lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 30 Apr 2007 22:58:47 +0200
From:	Rafał Bilski <rafalbilski@...eria.pl>
To:	linux-kernel@...r.kernel.org
Subject: Natsemi DP83815 driver spaming

Hello,

I have Wyse 3360SE terminal running Linux 2.6.21-rc7. Everything 
works great with one small exception. Natsemi DP83815 driver is 
filling log with:
> ezri user.info kernel: eth0: DSPCFG accepted after 0 usec.
> ezri user.notice kernel: eth0: Wake-up event 0x80000a
> ezri user.info kernel: eth0: Setting full-duplex based on negotiated link capability.
every 5 seconds. I can comment out these messages, but I would 
like to turn off the source of wake up event. It is a bit 
strange to see wakeup event on running system. 

Please CC me.

Thank You
Rafał

natsemi dp8381x driver, version 2.1, Sept 11, 2006
  originally by Donald Becker <becker@...ld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: Setting latency timer of device 0000:00:0f.0 to 64
natsemi eth0: NatSemi DP8381[56] at 0x10010000 (0000:00:0f.0), 00:80:64:10:c6:09, IRQ 10, port TP.

00:0f.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
	Subsystem: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2750ns min, 13000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at f800 [size=256]
	Region 1: Memory at 10010000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+



----------------------------------------------------------------------
NIE KUPUJ!!!
...zanim nie porownasz cen >> http://link.interia.pl/f1a5e



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ