linux-kernel - Re: libata /dev/scd0 problem: mount after burn fails without eject

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6bffcb0e0705010731v44cfad1awf4342121245f7ab3@mail.gmail.com>
Date:	Tue, 1 May 2007 16:31:59 +0200
From:	"Michal Piotrowski" <michal.k.k.piotrowski@...il.com>
To:	"Mark Lord" <lkml@....ca>
Cc:	"Frank van Maarseveen" <frankvm@...nkvm.com>,
	linux-scsi <linux-scsi@...r.kernel.org>,
	"IDE/ATA development list" <linux-ide@...r.kernel.org>,
	linux-kernel@...r.kernel.org, "Alan Cox" <alan@...hat.com>
Subject: Re: libata /dev/scd0 problem: mount after burn fails without eject

On 01/05/07, Mark Lord <lkml@....ca> wrote:
> Forwarding to linux-scsi and linux-ide mailing lists.
>
> Frank van Maarseveen wrote:
> > Tested on 2.6.20.6 and 2.6.21.1
> >
> > I decided to swich from the old IDE drivers to libata and now there
> > seems to be a little but annoying problem: cannot mount an ISO image
> > after burning it.
> >
> > May  1 14:32:55 kernel: attempt to access beyond end of device
> > May  1 14:32:55 kernel: sr0: rw=0, want=68, limit=4
> > May  1 14:32:55 kernel: isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
> >
> > an "eject" command seems to fix the state of the PATA DVD writer
> > or driver. The problem occurs for burning a CD and for DVD too with
> > identical error messages.
> >
> >
> > relevant kernel boot messages:
> > | ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
> > | ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
> > | scsi0 : ata_piix
> > | ata1.00: ATA-7: ST3120814A, 3.AAJ, max UDMA/100
> > | ata1.00: 234441648 sectors, multi 8: LBA48
> > | ata1.00: configured for UDMA/100
> > | scsi1 : ata_piix
> > | ata2.00: ATAPI, max UDMA/33
> > | ata2.01: ATAPI, max UDMA/33
> > | ata2.00: configured for UDMA/33
> > | ata2.01: configured for UDMA/33
> > | scsi 0:0:0:0: Direct-Access     ATA      ST3120814A       3.AA PQ: 0 ANSI: 5
> > | SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> > | sda: Write Protect is off
> > | SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > | SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> > | sda: Write Protect is off
> > | SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > |  sda: sda1 sda2 sda4
> > | sd 0:0:0:0: Attached scsi disk sda
> > | sd 0:0:0:0: Attached scsi generic sg0 type 0
> > | scsi 1:0:0:0: CD-ROM            HP       DVD Writer 640c  CS30 PQ: 0 ANSI: 5
> > | sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> > | Uniform CD-ROM driver Revision: 3.20
> > | sr 1:0:0:0: Attached scsi generic sg1 type 5
> > | scsi 1:0:1:0: CD-ROM            SAMSUNG  CD-ROM SC-148C   B105 PQ: 0 ANSI: 5
> > | sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
> > | sr 1:0:1:0: Attached scsi generic sg2 type 5
> >
> > stripped config (well, as far of I'm sure it shouldn't matter):
> > | CONFIG_PM=y
> > | CONFIG_PM_LEGACY=y
> > |
> > | CONFIG_ACPI=y
> > | CONFIG_ACPI_PROCFS=y
> > | CONFIG_ACPI_FAN=y
> > | CONFIG_ACPI_PROCESSOR=y
> > | CONFIG_ACPI_THERMAL=y
> > | CONFIG_ACPI_BLACKLIST_YEAR=0
> > | CONFIG_ACPI_EC=y
> > | CONFIG_ACPI_POWER=y
> > | CONFIG_ACPI_SYSTEM=y
> > | CONFIG_X86_PM_TIMER=y
> > |
> > | CONFIG_PCI=y
> > | CONFIG_PCI_GOANY=y
> > | CONFIG_PCI_BIOS=y
> > | CONFIG_PCI_DIRECT=y
> > | CONFIG_PCI_MMCONFIG=y
> > | CONFIG_PCIEPORTBUS=y
> > | CONFIG_PCIEAER=y
> > | CONFIG_HT_IRQ=y
> > | CONFIG_ISA_DMA_API=y
> > |
> > | CONFIG_PNP=y
> > |
> > | CONFIG_PNPACPI=y
> > |
> > | CONFIG_CDROM_PKTCDVD=y
> > | CONFIG_CDROM_PKTCDVD_BUFFERS=8
> > |
> > | CONFIG_IDE=y
> > |
> > | CONFIG_RAID_ATTRS=y
> > | CONFIG_SCSI=y
> > | CONFIG_SCSI_PROC_FS=y
> > |
> > | CONFIG_BLK_DEV_SD=y
> > | CONFIG_BLK_DEV_SR=y
> > | CONFIG_CHR_DEV_SG=y
> > |
> > | CONFIG_SCSI_MULTI_LUN=y
> > | CONFIG_SCSI_CONSTANTS=y
> > | CONFIG_SCSI_LOGGING=y
> > |
> > | CONFIG_SCSI_SPI_ATTRS=y
> > |
> > | CONFIG_ATA=y
> > | CONFIG_SATA_AHCI=y
> > | CONFIG_ATA_PIIX=y
> > | CONFIG_SATA_INTEL_COMBINED=y
> > | CONFIG_SATA_ACPI=y
> > | CONFIG_PATA_SERVERWORKS=y
> >
> >
> > lspci:
> > 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
> > 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01)
> > 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
> > 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
> > 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
> > 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
> > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
> > 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
> > 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
> > 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
> > 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
> > 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)
> > 02:0c.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
> >
> > lspci -v -v -v for IDE
> > 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
> >         Subsystem: Dell Unknown device 0142
> >         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> >         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> >         Latency: 0
> >         Interrupt: pin A routed to IRQ 17
> >         Region 0: I/O ports at 01f0 [size=8]
> >         Region 1: I/O ports at 03f4 [size=1]
> >         Region 2: I/O ports at 0170 [size=8]
> >         Region 3: I/O ports at 0374 [size=1]
> >         Region 4: I/O ports at ffa0 [size=16]
> >         Region 5: Memory at 50100000 (32-bit, non-prefetchable) [size=1K]
> >

I added this  to the list of known regressions
http://kernelnewbies.org/known_regressions

Alan CC'ed.

Regards,
Michal

-- 
Michal K. K. Piotrowski
Kernel Monkeys
(http://kernel.wikidot.com/start)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/