| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070430040238.B5B971801A4@magilla.sf.frob.com>
Date: Sun, 29 Apr 2007 21:02:38 -0700 (PDT)
From: Roland McGrath <roland@...hat.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Christoph Hellwig <hch@....de>, linux-kernel@...r.kernel.org
Subject: [PATCH] Move sig_kernel_* et al macros to linux/signal.h
This patch moves the sig_kernel_* and related macros from kernel/signal.c
to linux/signal.h, and cleans them up slightly. I need the sig_kernel_*
macros for default signal behavior in the utrace code, and want to avoid
duplication or overhead to share the knowledge.
Signed-off-by: Roland McGrath <roland@...hat.com>
---
include/linux/signal.h | 125 ++++++++++++++++++++++++++++++++++++++++++++++++
kernel/signal.c | 119 ---------------------------------------------
2 files changed, 125 insertions(+), 119 deletions(-)
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 1474905..9850667 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -243,6 +243,131 @@ extern int get_signal_to_deliver(siginfo
extern struct kmem_cache *sighand_cachep;
+/*
+ * In POSIX a signal is sent either to a specific thread (Linux task)
+ * or to the process as a whole (Linux thread group). How the signal
+ * is sent determines whether it's to one thread or the whole group,
+ * which determines which signal mask(s) are involved in blocking it
+ * from being delivered until later. When the signal is delivered,
+ * either it's caught or ignored by a user handler or it has a default
+ * effect that applies to the whole thread group (POSIX process).
+ *
+ * The possible effects an unblocked signal set to SIG_DFL can have are:
+ * ignore - Nothing Happens
+ * terminate - kill the process, i.e. all threads in the group,
+ * similar to exit_group. The group leader (only) reports
+ * WIFSIGNALED status to its parent.
+ * coredump - write a core dump file describing all threads using
+ * the same mm and then kill all those threads
+ * stop - stop all the threads in the group, i.e. TASK_STOPPED state
+ *
+ * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
+ * Other signals when not blocked and set to SIG_DFL behaves as follows.
+ * The job control signals also have other special effects.
+ *
+ * +--------------------+------------------+
+ * | POSIX signal | default action |
+ * +--------------------+------------------+
+ * | SIGHUP | terminate |
+ * | SIGINT | terminate |
+ * | SIGQUIT | coredump |
+ * | SIGILL | coredump |
+ * | SIGTRAP | coredump |
+ * | SIGABRT/SIGIOT | coredump |
+ * | SIGBUS | coredump |
+ * | SIGFPE | coredump |
+ * | SIGKILL | terminate(+) |
+ * | SIGUSR1 | terminate |
+ * | SIGSEGV | coredump |
+ * | SIGUSR2 | terminate |
+ * | SIGPIPE | terminate |
+ * | SIGALRM | terminate |
+ * | SIGTERM | terminate |
+ * | SIGCHLD | ignore |
+ * | SIGCONT | ignore(*) |
+ * | SIGSTOP | stop(*)(+) |
+ * | SIGTSTP | stop(*) |
+ * | SIGTTIN | stop(*) |
+ * | SIGTTOU | stop(*) |
+ * | SIGURG | ignore |
+ * | SIGXCPU | coredump |
+ * | SIGXFSZ | coredump |
+ * | SIGVTALRM | terminate |
+ * | SIGPROF | terminate |
+ * | SIGPOLL/SIGIO | terminate |
+ * | SIGSYS/SIGUNUSED | coredump |
+ * | SIGSTKFLT | terminate |
+ * | SIGWINCH | ignore |
+ * | SIGPWR | terminate |
+ * | SIGRTMIN-SIGRTMAX | terminate |
+ * +--------------------+------------------+
+ * | non-POSIX signal | default action |
+ * +--------------------+------------------+
+ * | SIGEMT | coredump |
+ * +--------------------+------------------+
+ *
+ * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
+ * (*) Special job control effects:
+ * When SIGCONT is sent, it resumes the process (all threads in the group)
+ * from TASK_STOPPED state and also clears any pending/queued stop signals
+ * (any of those marked with "stop(*)"). This happens regardless of blocking,
+ * catching, or ignoring SIGCONT. When any stop signal is sent, it clears
+ * any pending/queued SIGCONT signals; this happens regardless of blocking,
+ * catching, or ignored the stop signal, though (except for SIGSTOP) the
+ * default action of stopping the process may happen later or never.
+ */
+
+#ifdef SIGEMT
+#define SIGEMT_MASK rt_sigmask(SIGEMT)
+#else
+#define SIGEMT_MASK 0
+#endif
+
+#if SIGRTMIN > BITS_PER_LONG
+#define rt_sigmask(sig) (1ULL << ((sig)-1))
+#else
+#define rt_sigmask(sig) sigmask(sig)
+#endif
+#define siginmask(sig, mask) (rt_sigmask(sig) & (mask))
+
+#define SIG_KERNEL_ONLY_MASK (\
+ rt_sigmask(SIGKILL) | rt_sigmask(SIGSTOP))
+
+#define SIG_KERNEL_STOP_MASK (\
+ rt_sigmask(SIGSTOP) | rt_sigmask(SIGTSTP) | \
+ rt_sigmask(SIGTTIN) | rt_sigmask(SIGTTOU) )
+
+#define SIG_KERNEL_COREDUMP_MASK (\
+ rt_sigmask(SIGQUIT) | rt_sigmask(SIGILL) | \
+ rt_sigmask(SIGTRAP) | rt_sigmask(SIGABRT) | \
+ rt_sigmask(SIGFPE) | rt_sigmask(SIGSEGV) | \
+ rt_sigmask(SIGBUS) | rt_sigmask(SIGSYS) | \
+ rt_sigmask(SIGXCPU) | rt_sigmask(SIGXFSZ) | \
+ SIGEMT_MASK )
+
+#define SIG_KERNEL_IGNORE_MASK (\
+ rt_sigmask(SIGCONT) | rt_sigmask(SIGCHLD) | \
+ rt_sigmask(SIGWINCH) | rt_sigmask(SIGURG) )
+
+#define sig_kernel_only(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_ONLY_MASK))
+#define sig_kernel_coredump(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_COREDUMP_MASK))
+#define sig_kernel_ignore(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_IGNORE_MASK))
+#define sig_kernel_stop(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_STOP_MASK))
+
+#define sig_needs_tasklist(sig) ((sig) == SIGCONT)
+
+#define sig_user_defined(t, signr) \
+ (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
+ ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
+
+#define sig_fatal(t, signr) \
+ (!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
+ (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNAL_H */
diff --git a/kernel/signal.c b/kernel/signal.c
index 3670225..4a5e1db 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -39,125 +39,6 @@
static struct kmem_cache *sigqueue_cachep;
-/*
- * In POSIX a signal is sent either to a specific thread (Linux task)
- * or to the process as a whole (Linux thread group). How the signal
- * is sent determines whether it's to one thread or the whole group,
- * which determines which signal mask(s) are involved in blocking it
- * from being delivered until later. When the signal is delivered,
- * either it's caught or ignored by a user handler or it has a default
- * effect that applies to the whole thread group (POSIX process).
- *
- * The possible effects an unblocked signal set to SIG_DFL can have are:
- * ignore - Nothing Happens
- * terminate - kill the process, i.e. all threads in the group,
- * similar to exit_group. The group leader (only) reports
- * WIFSIGNALED status to its parent.
- * coredump - write a core dump file describing all threads using
- * the same mm and then kill all those threads
- * stop - stop all the threads in the group, i.e. TASK_STOPPED state
- *
- * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
- * Other signals when not blocked and set to SIG_DFL behaves as follows.
- * The job control signals also have other special effects.
- *
- * +--------------------+------------------+
- * | POSIX signal | default action |
- * +--------------------+------------------+
- * | SIGHUP | terminate |
- * | SIGINT | terminate |
- * | SIGQUIT | coredump |
- * | SIGILL | coredump |
- * | SIGTRAP | coredump |
- * | SIGABRT/SIGIOT | coredump |
- * | SIGBUS | coredump |
- * | SIGFPE | coredump |
- * | SIGKILL | terminate(+) |
- * | SIGUSR1 | terminate |
- * | SIGSEGV | coredump |
- * | SIGUSR2 | terminate |
- * | SIGPIPE | terminate |
- * | SIGALRM | terminate |
- * | SIGTERM | terminate |
- * | SIGCHLD | ignore |
- * | SIGCONT | ignore(*) |
- * | SIGSTOP | stop(*)(+) |
- * | SIGTSTP | stop(*) |
- * | SIGTTIN | stop(*) |
- * | SIGTTOU | stop(*) |
- * | SIGURG | ignore |
- * | SIGXCPU | coredump |
- * | SIGXFSZ | coredump |
- * | SIGVTALRM | terminate |
- * | SIGPROF | terminate |
- * | SIGPOLL/SIGIO | terminate |
- * | SIGSYS/SIGUNUSED | coredump |
- * | SIGSTKFLT | terminate |
- * | SIGWINCH | ignore |
- * | SIGPWR | terminate |
- * | SIGRTMIN-SIGRTMAX | terminate |
- * +--------------------+------------------+
- * | non-POSIX signal | default action |
- * +--------------------+------------------+
- * | SIGEMT | coredump |
- * +--------------------+------------------+
- *
- * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
- * (*) Special job control effects:
- * When SIGCONT is sent, it resumes the process (all threads in the group)
- * from TASK_STOPPED state and also clears any pending/queued stop signals
- * (any of those marked with "stop(*)"). This happens regardless of blocking,
- * catching, or ignoring SIGCONT. When any stop signal is sent, it clears
- * any pending/queued SIGCONT signals; this happens regardless of blocking,
- * catching, or ignored the stop signal, though (except for SIGSTOP) the
- * default action of stopping the process may happen later or never.
- */
-
-#ifdef SIGEMT
-#define M_SIGEMT M(SIGEMT)
-#else
-#define M_SIGEMT 0
-#endif
-
-#if SIGRTMIN > BITS_PER_LONG
-#define M(sig) (1ULL << ((sig)-1))
-#else
-#define M(sig) (1UL << ((sig)-1))
-#endif
-#define T(sig, mask) (M(sig) & (mask))
-
-#define SIG_KERNEL_ONLY_MASK (\
- M(SIGKILL) | M(SIGSTOP) )
-
-#define SIG_KERNEL_STOP_MASK (\
- M(SIGSTOP) | M(SIGTSTP) | M(SIGTTIN) | M(SIGTTOU) )
-
-#define SIG_KERNEL_COREDUMP_MASK (\
- M(SIGQUIT) | M(SIGILL) | M(SIGTRAP) | M(SIGABRT) | \
- M(SIGFPE) | M(SIGSEGV) | M(SIGBUS) | M(SIGSYS) | \
- M(SIGXCPU) | M(SIGXFSZ) | M_SIGEMT )
-
-#define SIG_KERNEL_IGNORE_MASK (\
- M(SIGCONT) | M(SIGCHLD) | M(SIGWINCH) | M(SIGURG) )
-
-#define sig_kernel_only(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_ONLY_MASK))
-#define sig_kernel_coredump(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_COREDUMP_MASK))
-#define sig_kernel_ignore(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_IGNORE_MASK))
-#define sig_kernel_stop(sig) \
- (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_STOP_MASK))
-
-#define sig_needs_tasklist(sig) ((sig) == SIGCONT)
-
-#define sig_user_defined(t, signr) \
- (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
- ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
-
-#define sig_fatal(t, signr) \
- (!T(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
- (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
static int sig_ignored(struct task_struct *t, int sig)
{
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists