	triggers the interrupt handler at configurable time intervals.
+	See <filename>drivers/uio/uio_dummy.c</filename> for an
+	example of this technique.
+	</para>
+
+	<para>
+	Each driver provides attributes that are used to read or write
+	variables. These attributes are accessible through sysfs
+	files.  A custom kernel driver module can add its own
+	attributes to the device owned by the uio driver, but not added
+	to the UIO device itself at this time.  This might change in the
+	future if it would be found to be useful
+	</para>
+
+	<para>
+	The following standard attributes are provided by the UIO
+	framework:
+	</para>
+<itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: The name of your device. It is
+	recommended to use the name of your kernel module for this.
+	</para>
+</listitem>
+<listitem>
+	<para>
+	<filename>version</filename>: A version string defined by your
+	driver. This allows the user space part of your driver to deal
+	with different versions of the kernel module.
+	</para>
+</listitem>
+<listitem>
+	<para>
+	<filename>event</filename>: The total number of interrupts
+	handled by the driver since the last time the device node was
+	read.
+	</para>
+</listitem>
+</itemizedlist>
+<para>
+	These attributes appear under the
+	<filename>/sys/class/uio/uioX</filename> directory.  Please
+	note that this directory might be a symlink, and not a real
+	directory.  Any userspace code that accesses it must be able
+	to handle this.
+</para>
+<para>
+	Each UIO device can make one or more memory regions available for
+	memory mapping. This is necessary because some industrial I/O cards
+	require access to more than one PCI memory region in a driver.
+</para>
+<para>
+	Each mapping has its own directory in sysfs, the first mapping
+	appears as <filename>/sys/class/uio/uioX/maps/map0/</filename>.
+	Subsequent mappings create directories <filename>map1/</filename>,
+	<filename>map2/</filename>, and so on. These directories will only
+	appear if the size of the mapping is not 0.
+</para>
+<para>
+	Each <filename>mapX/</filename> directory contains two read-only files
+	that show start address and size of the memory:
+</para>
+<itemizedlist>
+<listitem>
+	<para>
+	<filename>addr</filename>: The address of memory that can be mapped.
+	</para>
+</listitem>
+<listitem>
+	<para>
+	<filename>size</filename>: The size, in bytes, of the memory
+	pointed to by addr.
+	</para>
+</listitem>
+</itemizedlist>
+
+<para>
+	From userspace, the different mappings are distinguished by adjusting
+	the <varname>offset</varname> parameter of the
+	<function>mmap()</function> call. To map the memory of mapping N, you
+	have to use N times the page size as your offset:
+</para>
+<programlisting format="linespecific">
+offset = N * getpagesize();
+</programlisting>
+
+</sect2>
+</sect1>
+
+<sect1 id="using-uio_dummy" xreflabel="Using uio_dummy">
+<?dbhtml filename="using-uio_dummy.html"?>
+<title>Using uio_dummy</title>
+	<para>
+	Well, there is no real use for uio_dummy. Its only purpose is
+	to test most parts of the UIO system (everything except
+	hardware interrupts), and to serve as an example for the
+	kernel module that you will have to write yourself.
+	</para>
+
+<sect2 id="what_uio_dummy_does">
+<title>What uio_dummy does</title>
+	<para>
+	The kernel module <filename>uio_dummy.ko</filename> creates a
+	device that uses a timer to generate periodic interrupts. The
+	interrupt handler does nothing but increment a counter. The
+	driver adds two custom attributes, <varname>count</varname>
+	and <varname>freq</varname>, that appear under
+	<filename>/sys/devices/platform/uio_dummy/</filename>.
+	</para>
+
+	<para>
+	The attribute <varname>count</varname> can be read and
+	written.  The associated file
+	<filename>/sys/devices/platform/uio_dummy/count</filename>
+	appears as a normal text file and contains the total number of
+	timer interrupts. If you look at it (e.g. using
+	<function>cat</function>), you'll notice it is slowly counting
+	up.
+	</para>
+
+	<para>
+	The attribute <varname>freq</varname> can be read and written.
+	The content of
+	<filename>/sys/devices/platform/uio_dummy/freq</filename>
+	represents the number of system timer ticks between two timer
+	interrupts. The default value of <varname>freq</varname> is
+	the value of the kernel variable <varname>HZ</varname>, which
+	gives you an interval of one second. Lower values will
+	increase the frequency. Try the following:
+	</para>
+<programlisting format="linespecific">
+cd /sys/devices/platform/uio_dummy/
+echo 100 > freq
+</programlisting>
+	<para>
+	Use <function>cat count</function> to see how the interrupt
+	frequency changes.
+	</para>
+</sect2>
+</sect1>
+
+<sect1 id="custom_kernel_module" xreflabel="Writing your own kernel module">
+<?dbhtml filename="custom_kernel_module.html"?>
+<title>Writing your own kernel module</title>
+	<para>
+	Please have a look at <filename>uio_dummy.c</filename> as an
+	example. The following paragraphs explain the different
+	sections of this file.
+	</para>
+
+<sect2 id="uio_info">
+<title>struct uio_info</title>
+	<para>
+	This structure tells the framework the details of your driver,
+	Some of the members are required, others are optional.
+	</para>
+
+<itemizedlist>
+<listitem>
+<varname>char *name</varname>: Required. The name of your driver as
+it will appear in sysfs. I recommend using the name of your module for this.
+</listitem>
+
+<listitem>
+<varname>char *version</varname>: Required. This string appears in
+<filename>/sys/class/uio/uioX/version</filename>.
+</listitem>
+
+<listitem>
+<varname>struct uio_mem mem[ MAX_UIO_MAPS ]</varname>: Required if you
+have memory that can be mapped with <function>mmap()</function>. For each
+mapping you need to fill one of the <varname>uio_mem</varname> structures.
+See the description below for details.
+</listitem>
+
+<listitem>
+<varname>long irq</varname>: Required. If your hardware generates an
+interrupt, it's your modules task to determine the irq number during
+initialization. If you don't have a hardware generated interrupt but
+want to trigger the interrupt handler in some other way, set
+<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>. The
+uio_dummy module does this as it triggers the event mechanism in a timer
+routine. If you had no interrupt at all, you could set
+<varname>irq</varname> to <varname>UIO_IRQ_NONE</varname>, though this
+rarely makes sense.
+</listitem>
+
+<listitem>
+<varname>unsigned long irq_flags</varname>: Required if you've set
+<varname>irq</varname> to a hardware interrupt number. The flags given
+here will be used in the call to <function>request_irq()</function>.
+</listitem>
+
+<listitem>
+<varname>int (*mmap)(struct uio_info *info, struct vm_area_struct
+*vma)</varname>: Optional. If you need a special
+<function>mmap()</function> function, you can set it here. If this
+pointer is not NULL, your <function>mmap()</function> will be called
+instead of the built-in one.
+</listitem>
+
+<listitem>
+<varname>int (*open)(struct uio_info *info, struct inode *inode)
+</varname>: Optional. You might want to have your own
+<function>open()</function>, e.g. to enable interrupts only when your
+device is actually used.
+</listitem>
+
+<listitem>
+<varname>int (*release)(struct uio_info *info, struct inode *inode)
+</varname>: Optional. If you define your own
+<function>open()</function>, you will probably also want a custom
+<function>release()</function> function.
+</listitem>
+</itemizedlist>
+
+<para>
+Usually, your device will have one or more memory regions that can be mapped
+to user space. For each region, you have to set up a
+<varname>struct uio_mem</varname> in the <varname>mem[]</varname> array.
+Here's a description of the fields of <varname>struct uio_mem</varname>:
+</para>
+
+<itemizedlist>
+<listitem>
+<varname>int memtype</varname>: Required if the mapping is used. Set this to
+<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
+card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical
+memory (e.g. allocated with <function>kmalloc()</function>). There's also
+<varname>UIO_MEM_VIRTUAL</varname> for virtual memory.
+</listitem>
+
+<listitem>
+<varname>unsigned long addr</varname>: Required if the mapping is used.
+Fill in the address of your memory block. This address is the one that
+appears in sysfs.
+</listitem>
+
+<listitem>
+<varname>unsigned long size</varname>: Fill in the size of the
+memory block that <varname>addr</varname> points to. If <varname>size</varname>
+is zero, the mapping is considered unused. Note that you
+<emphasis>must</emphasis> initialize <varname>size</varname> with zero for
+all unused mappings.
+</listitem>
+
+<listitem>
+<varname>void *internal_addr</varname>: If you have to access this memory
+region from within your kernel module, you will want to map it internally by
+using something like <function>ioremap_nocache()</function>. Addresses
+returned by this function can not be mapped to user space, so you must not
+store it in <varname>addr</varname>. Use <varname>internal_addr</varname>
+instead to remember such an address.
+</listitem>
+</itemizedlist>
+
+<para>
+Please do not touch the <varname>kobj</varname> element of
+<varname>struct uio_mem</varname>! It is used by the UIO framework
+to set up sysfs files for this mapping. Simply leave it alone.
+</para>
+</sect2>
+
+<sect2 id="adding_irq_handler">
+<title>Adding an interrupt handler</title>
+	<para>
+	What you need to do in your interrupt handler depends on your
+	hardware and on how you want to	handle it. You should try to
+	keep the amount of code in your kernel interrupt handler low.
+	If your hardware requires no action that you
+	<emphasis>have</emphasis> to perform after each interrupt,
+	then your handler can be empty.</para> <para>If, on the other
+	hand, your hardware <emphasis>needs</emphasis> some action to
+	be performed after each interrupt, then you
+	<emphasis>must</emphasis> do it in your kernel module. Note
+	that you cannot rely on the userspace part of your driver.Your
+	userspace program can terminate at any time, possibly leaving
+	your hardware in a state where proper interrupt handling is
+	still required.
+	</para>
+
+	<para>
+	There might also be applications where you want to read data
+	from your hardware at each interrupt and buffer it in a piece
+	of kernel memory you've allocated for that purpose.  With this
+	technique you could avoid loss of data if your userspace
+	program misses an interrupt.
+	</para>
+
+	<para>
+	A note on shared interrupts: Your driver should support
+	interrupt sharing whenever this is possible. It is possible if
+	and only if your driver can detect whether your hardware has
+	triggered the interrupt or not. This is usually done by looking
+	at an interrupt status register. If your driver sees that the
+	IRQ bit is actually set, it will perform its actions, and the
+	handler returns IRQ_HANDLED. If the driver detects that it was
+	not your hardware that caused the interrupt, it will do nothing
+	and return IRQ_NONE, allowing the kernel to call the next
+	possible interrupt handler.
+	</para>
+
+	<para>
+	If you decide not to support shared interrupts, your card
+	won't work in computers with no free interrupts. As this
+	frequently happens on the PC platform, you can save yourself a
+	lot of trouble by supporting interrupt sharing.
+	</para>
+</sect2>
+
+</sect1>
+
+<appendix id="app1">
+<title>Further information</title>
+<itemizedlist>
+	<listitem><para>
+		<ulink url="http://www.linutronix.de">
+		 Linutronix homepage.</ulink>
+		</para></listitem>
+	<listitem><para>...</para></listitem>
+</itemizedlist>
+</appendix>
+
+</article>
-- 
1.5.1.2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists