| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 29 Apr 2007 12:53:08 +0200 (CEST)
From: Andi Kleen <ak@...e.de>
To: David Rientjes <rientjes@...gle.com>, Andi Kleen <ak@...e.de>,
Paul Jackson <pj@....com>,
Christoph Lameter <clameter@...r.sgi.com>, patches@...-64.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] [20/48] x86_64: fixed size remaining fake nodes
From: David Rientjes <rientjes@...gle.com>
Extends the numa=fake x86_64 command-line option to split the remaining system
memory into nodes of fixed size. Any leftover memory is allocated to a final
node unless the command-line ends with a comma.
For example:
numa=fake=2*512,*128 gives two 512M nodes and the remaining system
memory is split into nodes of 128M each.
This is beneficial for systems where the exact size of RAM is unknown or not
necessarily relevant, but the size of the remaining nodes to be allocated is
known based on their capacity for resource management.
Cc: Andi Kleen <ak@...e.de>
Signed-off-by: David Rientjes <rientjes@...gle.com>
Signed-off-by: Andi Kleen <ak@...e.de>
Cc: Paul Jackson <pj@....com>
Cc: Christoph Lameter <clameter@...r.sgi.com>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
---
Documentation/x86_64/boot-options.txt | 14 ++++++----
arch/x86_64/mm/numa.c | 47 ++++++++++++++++++++++++++--------
2 files changed, 46 insertions(+), 15 deletions(-)
Index: linux/Documentation/x86_64/boot-options.txt
===================================================================
--- linux.orig/Documentation/x86_64/boot-options.txt
+++ linux/Documentation/x86_64/boot-options.txt
@@ -153,11 +153,15 @@ NUMA
If a number, fakes CMDLINE nodes and ignores NUMA setup of the
actual machine. Otherwise, system memory is configured
depending on the sizes and coefficients listed. For example:
- numa=fake=2*512,1024,4*256
- gives two 512M nodes, a 1024M node, and four 256M nodes. The
- remaining system RAM is allocated to an additional node. If
- the last character of CMDLINE is a *, the remaining system RAM
- is instead divided up equally among its coefficient.
+ numa=fake=2*512,1024,4*256,*128
+ gives two 512M nodes, a 1024M node, four 256M nodes, and the
+ rest split into 128M chunks. If the last character of CMDLINE
+ is a *, the remaining memory is divided up equally among its
+ coefficient:
+ numa=fake=2*512,2*
+ gives two 512M nodes and the rest split into two nodes.
+ Otherwise, the remaining system RAM is allocated to an
+ additional node.
numa=hotadd=percent
Only allow hotadd memory to preallocate page structures upto
Index: linux/arch/x86_64/mm/numa.c
===================================================================
--- linux.orig/arch/x86_64/mm/numa.c
+++ linux/arch/x86_64/mm/numa.c
@@ -362,6 +362,21 @@ static int __init split_nodes_equally(st
}
/*
+ * Splits the remaining system RAM into chunks of size. The remaining memory is
+ * always assigned to a final node and can be asymmetric. Returns the number of
+ * nodes split.
+ */
+static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
+ u64 max_addr, int node_start, u64 size)
+{
+ int i = node_start;
+ size = (size << 20) & FAKE_NODE_MIN_HASH_MASK;
+ while (!setup_node_range(i++, nodes, addr, size, max_addr))
+ ;
+ return i - node_start;
+}
+
+/*
* Sets up the system RAM area from start_pfn to end_pfn according to the
* numa=fake command-line option.
*/
@@ -370,9 +385,10 @@ static int __init numa_emulation(unsigne
struct bootnode nodes[MAX_NUMNODES];
u64 addr = start_pfn << PAGE_SHIFT;
u64 max_addr = end_pfn << PAGE_SHIFT;
- unsigned int coeff;
- unsigned int num = 0;
int num_nodes = 0;
+ int coeff_flag;
+ int coeff = -1;
+ int num = 0;
u64 size;
int i;
@@ -390,29 +406,34 @@ static int __init numa_emulation(unsigne
}
/* Parse the command line. */
- for (coeff = 1; ; cmdline++) {
+ for (coeff_flag = 0; ; cmdline++) {
if (*cmdline && isdigit(*cmdline)) {
num = num * 10 + *cmdline - '0';
continue;
}
- if (*cmdline == '*')
- coeff = num;
+ if (*cmdline == '*') {
+ if (num > 0)
+ coeff = num;
+ coeff_flag = 1;
+ }
if (!*cmdline || *cmdline == ',') {
+ if (!coeff_flag)
+ coeff = 1;
/*
* Round down to the nearest FAKE_NODE_MIN_SIZE.
* Command-line coefficients are in megabytes.
*/
size = ((u64)num << 20) & FAKE_NODE_MIN_HASH_MASK;
- if (size) {
+ if (size)
for (i = 0; i < coeff; i++, num_nodes++)
if (setup_node_range(num_nodes, nodes,
&addr, size, max_addr) < 0)
goto done;
- coeff = 1;
- }
+ if (!*cmdline)
+ break;
+ coeff_flag = 0;
+ coeff = -1;
}
- if (!*cmdline)
- break;
num = 0;
}
done:
@@ -420,6 +441,12 @@ done:
return -1;
/* Fill remainder of system RAM, if appropriate. */
if (addr < max_addr) {
+ if (coeff_flag && coeff < 0) {
+ /* Split remaining nodes into num-sized chunks */
+ num_nodes += split_nodes_by_size(nodes, &addr, max_addr,
+ num_nodes, num);
+ goto out;
+ }
switch (*(cmdline - 1)) {
case '*':
/* Split remaining nodes into coeff chunks */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists